Kitchen Kompact Glenwood wall corner cabinet 24x36x12 identifies this as a 24 inch wide, 36 inch high, 12 inch deep wall corner unit, so installers can plan runs, soffits, and clearances around a known footprint. The Kitchen Kompact Glenwood 24WCT wall cabinet name ties it directly to the Glenwood door style, which helps match this corner to the rest of a Glenwood layout on a job. The product description states that this is a wall cabinet, so it mounts on the wall rather than the floor, which affects layout with base cabinets and appliances. The recessed panel Glenwood design reference signals a coordinated appearance with other Glenwood recessed panel pieces, which matters when aligning doors and sightlines across a kitchen run.
Solid wood hanging strips on wall and base cabinets, located at the top and bottom, create two defined zones where fasteners can bite into solid wood, which helps installers anchor the Glenwood wall corner cabinet securely to studs. Because the cabinet is 36 inches high, those top and bottom hanging strips spread weight over a taller section of wall, which is useful when the unit is loaded with dishes. The 12 inch depth works with standard upper cabinet lines to keep the front faces in a straight plane, simplifying alignment and trim. Solid wood corner blocks that are glued and power nailed stiffen the box, so it stays square while installers shim and level the cabinet during mounting.
The Kitchen Kompact GW24WCT cabinet is described as a 24 inch wide wall corner, so it is meant to occupy the upper corner position in a run of Glenwood wall cabinets. The 36 inch height aligns with common wall cabinet heights, allowing it to sit level with adjacent 36 inch Glenwood uppers along the wall. The 12 inch depth keeps the face of this corner even with standard-depth uppers, which matters when doors and crown details need to line up around the room. Because all frames are built of solid 3/4 inch oak, maple or beech, this corner cabinet front integrates visually and structurally with other Kitchen Kompact pieces built the same way in the same line.
Solid wood hanging strips on wall and base cabinets, located at the top and bottom, give installers predictable fastening zones, which helps repeat the same mounting approach from job to job. Each rail being kiln-dried, joined by mortise and tenon, and then glued for added strength keeps the face frame stable, so hinge alignment on the Glenwood recessed panel doors stays consistent after installation. Solid wood corner blocks that are glued and power nailed lock the cabinet geometry, which helps doors track correctly and keeps face frames aligned with adjacent units. End panels built with 3-ply construction around a 1/2 inch thick engineered wood core and hardwood veneers balance stability with a hardwood surface, reducing side movement while maintaining a finished cabinet appearance.
The Kitchen Kompact Glenwood wall corner cabinet is 24 inches wide, 36 inches high, and 12 inches deep, which helps plan wall layout, hood spacing, and alignment with adjoining upper cabinets.
The frame is built of solid 3/4 inch oak, maple or beech with kiln-dried rails joined by mortise and tenon and glued, supporting a rigid, square opening for door and hinge alignment.
The solid wood hanging strips at the top and bottom of the wall cabinet provide defined fastening areas, allowing the load to transfer into studs along two strong mounting rails.
The solid wood corner blocks are glued and power nailed, tying the cabinet corners together so the box stays rigid during lifting, shimming, and everyday use.
The end panels use 3-ply construction with a 1/2 inch thick engineered wood core and hardwood veneers, giving a stable side panel with a hardwood surface for exposed ends.
The 3/4 inch thick solid wood toe kicks apply to matching base cabinets in the same line, keeping the lower run structurally consistent with the Glenwood wall units.
The Kitchen Kompact Glenwood wall corner cabinet 24x36x12 combines a solid wood 3/4 inch frame, kiln-dried mortise and tenon rails, solid wood corner blocks, and solid wood hanging strips to support a stable wall installation. End panels with 3-ply, 1/2 inch engineered wood core and hardwood veneers add dimensional stability with a hardwood surface. For projects built around the Kitchen Kompact Glenwood style, this GW24WCT wall corner cabinet provides the corner piece that carries the same construction methods across the upper run.
Sold In: 1 Each