Kitchen Kompact 36 inch sink base defines this 36 inch wide, 32-1/2 inch high, 24 inch deep DWhite sink base as an ADA compliant cabinet designed for accessible kitchen layouts. The mortised and tenoned construction of solid 3/4 inch maple door frames creates a rigid front that helps doors stay aligned under daily opening and closing. Maple flat panel doors with a recessed panel profile present a consistent face frame look that matches other Kitchen Kompact pieces in the same line. A flat panel plywood insert made as a three-ply panel with a rotary cut hard maple veneer face provides a stable center panel that resists typical kitchen humidity changes. Solid wood toe kicks at 3/4 inch thick add strength at floor level, supporting the cabinet front where it takes contact from wheelchairs, carts, or mops in an ADA kitchen environment.
This Kitchen Kompact ADA sink base uses solid wood hanging strips located on the top and bottom so installers have defined structural bands for fastening into wall studs when lining up a 36 inch wide base run. The 32-1/2 inch overall height and 24 inch depth let the cabinet fit standard countertop depths while maintaining ADA compliant base height relationships. Solid wood toe kicks at 3/4 inch thick create a strong front lower edge that carries finish materials and protects the cabinet front where it meets flooring transitions. Adjustable shelves inside the cabinet allow height changes to work around trap arms and water supplies once the sink cutout and plumbing are laid out.
The Kitchen Kompact DWH36RBS cabinet serves as a 36 inch wide ADA compliant sink base, so it is suited to locations where an accessible sink is required along a countertop run. The 32-1/2 inch height works with ADA counter design, allowing the sink base opening and toe space to support seated use when combined with appropriate top and toe configurations. Solid wood hanging strips at the top and bottom of the cabinet give installers predictable mounting points when tying this unit between adjacent base cabinets and securing it to the wall plane. Because the doors use maple, flat panel construction, this unit visually coordinates with other Kitchen Kompact cabinets sharing the same finish and door style in an ADA kitchen layout.
Concealed, self-closing hinges on the maple flat panel doors allow fine tuning of door alignment after the cabinet is set, which helps maintain even reveals along a multi-cabinet run. The mortised and tenoned solid 3/4 inch maple door frames provide a robust anchor point for these hinges, supporting repeated adjustments as flooring or countertops are shimmed. The three-ply flat panel plywood insert with a rotary cut hard maple veneer face brings dimensional stability to the door center, reducing panel movement that could affect reveal gaps over time. Inside, adjustable shelves can be repositioned to clear traps, waste arms, and angle stops, so the plumber can route lines without cutting fixed shelving. Plywood drawers with a front to back epoxy-coated drawer system secured to a solid wood strip in the back of the cabinet create a stable slide path that keeps drawers tracking straight, even after repeated openings in a high-use ADA workspace.
The Kitchen Kompact DWH36RBS cabinet is 36 inches wide, 32-1/2 inches high, and 24 inches deep, fitting typical base cabinet footprints while supporting ADA height planning.
The mortised and tenoned solid 3/4 inch maple door frame creates strong joints that keep doors stable and better hold hinge screws during years of opening and closing.
The three-ply flat panel with a rotary cut hard maple veneer face provides a stable, consistent-looking center panel that handles normal kitchen humidity without excessive movement.
Solid wood hanging strips at the top and bottom give defined structural areas to fasten through, helping keep the cabinet tight to studs along an ADA sink run.
The plywood drawers with a front to back epoxy-coated drawer system, secured to a solid wood strip, keep drawers tracking smoothly under load from stored items.
The catalyzed top coat, applied after stain, sealer, and sanding, forms a protective finish that helps the maple and veneer surfaces resist routine cleaning and contact.
The Kitchen Kompact 36 inch sink base DWH36RBS combines ADA compliant dimensions with solid 3/4 inch maple door frames, three-ply maple veneer panels, and solid wood toe kicks, giving installers a structurally focused cabinet for accessible kitchen sink locations. Adjustable shelves, concealed self-closing hinges, solid wood hanging strips, and plywood drawers with an epoxy-coated system all work together to support straightforward installation and long-term daily use in accessibility-centered layouts.
Sold In: 1 Each