Kitchen Kompact Glenwood wall corner cabinet GW36WCT is a 36 inch wide, 36 inch high, 12 inch deep wall corner unit with a recessed panel design, so it fills an upper corner run while matching Glenwood fronts in layout-critical kitchens. The cabinet belongs to the Kitchen Kompact line, which keeps component details consistent across a project, helping installers line up faces and reveals from cabinet to cabinet. The solid construction approach described for this series supports daily kitchen use where doors and fronts see repeated opening and closing. As a wall corner piece, the size coordinates with standard 36 by 36 by 12 inch wall layouts, which matters when aligning adjacent wall cabinets and maintaining level runs along walls.
The Glenwood 36WCT wall corner cabinet uses solid wood hanging strips at both the top and bottom of the cabinet back, giving installers two strong fastening zones for tying the box securely into wall framing. These continuous strips simplify hitting studs across the cabinet width and help distribute the weight of stored items. The 36 inch width, 36 inch height, and 12 inch depth suit common wall cabinet runs, so the unit aligns with neighboring 12 inch deep cabinets and standard soffit heights. The rigid face frame built from 3/4 inch solid oak, maple, or beech supports consistent reveals along doors when set plumb and level with adjoining units.
The Kitchen Kompact 36 x 36 wall cabinet format positions this Glenwood wall corner at a size that matches many upper wall layouts, helping keep fronts flush where runs meet at a corner. The 12 inch deep dimension matches common wall cabinet depth, so the front plane lines up with adjacent units for a clean corner transition. Solid wood hanging strips at the top and bottom of the cabinet back provide reliable fixing points in these corner zones, where stud access can be tight but holding power is critical. The 3 ply end panels with a 1/2 inch engineered wood core and hardwood veneers create flat sides that butt smoothly to neighboring cabinets, supporting tight joint lines that are easier to scribe to walls.
In use, the solid 3/4 inch oak, maple or beech face frame gives a sturdy front structure for mounting doors and hardware in the Glenwood style, which supports consistent reveals across the corner area. Kiln-dried rails with mortise and tenon joinery, glued for added strength, hold the frame square as adjacent cabinets are clamped and fastened into a run, reducing the chance of twist that could affect door swing or alignment. Solid wood corner blocks that are glued and power nailed tie the cabinet box together as it is maneuvered into a corner, helping the shape stay true while installers work around ceiling and wall irregularities.
The kiln-dried rails joined with mortise and tenon and glued for added strength create a stable frame that responds predictably to fastening and adjustment, which matters when doors and hinges are set for even gaps. Solid wood hanging strips on wall and base cabinets, located at the top and bottom, give installers clear fastening targets and reduce splitting risk compared with narrow backing, making stud anchoring more straightforward. The 3 ply end panels with a 1/2 inch thick engineered wood core and hardwood veneers offer balanced construction that helps end panels stay flat as they are screwed through into neighboring cabinets, supporting tight seams with minimal shimming.
Across the Kitchen Kompact line, 3/4 inch thick solid wood toe kicks on base cabinets coordinate with this wall corner style, contributing to a consistent visual base-to-wall relationship in the kitchen layout. Solid wood corner blocks that are glued and power nailed allow the Glenwood 36WCT wall corner cabinet to handle normal handling and lifting during install without the box racking out of square, maintaining alignment so wall runs can be leveled efficiently.
The Kitchen Kompact Glenwood wall corner cabinet GW36WCT measures 36 inches wide, 36 inches high, and 12 inches deep, which fits many standard wall cabinet height and depth layouts in kitchen corners.
The cabinet frames are built of solid 3/4 inch oak, maple or beech, giving a robust face frame structure that supports hardware mounting and helps keep doors aligned during everyday kitchen use.
Each rail is kiln-dried, joined by mortise and tenon, and then glued for added strength, so the front frame resists warping in typical kitchen humidity and holds its shape while cabinets are fastened together.
Solid wood hanging strips on wall cabinets are located at the top and bottom, offering continuous solid wood areas for fastening to studs and spreading load along the cabinet back.
End panels use 3 ply construction with a 1/2 inch engineered wood core and hardwood veneers, giving a stable side surface that stays flat when joined to neighboring cabinets.
Solid wood corner blocks are glued and power nailed, bracing the cabinet box so it resists racking when lifted, positioned in a corner, and fastened into place.
The Kitchen Kompact Glenwood 36WCT wall corner cabinet combines a 36 by 36 by 12 inch format with a solid wood 3/4 inch frame, kiln-dried mortise and tenon rails, and 3 ply end panels, so it supports straightforward, repeatable installation in upper kitchen corners. Solid wood hanging strips at the top and bottom of the wall cabinet back supply strong fastening areas for anchoring to studs, helping installers build out continuous wall runs. For projects built around the Kitchen Kompact Glenwood style, this wall corner cabinet carries the same construction approach across the corner, keeping structure and appearance consistent from piece to piece.
Sold In: 1 Each