Kitchen Kompact Chadwood drawer base is a 24 inch wide, 34-1/2 inch high, 24 inch deep cabinet designed as a drawer base for kitchen layouts that need a defined footprint. The cabinet is part of the Kitchen Kompact line, so it matches other Kitchen Kompact pieces in material and construction for consistent runs. The recessed panel style ties directly to the Chadwood design, giving a specific look that can carry through an entire kitchen line. This cabinet is built as a drawer base, so it is suited for organizing items below the countertop in a standard base run. The size allows it to slot into common 24 inch base openings in straight runs or L-shaped layouts where installers plan around these nominal dimensions.
This Kitchen Kompact CW24D cabinet is specified at 24 inches wide, 34-1/2 inches high, and 24 inches deep, so it fits standard base cabinet footprints where countertops are planned around those dimensions. The door frames are solid 3/4 inch oak in a mortised and tenoned construction, so hinge mounting points sit in solid wood for consistent door swing. Concealed, self-closing hinges are part of the door design, so door movement is controlled and returns the door to the closed position without exposed hinge hardware on the face. Oak flat panel doors with a recessed panel profile tie visually to the Chadwood style while carrying the stain and catalyzed top coat system across the front of the cabinet for a unified look.
The Kitchen Kompact 24 inch wide, 34-1/2 inch high, 24 inch deep Chadwood drawer base works in kitchen base runs that are laid out on standard 24 inch deep footprints, so it aligns with common countertop depths. As a Kitchen Kompact product, it sits within the Kitchen Kompact cabinet family, so it can be combined with other pieces in that class to build continuous banks of cabinets with matching materials and finishes. The recessed panel style and oak flat panel doors present the Chadwood profile, which lets the same door look repeat from base to wall cabinets. The three-ply flat panel insert with a rotary cut red oak veneer face gives an oak grain presentation, so stain and sealer in the 4 step finish system sit on an oak veneer surface along the panel.
Solid wood hanging strips located on the top and bottom of the cabinet box establish defined areas for fastening, which helps an installer position the cabinet securely in a run. Solid wood corner blocks that are glued and power nailed link the cabinet sides at the corners, which supports the integrity of the box as it is handled into place and tied to other cabinets. The combination of mortised and tenoned solid 3/4 inch oak door frames and concealed, self-closing hinges means the door edges and hinge screws engage solid oak, supporting daily door cycling along a kitchen line. Adjustable shelves inside the cabinet provide flexibility so stored kitchen items can be repositioned as needs change without altering the cabinet structure.
The mortised and tenoned construction in the solid 3/4 inch oak door frames provides precise joinery, which helps the door remain square against the face frame so reveals stay consistent along a bank of Chadwood cabinets. Because the corner blocks are solid wood that are glued and power nailed, the case holds its geometry as it is clamped to adjoining cabinets, supporting straight alignment along the front. The three-ply flat panel plywood insert with its rotary cut red oak veneer face offers a balanced panel that responds evenly to normal interior conditions, which supports the stability of the recessed panel appearance over time.
The 4 step finishing process - stain, sealer, sanding, and catalyzed top coat - builds a layered finish on the oak surfaces, which supports color consistency from cabinet to cabinet within a project. Solid wood hanging strips at the top and bottom define linear mounting surfaces, assisting in keeping the cabinet level and plumb when tying it into wall framing and neighboring cabinets. Concealed, self-closing hinges keep the hardware out of view on the exterior face while controlling the door close, which contributes to a clean frontal appearance and predictable closing action along a full kitchen run. Adjustable shelves inside allow the same 24 inch deep footprint to support different storage layouts, so installers and users can adapt the interior without changing the cabinet body.
The Kitchen Kompact CW24D drawer base measures 24 inches wide, 34-1/2 inches high, and 24 inches deep, so it fits standard base cabinet and countertop layouts that use these nominal dimensions.
The door frames are solid 3/4 inch oak in a mortised and tenoned construction, giving solid wood around the perimeter for hinge mounting and helping the door stay square in everyday use.
The recessed panel uses a three-ply flat panel plywood insert with a rotary cut red oak veneer face, providing a stable center panel with an oak surface for the Chadwood finish.
This cabinet uses concealed, self-closing hinges, so the hinge hardware stays hidden from the front while controlling the closing action for a cleaner cabinet appearance.
The cabinet receives a 4 step process of stain, sealer, sanding, and catalyzed top coat, creating a multi-layer finish system across the oak surfaces for consistent color and sheen.
Solid wood hanging strips at the top and bottom and solid wood corner blocks that are glued and power nailed help the cabinet hold alignment when fastening into a cabinet run.
The Kitchen Kompact Chadwood drawer base CW24D combines a 24 inch wide, 34-1/2 inch high, 24 inch deep footprint with mortised and tenoned solid 3/4 inch oak door frames, three-ply oak veneer flat panel inserts, and a 4 step finish system centered on stain and catalyzed top coat. Solid wood corner blocks, solid wood hanging strips, adjustable shelves, concealed self-closing hinges, and oak flat panel doors position this cabinet as a defined base unit for building out Chadwood kitchen runs. Use this CW24D cabinet when the project calls for a dedicated drawer base in the Kitchen Kompact Chadwood style at a standard 24 inch depth.
Sold In: 1 Each