Kitchen Kompact Chadwood wall cabinet CW36WT is a 36 inch wide, 36 inch high and 12 inch deep oak wall cabinet that provides wall-mounted storage in a kitchen layout. The cabinet uses a recessed panel Chadwood door style, so the face of the cabinet matches other Chadwood flat panel fronts in the same line. Door frames are mortised and tenoned construction of solid 3/4 inch oak, creating tight joints at the corners that support the recessed panel over repeated door use. A flat panel plywood insert is a three-ply panel with a rotary cut red oak veneer face, giving the door a red oak appearance while using a plywood core that stays stable. Solid wood corner blocks are glued and power nailed to reinforce the case, which helps the cabinet stay square once it is fastened on the wall. Solid wood hanging strips located on the top and bottom give you defined structural points to fasten through when mounting the cabinet to wall studs.
This Kitchen Kompact wall cabinet measures 36 inches wide, 36 inches high and 12 inches deep, so it fits standard upper cabinet runs where a 12 inch deep wall unit is required. Solid wood hanging strips located on the top and bottom of the cabinet back present full-width fastening areas, which helps transfer cabinet load into the wall when you drive fasteners through those strips. Solid wood corner blocks that are glued and power nailed back up the joints between panels, supporting the box while it is temporarily supported during mounting. Door frames built from solid 3/4 inch oak with mortised and tenoned joints support the concealed, self-closing hinges, so the hinges operate on a solid door frame edge. The self-closing hinges pull the oak flat panel doors shut, bringing them back to the same resting position after access and helping keep reveals consistent across a run of Chadwood wall cabinets.
The Kitchen Kompact Chadwood 36 inch wide by 36 inch high by 12 inch deep wall cabinet is used as an upper cabinet in kitchen layouts that follow the Kitchen Kompact Chadwood line. Its recessed panel Chadwood door style lets it align visually with other Kitchen Kompact cabinets that share the Chadwood flat panel look. The 12 inch depth matches standard upper cabinet depth, which helps this cabinet sit flush in a typical wall run over bases. The three-ply flat panel plywood insert with a rotary cut red oak veneer face presents a red oak appearance across the front, so the door surface reads as red oak when installed next to other red oak-faced pieces. Adjustable shelves inside the cabinet let you use the full 36 inch height by setting shelf positions to line up with typical dish heights or pantry goods in that run.
Door frames in this Chadwood wall cabinet use mortised and tenoned construction of solid 3/4 inch oak, so each corner joint interlocks and supports hinge loading over time. That solid 3/4 inch oak frame gives the concealed, self-closing hinges a firm anchor, which helps keep doors tracking correctly and returning to the same closed plane in a lineup of wall cabinets. Solid wood hanging strips at the top and bottom of the back run full width, creating predictable fastening zones that make it easier to set multiple CW36WT units in a straight line. When you fasten through those strips, the cabinet ties into wall framing along the full cabinet width, which supports both the cabinet box and the adjustable shelves with stored contents. Solid wood corner blocks that are glued and power nailed hold the cabinet square during handling, so when you clamp and pull cabinets together in a run, the faces stay aligned. The 4 step process of stain, sealer, sanding and catalyzed top coat gives the oak and red oak veneer faces a completed finish system, so once the cabinet is hung and doors adjusted you already have a uniform surface that works alongside adjacent Kitchen Kompact Chadwood pieces.
The Kitchen Kompact Chadwood wall cabinet measures 36 inches wide, 36 inches high and 12 inches deep, so it matches standard 12 inch deep upper cabinet runs.
The Chadwood door frames are mortised and tenoned construction of solid 3/4 inch oak, which provides interlocking joints that help doors stay aligned under everyday hinge loading.
The recessed panel is a flat panel plywood insert that is a three-ply panel with a rotary cut red oak veneer face, giving a red oak appearance with a stable plywood core.
Solid wood corner blocks are glued and power nailed, tying cabinet panels together so the box resists twisting during handling and after installation on the wall.
The cabinet receives a 4 step process of stain, sealer, sanding and catalyzed top coat, creating a finished surface system on the oak and red oak veneer faces.
The cabinet uses concealed, self-closing hinges on the oak flat panel doors and provides adjustable shelves, which support clean front appearance and flexible interior storage layout.
The Kitchen Kompact Chadwood 36 inch by 36 inch by 12 inch wall cabinet CW36WT provides a recessed panel oak upper unit that matches the Chadwood style. Mortised and tenoned solid 3/4 inch oak door frames, a three-ply red oak veneer panel and solid wood corner blocks create a cabinet suited to wall mounting in a Kitchen Kompact layout. Solid wood hanging strips at the top and bottom back give you defined fastening areas when setting this cabinet in a run. Specify this CW36WT unit when you need a 36 inch wide Chadwood wall cabinet with adjustable shelves, concealed self-closing hinges and the Kitchen Kompact stain, sealer, sanding and catalyzed top coat system.
Sold In: 1 Each