Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Glenwood wall cabinet identifies this unit as part of the Kitchen Kompact cabinet line, which matters when matching existing runs or planning a consistent kitchen layout. The 30 inch W x 24 inch H x 12 inch D size defines the cabinet envelope, so it fits standard wall cabinet rows and keeps layout predictable over counters or work areas. The recessed panel Glenwood door style ties the look back to the GLENWOOD 30Z description, helping maintain visual continuity across other Glenwood cabinets on the same project. The manufacturer part number GW30Z ties directly to the product class Kitchen Kompact, which keeps ordering, reordering, and job documentation straightforward on multi-cabinet installations. The wall cabinet designation aligns with the solid wood hanging strips detail, so this unit is intended for wall mounting in a kitchen configuration.
The 30 inch wide, 24 inch high, 12 inch deep sizing gives this wall cabinet proportions that align with common kitchen layouts above counters and work zones. Solid wood hanging strips on wall cabinets, located at the top and bottom, provide continuous structural backing where fasteners engage wall framing, supporting the cabinet load. Solid wood corner blocks that are glued and power nailed tie the cabinet box to those hanging strips, so load transfer from stored contents and the door goes into reinforced corners. The 3/4 inch thick solid wood frames around the front opening work with these structural elements, keeping the cabinet square during mounting and when tightening fasteners.
The 30 inch W x 24 inch H x 12 inch D Glenwood wall cabinet size suits upper cabinet runs where vertical space is limited but standard depth is required over counters. The Kitchen Kompact product class and Glenwood name connect it with other Kitchen Kompact Glenwood components on the same job, so designers can repeat the same frame and door style. Solid wood hanging strips on wall cabinets at the top and bottom set up predictable fastening lines along the back, which is helpful when laying out stud locations in relation to cabinet joins. End panels built with a 3 ply, 1/2 inch engineered wood core and hardwood veneers give the exposed sides a hardwood appearance, supporting use on run ends or over appliances where sides are visible.
All frames built of solid 3/4 inch oak, maple or beech create a rigid face structure, which helps doors align and stay aligned across multiple Glenwood 30Z cabinets. Each rail being kiln-dried, joined by mortise and tenon, and then glued for added strength means the front frame joints resist movement, so reveal lines remain consistent along a run. Solid wood corner blocks that are glued and power nailed reinforce the cabinet where installers typically handle the box and where wall loads concentrate, which supports repeatable mounting without distorting the case. The 3 ply end panels with a 1/2 inch engineered wood core and hardwood veneers combine core stability with a hardwood veneer surface, so side faces stay flat while visually matching the solid wood frame. Solid wood toe kicks, 3/4 inch thick, coordinate with base cabinets in the Kitchen Kompact line, helping maintain a continuous appearance when this wall unit is paired with base units in the same kitchen.
The Kitchen Kompact Glenwood wall cabinet measures 30 inches wide, 24 inches high, and 12 inches deep, which fits many standard wall cabinet layouts over counters.
The cabinet frame is built of solid 3/4 inch oak, maple, or beech with kiln-dried rails joined by mortise and tenon and glued, providing a rigid front structure for doors.
The solid wood hanging strips on wall cabinets, located at the top and bottom, offer continuous solid backing for fasteners, which supports secure mounting to framing.
The end panels use 3 ply construction with a 1/2 inch engineered wood core and hardwood veneers, providing a stable core with a hardwood exterior surface.
The cabinet uses solid wood corner blocks that are glued and power nailed, reinforcing high-stress areas where wall loads and door movement are concentrated.
The manufacturer part number GW30Z identifies this specific Kitchen Kompact Glenwood 30 inch W x 24 inch H x 12 inch D wall cabinet model for ordering and documentation.
The Kitchen Kompact Glenwood 30 inch W x 24 inch H x 12 inch D wall cabinet combines a solid 3/4 inch wood frame with kiln-dried mortise and tenon rails, solid wood corner blocks, and 3 ply hardwood veneer end panels, forming a consistent construction package. The solid wood hanging strips on wall cabinets at the top and bottom support straightforward fastening to wall framing across a run. For projects using the Glenwood style within the Kitchen Kompact line, this GW30Z wall cabinet provides a defined size and construction pattern that aligns with matching base and wall units on the same job.
Sold In: 1 Each