Kitchen Kompact Glenwood vanity base cabinet is a 12 inch wide, 34-1/2 inch high, 21 inch deep cabinet built for bathroom vanity runs where a narrow base is needed in a consistent line of Glenwood units. The recessed panel design identifies it as part of the Glenwood style series, so it visually matches other Glenwood pieces in the same job. The cabinet is branded Kitchen Kompact and classified in their cabinet line, so it fits into standard kitchen or bath layouts using this manufacturer. The frame is built around these fixed dimensions, giving installers a predictable footprint when planning clearances, adjacent cabinets, and countertop support. The Glenwood designation tied to part number GWV12BT helps specifiers align this base with drawings and material lists. Overall dimensions and style naming together keep takeoffs, ordering, and on-site layout working from the same reference point.
The Glenwood V12BT vanity base uses a frame built from solid 3/4 inch oak, maple, or beech, so the face frame offers a solid reference edge when aligning doors and setting reveals. Kiln-dried rails joined with mortise and tenon joints and then glued form a stable frame that holds square as the cabinet is clamped, leveled, and fastened to walls or adjoining units. Solid wood hanging strips at both the top and bottom on base cabinets create continuous structural members for driving fasteners into framing, which supports a firm anchor without relying on panel material alone. The 3/4 inch thick solid wood toe kick acts as a robust base edge at the floor line, so the cabinet tolerates shimming and leveling while carrying the load of the installed top.
The GWV12BT Glenwood vanity base cabinet measures 12 inches wide, 34-1/2 inches high, and 21 inches deep, so it fits locations where a narrow base is needed in a standard-depth bath or similar layout. The recessed panel style connects it to the Glenwood design family, which helps maintain a consistent look when it is installed alongside matching cabinets in a run. Solid wood corner blocks that are glued and power nailed reinforce the box, so it stays square while being moved into tight alcoves or set between other units. End panels built with 3-ply construction around a 1/2 inch engineered wood core and hardwood veneers give the sides dimensional stability, which helps keep reveals and finished edges looking straight along walls or next to other cabinetry.
The solid 3/4 inch oak, maple, or beech frame on this Kitchen Kompact vanity base provides a durable reference surface for hinges and front alignment, which helps doors operate correctly over time. Kiln-dried rails assembled with mortise and tenon joints and glue limit movement in the frame, supporting consistent gaps and reduced rework after installation. Solid wood hanging strips at both the top and bottom on base cabinets distribute mounting forces along sturdy members, so fasteners bite into solid wood for a dependable hold in stud walls. The 3/4 inch thick solid wood toe kick tolerates adjustments at the floor while bearing cabinet and top loads, which supports long-term stability. The 3-ply end panels with a 1/2 inch engineered wood core and hardwood veneers stay flatter than single-ply boards, helping finished faces remain true where they meet countertops and adjacent surfaces.
The GWV12BT Glenwood vanity base cabinet is 12 inches wide, 34-1/2 inches high, and 21 inches deep, so it occupies a narrow footprint while matching standard vanity height and depth in typical layouts.
The cabinet frame is built of solid 3/4 inch oak, maple, or beech, providing a strong structure that supports doors, fronts, and hardware under everyday opening, closing, and loading.
Each rail is kiln-dried, joined by mortise and tenon, and glued, creating tight joints that resist racking when the cabinet is fastened into place and tied to neighboring units.
The 3/4 inch thick solid wood toe kick forms a sturdy base area that carries cabinet and top loads while allowing shimming at the floor for accurate leveling.
Solid wood hanging strips on base cabinets, located at the top and bottom, provide reliable fastening zones so installers can secure the cabinet directly into framing.
The end panels use 3-ply construction with a 1/2 inch engineered wood core and hardwood veneers, giving flat, stable sides that accept finishes and align cleanly with adjacent elements.
This Kitchen Kompact Glenwood V12BT vanity base cabinet combines a solid 3/4 inch oak, maple, or beech frame with kiln-dried, mortise-and-tenon rails, so it delivers a rigid box sized at 12 inches wide, 34-1/2 inches high, and 21 inches deep. Solid wood corner blocks, solid wood toe kicks, and solid wood hanging strips at the top and bottom on base cabinets create a structure ready for anchoring, shimming, and supporting tops in everyday bathroom layouts. End panels with a 3-ply, 1/2 inch engineered wood core and hardwood veneers give stable, finished sides suited to visible runs. Use this Glenwood vanity base where a narrow, style-matched cabinet is required in a Glenwood design project.
Sold In: 1 Each