Kitchen Kompact base peninsula cabinet in the WW36B-P model gives you a 36 inch wide, 34-1/2 inch high, 24 inch deep Warmwood cabinet sized for peninsula layouts, so it lines up with standard base runs while turning a corner cleanly. Door frames use mortised and tenoned construction of solid 3/4 inch maple, creating tight, long-grain joints that resist racking when the doors are in daily use. Maple flat panel doors with a recessed panel design present a consistent front that matches other Warmwood cabinets in the same line. A flat panel plywood insert with a three-ply panel and rotary cut hard maple veneer face provides a stable center panel that holds finish evenly. Solid wood corner blocks are glued and power nailed, tying the cabinet box together at stress points so the case stays square during installation and over time. Solid wood hanging strips located on the top and bottom of the cabinet give you a solid anchor area across the back for mounting to typical structural surfaces.
This Kitchen Kompact WW36B-P base peninsula cabinet measures 36 inches wide, 34-1/2 inches high, and 24 inches deep, so it matches standard base cabinet depth and height for countertop runs. The cabinet is part of the Warmwood series, allowing it to fit visually into Warmwood layouts where a peninsula or end-of-run base is needed. Plywood drawers are standard, tying into the cabinet box with a front to back epoxy-coated drawer system that is securely attached to a solid wood strip in the back of the cabinet for stability, which helps the drawer track stay aligned under load. Adjustable shelves inside the cabinet let you set shelf height to match stored items, so vertical space is used effectively within the fixed exterior dimensions.
The Kitchen Kompact 36 inch Warmwood base peninsula cabinet is designed for peninsula locations where a 24 inch deep, 34-1/2 inch high cabinet must match adjacent base units. Its Warmwood finish and maple flat panel doors tie in with other Kitchen Kompact Warmwood cabinets, keeping face frames and door style consistent around corners. Solid wood toe kicks at 3/4 inch thick run along the floor line, which gives a sturdy base edge when this unit forms the start or end of a peninsula leg. Solid wood hanging strips located on the top and bottom let the cabinet be fastened along its back edge to framing or other structural members at the peninsula connection, which helps limit flex in open layouts. The combination of plywood drawers and adjustable shelves supports mixed storage at the peninsula, such as heavier drawer loads closer to work areas and taller items behind doors.
Door frames built with mortised and tenoned solid 3/4 inch maple corners help the doors resist twisting, so reveals can be set accurately during install and stay more stable along the Warmwood run. Maple flat panel doors paired with a flat panel plywood insert using a rotary cut hard maple veneer face provide a consistent maple grain canvas, which helps the Warmwood stain and catalyzed top coat read evenly from unit to unit. Solid wood corner blocks that are glued and power nailed tie the cabinet sides, front, and back together, which supports a square case during handling, shimming, and fastening at the peninsula junction. The 4 step process of stain, sealer, sanding, and catalyzed top coat gives the cabinet surfaces a layered finish, so door and drawer fronts better tolerate routine contact around busy peninsulas. The plywood drawers run on a front to back epoxy-coated drawer system that is securely attached to a solid wood strip in the back of the cabinet, which provides a solid anchor point for the slides so drawer action stays smoother under repeated loading.
The Kitchen Kompact WW36B-P Warmwood base peninsula cabinet is 36 inches wide, 34-1/2 inches high, and 24 inches deep, so it lines up with standard base cabinet height and depth in kitchen layouts.
The cabinet doors use mortised and tenoned solid 3/4 inch maple frames with maple flat panels, providing strong joints and a consistent maple appearance that matches other Warmwood pieces.
The WW36B-P uses plywood drawers with a front to back epoxy-coated drawer system securely attached to a solid wood strip at the back, supporting stable, guided drawer movement under load.
The Warmwood cabinet uses a 4 step process of stain, sealer, sanding, and catalyzed top coat, creating a multi-layer finish that holds color and surface quality during normal kitchen use.
The Kitchen Kompact WW36B-P base cabinet has adjustable shelves, allowing shelf height changes so the interior can be arranged around varying cookware, pantry goods, or other stored items.
Solid wood corner blocks that are glued and power nailed, combined with solid wood hanging strips, help the cabinet box remain square and well supported during installation and everyday use.
The Kitchen Kompact WW36B-P Warmwood base peninsula cabinet combines 36 inch by 34-1/2 inch by 24 inch sizing with mortised and tenoned solid maple door frames, maple flat panel doors, and a flat panel plywood insert with hard maple veneer. Solid wood corner blocks, solid wood hanging strips, and 3/4 inch thick solid wood toe kicks support a square, stable case in peninsula applications. Adjustable shelves and plywood drawers on a front to back epoxy-coated drawer system tied into a solid wood strip provide flexible storage inside the Warmwood layout. For Warmwood kitchen runs that turn a corner into a peninsula, this cabinet supplies the matching size, structure, and finish needed to carry the line cleanly.
Sold In: 1 Each