Kitchen Kompact 33"W x 32-1/2"H x 24"D DWhite Sink Base ADA Compliant, Recessed Panel - DWH33RBS

Kitchen Kompact DWH33RBS Sink Base For ADA Use

Kitchen Kompact DWH33RBS sink base is a 33 inch wide, 32-1/2 inch high, 24 inch deep DWhite recessed panel cabinet designed as an ADA compliant sink base. This size and height give room for plumbing while supporting accessible layouts in a standard kitchen footprint. The cabinet uses maple flat panel doors, so the door faces present a consistent maple appearance that coordinates with other maple-front cabinetry in the run. The cabinet is identified as a WHITE HANDICAP 33 RANGE/BASE/SINK, tying it directly to range, base, or sink locations where ADA compliant fronts are required. This recessed panel design works in kitchens where a clean, framed look helps align visual lines across adjacent cabinets and appliances. The cabinet is part of the Kitchen Kompact product class, providing a matched option when building out full Kitchen Kompact DWhite kitchens.

Construction Details That Support Daily Cabinet Use

• Door frames use mortised and tenoned construction of solid 3/4 inch maple, creating solid joints that help doors stay aligned through regular opening and closing in a busy kitchen.
• Flat panel plywood inserts are three-ply panels with a rotary cut hard maple veneer face, giving the recessed center panel both rigidity and a maple grain face that ties into other maple components.
• Solid wood corner blocks are glued and power nailed, adding structural support at critical inside corners so the cabinet holds square when installed under countertop loads.
• Solid wood hanging strips are located on the top and bottom, providing solid backing for fastening the cabinet to wall studs during installation.
• Adjustable shelves allow shelf positions to be changed, so interior storage can be set to the heights needed for different plumbing clearances or stored items.
• Solid wood toe kicks are 3/4 inch thick, creating a sturdy toe space area that stands up to foot contact along the base of the cabinet.

Finish, Hinges, And Drawers For Working Kitchens

The cabinet exterior follows a 4 step process of stain, sealer, sanding, and catalyzed top coat, so the finish system builds up in layers that protect the maple surfaces in normal kitchen use. Adjustable shelves are standard, which supports on-site adjustments when plumbing or under-sink components need specific clearances. Concealed, self-closing hinges are used on the doors, so the hinges stay out of sight when the doors are closed while pulling the doors shut the final distance for a clean front alignment. Plywood drawers are standard, and the front to back epoxy-coated drawer system is securely attached to a solid wood strip in the back of the cabinet, providing a stable slide path that resists racking when drawers are loaded. Together, these elements give the installer a cabinet built for repeated daily operation in kitchen environments.

Where This ADA Sink Base Fits And How It Performs

Using This 33 Inch ADA Sink Base In Layouts

This Kitchen Kompact 33 inch wide DWhite sink base cabinet is described as ADA compliant, so its 32-1/2 inch height works with accessible countertop heights in new construction or remodel layouts. The WHITE HANDICAP 33 RANGE/BASE/SINK designation shows it is intended for positions such as sink or base runs where ADA requirements apply, helping planners match this cabinet to required accessible clearances. Maple flat panel doors with recessed plywood inserts keep the door profiles simple, which lets this unit blend into longer DWhite Kitchen Kompact cabinet runs around ranges and sinks. Solid wood hanging strips at the top and bottom provide strong mounting points, so installers can fasten the cabinet to wall framing while aligning it with adjacent units. Solid wood toe kicks at 3/4 inch thick carry finishes down to the floor line while creating a durable toe space at the front of the run.

Details That Help Maintain Alignment And Durability

The mortised and tenoned solid 3/4 inch maple door frames create mechanical joints that support door stability, so doors resist twisting and stay aligned with the cabinet face frame over time. Solid wood corner blocks that are glued and power nailed tie the cabinet corners together, helping the box stay square when countertops and sinks add downward load. The three-ply plywood flat panel with rotary cut hard maple veneer face provides a stable recessed center panel with a maple surface, which helps limit panel movement while maintaining a consistent appearance next to other maple-front units. The 4 step process of stain, sealer, sanding, and catalyzed top coat produces a layered finish, so the coated surfaces handle normal contact from handling and cleaning in a kitchen setting. Concealed, self-closing hinges hold to a consistent closing action, helping doors pull shut to the same position to keep front reveals even across the run. The plywood drawers with front to back epoxy-coated drawer system, securely attached to a solid wood strip in the back, give drawers a defined track that resists loosening at the back and helps drawers slide predictably under repeated use.

Common Questions About This DWhite Sink Base Cabinet

Select This Kitchen Kompact DWhite ADA Sink Base

The Kitchen Kompact DWH33RBS DWhite sink base combines ADA compliant height, a 33 inch width, and a 24 inch depth with maple flat panel doors, mortised and tenoned 3/4 inch maple frames, solid wood corner blocks, and solid wood hanging strips, giving installers a structurally supported cabinet for accessible sink runs. Adjustable shelves, concealed self-closing hinges, plywood drawers, and a front to back epoxy-coated drawer system attached to a solid wood strip in the back provide a working interior suited to daily kitchen use. For projects using Kitchen Kompact DWhite cabinets, this unit aligns dimensions, construction details, and finish so accessible sink positions integrate smoothly with surrounding base cabinets.