Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Glenwood vanity base cabinet identifies this unit as a 12 inch wide, 32-1/2 inch high, 21 inch deep recessed panel base that fits typical narrow vanity runs where space is tight but full-depth storage is still needed. The Glenwood name and GWV12B part number tie this cabinet directly to the Glenwood line, which keeps ordering consistent across a bathroom layout using matching components. The recessed panel front defines the face style, so an installer can match door and drawer aesthetics with other Glenwood units on the same wall. Being a base cabinet, it is sized for floor mounting and for supporting a countertop, which simplifies planning rough heights and finished vanity lines.
The 12 inch width on this Glenwood vanity base cabinet sets it up for narrow spaces, allowing installers to finish off a run or create a slim single-bowl layout where room is limited. The 32-1/2 inch height works within standard vanity height ranges once a countertop is added, which simplifies alignment with adjacent cabinets of the same line. At 21 inches deep, the cabinet matches common vanity depths, so it integrates into typical bathroom footprints without special framing. Solid wood hanging strips at the top and bottom of the base cabinet back establish clear structural areas for fastening to wall framing, helping transfer the load of the cabinet and countertop into the wall plane.
The Kitchen Kompact 12 inch wide GWV12B Glenwood vanity base cabinet is suited to bathrooms where a narrow footprint is required but full-depth storage is still desired. Its base cabinet design means it is intended for floor installation with a countertop, placing the working surface at a practical vanity height when paired with a compatible top. The recessed panel style coordinates with the Glenwood line, so it fits well in projects where multiple Glenwood units are aligned along the same wall and a consistent front profile is important. The 21 inch depth aligns with common bathroom layouts, allowing this cabinet to run alongside other standard-depth pieces without stepping in or out from the finished line of the vanity.
The solid 3/4 inch oak, maple, or beech frame on this Glenwood vanity base cabinet gives installers a rigid reference for setting reveals and aligning doors, which helps reduce adjustment passes after installation. Kiln-dried rails joined by mortise and tenon and then glued create tight joints that hold their shape, so hinge and drawer clearances remain more consistent through normal seasonal changes. Solid wood corner blocks that are both glued and power nailed reinforce the cabinet at key load points, supporting countertop weight and everyday use without the cabinet twisting under load. The 3/4 inch thick solid wood toe kicks deliver a sturdy lower section that tolerates contact from feet and cleaning tools, reducing the risk of damage in the high-contact area near the floor. Solid wood hanging strips, located at the top and bottom of the cabinet back, provide strong structural zones for fastening, which helps the cabinet sit solidly against the wall and support the combined weight of storage and countertop. The 3-ply end panels with a 1/2 inch thick engineered wood core and hardwood veneers add dimensional stability while presenting a hardwood outer surface, which is useful when an end is exposed and needs to match the rest of the Glenwood line visually.
The GWV12B Glenwood vanity base cabinet measures 12 inches wide, 32-1/2 inches high, and 21 inches deep, which fits common narrow vanity layouts while maintaining standard vanity depth.
The Kitchen Kompact Glenwood vanity base cabinet uses solid 3/4 inch oak, maple, or beech frames, providing a hardwood structure that resists racking and supports aligned doors and fronts.
The frame rails on this Glenwood vanity are kiln-dried, joined with mortise and tenon, and glued, giving tight joints that help maintain face alignment through normal seasonal movement.
The vanity uses 3/4 inch thick solid wood toe kicks, creating a sturdy lower front that handles foot contact and cleaning without the flex of thinner materials.
End panels on this Glenwood vanity use 3-ply construction with a 1/2 inch thick engineered wood core and hardwood veneers, balancing stability with a finished hardwood surface.
The Glenwood vanity base cabinet has solid wood hanging strips located at the top and bottom, providing defined structural zones for mounting to wall framing.
This Kitchen Kompact Glenwood 12 inch wide, 32-1/2 inch high, 21 inch deep vanity base cabinet combines a recessed panel style with hardwood frame construction for bathroom layouts using the Glenwood line. Solid 3/4 inch oak, maple, or beech frames, kiln-dried mortise and tenon rails, solid wood corner blocks, and 3/4 inch toe kicks provide a robust structure that supports countertop and everyday use. With 3-ply end panels and solid wood hanging strips at the back, this GWV12B cabinet gives a stable base component for narrow vanity runs where consistent appearance and structural integrity are both priorities.
Sold In: 1 Each