Kitchen Kompact Warmwood base peninsula cabinet 48 inch wide by 34-1/2 inch high by 24 inch deep provides a sized base unit for peninsula layouts, which matters when laying out standard-height kitchen runs and aligning countertop depth across connected cabinets. The recessed panel design described as Warmwood gives this cabinet a specific door style and finish identity, which helps coordinate with matching Kitchen Kompact pieces in the same room. Door frames use mortised and tenoned construction of solid 3/4 inch maple, creating a jointed, solid-wood frame that supports repeated door use in busy kitchen environments. Maple flat panel doors pair solid maple framing with a flat panel plywood insert, so the visible fronts match while the panel construction manages movement. The cabinet is identified by manufacturer part number WW48B-P, which helps match this exact Warmwood base peninsula when ordering additional units or planning future replacements in the same line.
The cabinet size of 48 inch wide by 34-1/2 inch high by 24 inch deep defines this unit as a full-depth base peninsula, so it lines up with standard counter depth and height in typical kitchen layouts. The Warmwood recessed panel style described in the product name aligns with the maple flat panel door construction, allowing this cabinet to sit at the end of a run while matching other Warmwood base or wall units visually. Solid wood toe kicks at 3/4 inch thick run along the base, supporting the finished look at floor level and carrying load from the cabinet box. Flat panel plywood inserts with hard maple veneer faces work with the 4 step stain, sealer, sanding and catalyzed top coat process to present a consistent Warmwood finish across the visible fronts.
This Kitchen Kompact 48 inch Warmwood base peninsula cabinet functions as a terminal base unit in kitchen layouts where a run of cabinets projects into the room, because its 24 inch depth matches typical counter depth. The 34-1/2 inch height lines up with other base cabinets in the same line, supporting a continuous work surface across connected units and the peninsula. Solid wood hanging strips located at the top and bottom create defined fastening zones along the back, so the cabinet can be tied to adjacent cabinets or structural members to hold the peninsula alignment. Solid wood corner blocks, glued and power nailed, add internal bracing at the corners, which helps keep the cabinet square when integrated into L-shaped or U-shaped kitchen plans that rely on a stable peninsula anchor point.
The mortised and tenoned solid 3/4 inch maple door frames provide a stable structure around each recessed panel opening, helping doors stay aligned relative to each other once hinges are set during installation. Concealed, self-closing hinges manage door movement at the face frame, pulling doors closed at the end of travel, which supports a uniform reveal and reduces adjustment time during final alignment. The flat panel plywood inserts with three-ply construction and hard maple veneer face keep the panel portion of the door stable, which matters in everyday use where temperature and humidity change around the cabinet. Plywood drawers, tied into a front to back epoxy-coated drawer system that is securely attached to a solid wood strip at the back of the cabinet, create a defined track path for drawer boxes, supporting consistent slide action after installation. The 4 step finish process of stain, sealer, sanding and catalyzed top coat builds a protective coating over the maple faces, which helps the Warmwood color and grain presentation stay consistent as the peninsula sees routine contact in work zones.
The Kitchen Kompact WW48B-P Warmwood base peninsula cabinet measures 48 inch wide by 34-1/2 inch high by 24 inch deep, so it aligns with standard base cabinet height and counter depth in typical kitchen layouts.
The cabinet uses mortised and tenoned solid 3/4 inch maple door frames with flat panel plywood inserts, giving each recessed panel door a solid frame and a stable maple-faced panel for everyday kitchen use.
The concealed, self-closing hinges pull doors closed at the end of travel, helping maintain consistent reveals and a clean face appearance on the Warmwood recessed panel doors during normal operation.
The Kitchen Kompact Warmwood base peninsula cabinet uses plywood drawers with a front to back epoxy-coated drawer system attached to a solid wood strip, supporting stable drawer travel during regular kitchen loading.
The Warmwood finish is applied through a 4 step process of stain, sealer, sanding and catalyzed top coat, creating a layered finish system over the maple that supports routine kitchen cleaning.
Solid wood corner blocks that are glued and power nailed, solid wood hanging strips at the top and bottom, and 3/4 inch solid wood toe kicks all contribute structural support for base peninsula placement.
The Kitchen Kompact 48 inch Warmwood base peninsula cabinet WW48B-P combines mortised and tenoned solid maple door frames, maple flat panel fronts and plywood drawers in a standard 34-1/2 inch high by 24 inch deep footprint. Solid wood corner blocks, hanging strips and 3/4 inch solid wood toe kicks provide structure suited to peninsula placement at the end of a base run. The 4 step stain, sealer, sanding and catalyzed top coat finish works with the hard maple veneer faces to present the Warmwood recessed panel style consistently across the visible faces. For projects using Kitchen Kompact Warmwood, this base peninsula cabinet offers a defined way to terminate a run and carry the same construction details through the working side of the kitchen.
Sold In: 1 Each