Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact 36 inch wall cabinet identifies this Glenwood GW36Z unit as a 36 inch wide, 24 inch high, 12 inch deep wall cabinet, so it fits typical upper-cabinet runs where that footprint is required. The recessed panel Glenwood design gives a consistent door style across the Kitchen Kompact line, which helps installers keep a uniform look across adjoining cabinets. All frames are built of solid 3/4 inch oak, maple or beech, so the frontal structure carries door loads on solid hardwood instead of thinner stock, which is useful when doors see daily use. This cabinet sits in the Kitchen Kompact category, tying it directly to a known kitchen cabinet program that many shops already specify. The manufacturer part number GW36Z clearly identifies this specific Glenwood 36Z model, which helps with ordering accuracy when matching existing layouts or replacing a single wall cabinet.
Solid wood hanging strips on this wall cabinet are located at the top and bottom, so installers have two continuous hardwood bands to fasten through into framing, which simplifies layout of fastener positions. The solid 3/4 inch frame gives a straight reference for aligning doors and adjacent cabinets, because a thicker hardwood frame tends to stay flatter under load. Solid wood corner blocks that are glued and power nailed help the cabinet box hold its squareness, reducing the need to fight twists when setting reveals against neighbors. End panels built as 3 ply with a 1/2 inch engineered wood core and hardwood veneers give a stable side panel, which helps keep seams tight when lining up with another cabinet or a wall.
The Kitchen Kompact Glenwood wall cabinet at 36 inches wide, 24 inches high, and 12 inches deep fits common upper cabinet layouts over base units and work areas. The recessed panel Glenwood style ties into other Kitchen Kompact pieces, so the 36Z cabinet can sit between matching units while maintaining a continuous door design. All frames built of solid 3/4 inch oak, maple or beech give a substantial front edge, which is useful when this cabinet anchors a longer wall run or terminates at a window or corner. Solid wood hanging strips at the top and bottom provide continuous hardwood across the width, so the cabinet can be secured at several points along a stud layout, which is important when this 36 inch cabinet is used to carry stored items across a wider span.
Each rail on the Glenwood GW36Z cabinet is kiln-dried, joined by mortise and tenon, and then glued for added strength, so the frame joints start tight and stay strong, which helps maintain consistent door gaps after installation. Solid wood corner blocks that are glued and power nailed tie the frame, sides, and top or bottom together, which helps the box resist twisting when shimming against an uneven wall. End panels with 3 ply construction around a 1/2 inch engineered wood core and hardwood veneers resist warping while still offering a hardwood veneer face, which supports cleaner seams when cabinets are ganged. Solid wood toe kicks at 3/4 inch thickness on coordinating base cabinets in the same Kitchen Kompact line align visually and structurally with this wall unit, supporting straight lines from toe space to upper cabinet bottoms in a finished kitchen.
The Kitchen Kompact 36 inch wall cabinet measures 36 inches wide, 24 inches high, and 12 inches deep, so it matches standard upper cabinet depths and fits typical 36 inch wall openings.
The GW36Z frame is built of solid 3/4 inch oak, maple or beech, providing a hardwood structure that holds hinges and helps keep door alignment stable in everyday kitchen use.
The Glenwood 36Z rails are kiln-dried, joined by mortise and tenon, and glued, forming strong joints that help the face frame resist racking during installation and long-term service.
The GW36Z uses solid wood corner blocks that are glued and power nailed, tying the sides to the frame and rails so the box stays square under hanging and loading.
End panels use 3 ply construction with a 1/2 inch thick engineered wood core and hardwood veneers, giving a stable side panel with a hardwood veneer surface ready for finishing.
The Kitchen Kompact GW36Z wall cabinet has solid wood hanging strips located at the top and bottom, providing continuous fastening areas when securing the cabinet to wall framing.
The Kitchen Kompact 36 inch wall cabinet Glenwood GW36Z combines a solid 3/4 inch hardwood frame, mortise and tenon joints, and 3 ply end panels around a 1/2 inch engineered wood core, giving installers a defined 36 by 24 by 12 cabinet footprint. Solid wood hanging strips at both the top and bottom support reliable fastening across the span, while glued and power nailed solid wood corner blocks help the box stay square as it goes on the wall. For projects using the Glenwood recessed panel style, this GW36Z wall cabinet aligns with the broader Kitchen Kompact program, so it can be specified with confidence wherever a 36 inch upper cabinet is needed.
Sold In: 1 Each