Kitchen Kompact Glenwood base peninsula cabinet 36 inch wide by 34-1/2 inch high by 24 inch deep establishes a standard footprint for peninsula layouts, so installers can line up this GW36B-P unit with adjacent runs in a typical base cabinet row. The recessed panel Glenwood design ties this base peninsula cabinet into matching Kitchen Kompact Glenwood fronts, which keeps front elevations consistent when this unit turns a run out into the room. The cabinet is identified as GLENWOOD 36BP and GW36B-P, which helps shops and installers match it with plan callouts and order the correct piece for peninsula positions. Being part of the Kitchen Kompact product class means this base peninsula integrates with other Kitchen Kompact cabinets in the same line, simplifying layout planning across a kitchen job.
The 36 inch width, 34-1/2 inch height and 24 inch depth of this Glenwood base peninsula cabinet define its footprint, allowing installers to plan base runs and peninsula overhangs with known dimensions. Solid wood hanging strips located at the top and bottom of the base cabinet give defined fastening zones for securing the cabinet to structural elements and neighboring cabinets during installation. Solid wood corner blocks that are glued and power nailed tie the frame to the case, so the cabinet maintains its shape when positioned and leveled in a peninsula configuration. The 3/4 inch thick solid wood toe kicks provide a substantial lower face for contact with flooring transitions and visual alignment along the base run.
The Kitchen Kompact 36 inch Glenwood base peninsula cabinet is sized at 34-1/2 inches high and 24 inches deep, which aligns with standard base cabinet and countertop dimensions, making it suitable as the turning element where a run extends into the room. As a GW36B-P Glenwood 36BP unit within the Kitchen Kompact category, this cabinet works in layouts that use Glenwood recessed panel fronts across the kitchen, keeping a consistent look at both wall and base positions. The solid 3/4 inch hardwood frame of oak, maple or beech supports doors and drawer fronts where traffic is heavy around a peninsula, so the cabinet front structure matches the demands of a working kitchen edge. End panels built with a 1/2 inch, 3-ply engineered wood core and hardwood veneers allow exposed peninsula ends to show a hardwood surface, giving designers a presentable side while the engineered core contributes to panel stability along the length of the cabinet.
Frame rails that are kiln-dried before assembly help this Kitchen Kompact base peninsula cabinet hold alignment once installed, which matters when door gaps and reveals must stay consistent along a peninsula line. Mortise and tenon rail joints that are glued for added strength create a rigid frame, supporting hardware mounting and reducing frame movement that could affect door swing over time. Solid wood corner blocks that are glued and power nailed tie the corners of the cabinet box and frame together, so the cabinet resists racking as it is set, leveled and fastened into a peninsula leg. Solid wood hanging strips on the base cabinet, located at the top and bottom, establish clear fastening bands for screws into studs or adjoining cabinets, simplifying repeatable attachment points across multiple Kitchen Kompact units. The 3/4 inch thick solid wood toe kicks give a substantial lower member for alignment against flooring, helping installers carry a straight visual line across the base and around the peninsula turn. The 1/2 inch thick, 3-ply engineered wood core with hardwood veneers in the end panels combines a stable core with a hardwood face, supporting a smooth finished side along the length of the peninsula where it is visible from the room.
The Kitchen Kompact Glenwood 36BP base peninsula cabinet measures 36 inches wide, 34-1/2 inches high and 24 inches deep, so it matches typical base cabinet and countertop depth for peninsula use.
The frame of this Glenwood base peninsula cabinet is built from solid 3/4 inch oak, maple or beech, providing a hardwood structure for doors and fronts in a working kitchen.
The frame rails are joined with mortise and tenon joints that are then glued, producing a strong, tight connection that supports long-term frame stability.
This base peninsula cabinet uses solid wood corner blocks that are glued and power nailed, tying corners together so the cabinet resists racking while being set and fastened.
Solid wood hanging strips on this base cabinet are located at the top and bottom, creating defined fastening zones when attaching to studs or adjoining cabinets.
End panels on the Glenwood base peninsula cabinet use 3-ply construction with a 1/2 inch engineered wood core and hardwood veneers, giving a hardwood surface over a stable core.
The Kitchen Kompact Glenwood 36BP base peninsula cabinet combines a 36 inch wide, 34-1/2 inch high, 24 inch deep footprint with a solid 3/4 inch hardwood frame, letting installers match standard kitchen dimensions while using a rail and corner layout designed for structural strength. With 3/4 inch solid wood toe kicks, solid wood hanging strips located at the top and bottom of the base cabinet and 3-ply, 1/2 inch thick engineered wood core end panels with hardwood veneers, this GW36B-P unit is structured for use where a cabinet run turns out into the room. For projects built around Kitchen Kompact Glenwood recessed panel styling, this base peninsula cabinet provides the designated GLENWOOD 36BP component that ties peninsula layout and appearance back to the rest of the line.
Sold In: 1 Each