Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Chadwood wall cabinet CW27WT is a 27 inch wide, 36 inch high, 12 inch deep recessed panel wall cabinet built for standard upper-kitchen runs where consistent sizing keeps layouts predictable. The cabinet uses door frames with mortised and tenoned construction of solid 3/4 inch oak, so the joints lock together mechanically for a rigid door frame that stays square when repeatedly opened and closed. Flat panel plywood inserts are three-ply panels with a rotary cut red oak veneer face, giving a stable center panel with an oak surface that finishes uniformly across multiple cabinets in the same run. Solid wood corner blocks are glued and power nailed, tying the cabinet box corners together so the case resists racking when mounted to wall studs. The Chadwood recessed panel style keeps the wall cabinet visually compatible with other Kitchen Kompact Chadwood units in the same project.
This Kitchen Kompact Chadwood 27 inch wall cabinet uses solid wood hanging strips located on the top and bottom, giving two continuous mounting rails that accept fasteners into wall framing across the cabinet width. Solid wood corner blocks are glued and power nailed, so the case holds its shape when pulled tight to the wall during installation. Door frames are mortised and tenoned solid 3/4 inch oak, supporting stable hinging and helping doors stay true on their concealed, self-closing hinges under everyday use. Adjustable shelves inside the cabinet can be set to different positions, allowing the interior to be configured after the cabinet is mounted.
The Kitchen Kompact Chadwood CW27WT wall cabinet is sized at 27 inches wide, 36 inches high, and 12 inches deep, so it fits standard upper cabinet runs where 36 inch height is desired for wall storage over base cabinets or worktops. The recessed panel Chadwood style with flat panel plywood inserts featuring a rotary cut red oak veneer face ties visually with other Chadwood pieces, supporting consistent door profiles across a full kitchen or similar project. Door frames built from solid 3/4 inch oak with mortised and tenoned construction suit environments where wood doors are expected to open and close frequently without the joints loosening easily. Solid wood corner blocks that are glued and power nailed, together with solid wood hanging strips on the top and bottom, support use in wall-mounted locations where the cabinet must stay square and secure for the life of the installation.
The mortised and tenoned solid 3/4 inch oak door frames on this Kitchen Kompact Chadwood wall cabinet create precise mechanical joints at the corners, which helps the doors maintain gap alignment along a run of cabinets and reduces adjustments over time. Flat panel plywood inserts built as three-ply panels with a rotary cut red oak veneer face provide dimensional stability in the recessed center panel while presenting an oak face that finishes in a coordinated tone with neighboring Chadwood units. Solid wood corner blocks that are glued and power nailed connect the cabinet sides, top, and bottom, so when the cabinet is tightened against wall framing the box resists twisting that could throw doors out of parallel. Solid wood hanging strips on both the top and bottom give defined fastening zones that run the cabinet width, helping installers place fasteners into framing at multiple points for even support. A 4 step process of stain, sealer, sanding and catalyzed top coat is applied at the factory, so the cabinet arrives with the finish system already built up in layers designed for kitchen environments. Concealed, self-closing hinges on the oak door frames keep hardware hidden when doors are closed while drawing the doors shut at the end of travel, supporting consistent door positioning along the face of a cabinet line. Adjustable shelves inside the cabinet respond well when storage needs change, because shelf positions can be altered without modifying the cabinet structure.
The Kitchen Kompact Chadwood CW27WT wall cabinet measures 27 inches wide, 36 inches high, and 12 inches deep, so it matches common upper-cabinet sizing in many kitchen layouts.
The cabinet doors use mortised and tenoned construction of solid 3/4 inch oak for the frames, giving strong corner joints that help the doors stay square and aligned in regular use.
The recessed doors use flat panel plywood inserts made as three-ply panels with a rotary cut red oak veneer face, providing a stable core and an oak surface for a coordinated appearance.
The CW27WT cabinet has solid wood hanging strips located on the top and bottom, creating continuous mounting rails that accept fasteners into wall framing across the cabinet width.
The cabinet receives a 4 step process of stain, sealer, sanding and catalyzed top coat, providing a layered finish system suitable for typical kitchen cabinet environments.
The Kitchen Kompact Chadwood wall cabinet uses concealed, self-closing hinges on the doors and has adjustable shelves inside, supporting clean door faces and flexible interior storage.
The Kitchen Kompact Chadwood 27 inch wide, 36 inch high, 12 inch deep wall cabinet CW27WT combines mortised and tenoned solid 3/4 inch oak door frames, flat panel plywood inserts with a rotary cut red oak veneer face, and solid wood corner blocks that are glued and power nailed. Solid wood hanging strips on the top and bottom, concealed self-closing hinges, adjustable shelves, and a 4 step process of stain, sealer, sanding and catalyzed top coat align this cabinet with typical kitchen wall applications where consistent fit and coordinated appearance across multiple units are important.
Sold In: 1 Each