Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Warmwood vanity sink base gives you a 42 inch wide, 30-1/2 inch high, 21 inch deep cabinet sized for a vanity sink layout, so you can plan a warm wood bathroom run with known, repeatable dimensions. The recessed panel Warmwood design matches the Kitchen Kompact line identity, so this WWV42S cabinet ties into other Warmwood units on the same wall without visual surprises. Door frames use mortised and tenoned construction of solid 3/4 inch maple, creating a rigid door that stays square in daily use. A flat panel plywood insert with a three-ply rotary cut hard maple veneer face delivers a true flat center panel, helping doors close cleanly against the face frame. Solid wood corner blocks are glued and power nailed, giving the case added strength where side, bottom, and front meet for everyday load handling in a vanity setting.
This Kitchen Kompact vanity sink base uses solid wood hanging strips on the top and bottom, giving dedicated fastening zones when you position the 42 inch cabinet against wall framing. The cabinet height of 30-1/2 inches and depth of 21 inches define the footprint that must align with the vanity top and plumbing, so rough-in dimensions can be coordinated around that case size. The Warmwood finish is built using a stain, sealer, sanding, and catalyzed top coat sequence, so the coating system is layered for color development and surface continuity across doors and frames. Door frames in 3/4 inch solid maple with mortise and tenon joints provide firm hinge anchoring, which supports repeatable door alignment after installation.
The Kitchen Kompact WWV42S vanity sink base is sized at 42 inches wide, so it is suited to vanity layouts that call for a wider sink base in a bathroom run. Its 21 inch depth places the front edge in a standard vanity footprint, which helps align the cabinet with common top depths. The 30-1/2 inch height sets the base position under a chosen vanity top height, defining where sink and faucet will sit relative to the floor. The recessed panel Warmwood door style and maple flat panel face let this cabinet visually connect to other Kitchen Kompact Warmwood units, which helps create a consistent look when combined with coordinating cabinets in the same space.
Mortise and tenon cabinet door frames in solid 3/4 inch maple provide strong joints at each corner, so the doors resist twisting that can throw off hinge adjustment over time. The three-ply flat panel plywood insert with rotary cut hard maple veneer face supplies a stable center panel, which helps maintain a consistent gap between doors for a clean front. Solid wood corner blocks that are glued and power nailed tie cabinet sides and bottom together, helping the case resist racking forces from countertop load or daily door use. Solid wood hanging strips on both top and bottom offer dedicated structural members for anchoring, so mounting loads travel through solid wood rather than thin panels. The four step Warmwood finish process - stain, sealer, sanding, and catalyzed top coat - builds a multi-layer coating, supporting color uniformity and a smooth surface across frame and panel. Concealed, self-closing hinges pull doors to the closed position, helping them land consistently against the cabinet front without external hinge hardware interrupting the Warmwood recessed panel look.
The Kitchen Kompact Warmwood vanity sink base measures 42 inches wide, 30-1/2 inches high, and 21 inches deep, which defines the footprint for matching a vanity top and aligning bathroom plumbing.
The door frames use mortised and tenoned construction of solid 3/4 inch maple, creating strong, square corners that help hinges hold alignment and keep doors operating smoothly over time.
The Warmwood recessed panel door uses a flat panel plywood insert made as a three-ply panel with a rotary cut hard maple veneer face, supporting a stable, flat center panel appearance.
The Warmwood finish uses a four step process of stain, sealer, sanding, and a catalyzed top coat, building a layered coating system for consistent color and surface feel on the cabinet.
Solid wood corner blocks are glued and power nailed at the corners, reinforcing the cabinet structure so it better handles everyday vanity loads at the joints.
Concealed, self-closing hinges keep hardware hidden when doors are shut and pull the doors closed, giving a clean front and a controlled close in regular bathroom use.
The Kitchen Kompact Warmwood vanity sink base WWV42S combines a 42 inch wide, 30-1/2 inch high, 21 inch deep case with mortise and tenon 3/4 inch maple doors, three-ply maple veneer flat panels, and solid wood corner blocks, giving you a defined, structurally focused option for a vanity sink location. Solid wood hanging strips on top and bottom, concealed self-closing hinges, and the four step Warmwood finish process add practical installation and appearance advantages when you are laying out a Warmwood bathroom run around this sink base.
Sold In: 1 Each