Kitchen Kompact Glenwood base peninsula cabinet is a 48 inch wide, 34-1/2 inch high, 24 inch deep base peninsula unit that provides a defined work zone and storage run in a kitchen layout. The cabinet is part of the Kitchen Kompact Glenwood line, so it maintains a consistent look when used with other cabinets from the same series. The recessed panel design sets a clear visual style that installers can match across adjacent runs. The base height of 34-1/2 inches positions the countertop at a standard working level once a typical top is installed. The 24 inch depth aligns the peninsula with standard base cabinet depth, helping maintain a straight run when tying into nearby cabinets. The 48 inch width gives a generous peninsula span that can transition between work area and open floor without requiring additional narrow filler cabinets.
The 48 inch width of this Glenwood base peninsula cabinet sets a clear footprint to plan the peninsula projection into the room. The 34-1/2 inch height gives installers a predictable starting point when lining up the peninsula with other base cabinets before countertop installation. The 24 inch depth matches standard base cabinet depth, allowing the peninsula to tie into straight runs without irregular jogs. Solid wood hanging strips at the top and bottom of wall and base cabinets create defined fastening zones for pull-out resistance. Solid wood toe kicks at 3/4 inch thickness support the front edge where installers commonly shim and level, helping maintain alignment over time. Solid wood corner blocks reinforce the box, so the cabinet resists twisting while being set, shimmed, and fastened into its peninsula position.
The Kitchen Kompact Glenwood base peninsula cabinet, identified as GW48B-P and GLENWOOD 48BP, is sized for use as a peninsula anchor in kitchen layouts. Its 48 inch width allows it to act as a transition piece between an existing base run and an open area, creating a defined edge for worktops or seating zones. The 24 inch depth keeps the peninsula aligned with standard base cabinet depth so the countertop line continues straight from adjacent Kitchen Kompact base cabinets. The recessed panel style helps the peninsula match other Glenwood cabinets visually, which is useful when a continuous appearance across base and wall cabinets is required. Solid wood end panels with 3-ply construction and hardwood veneers provide a presentable side surface when one or both ends of the peninsula remain exposed to view.
All frames on this Glenwood base peninsula cabinet are built of solid 3/4 inch oak, maple, or beech, giving the face frame enough rigidity to hold door reveals and hardware alignment through normal kitchen use. Each rail is kiln-dried, joined by mortise and tenon, and then glued, so the main joints in the frame resist loosening that could otherwise affect door swing or face frame squareness. Solid wood corner blocks that are glued and power nailed tie the cabinet sides, front, and back together, which helps the box stay square while being set into a peninsula configuration and secured to adjoining cabinetry. Solid wood hanging strips on wall and base cabinets at both the top and bottom provide consistent fastening points for installers, supporting accurate positioning and pull resistance where the peninsula meets walls or other cabinets. End panels with 3-ply construction, using a 1/2 inch engineered wood core and hardwood veneers, create a stable surface that is less prone to warping, which helps maintain smooth side lines along the visible peninsula ends.
The Kitchen Kompact Glenwood base peninsula cabinet measures 48 inches wide, 34-1/2 inches high, and 24 inches deep, which matches standard base cabinet depth and a typical working height once the countertop is installed.
The cabinet frame is built of solid 3/4 inch oak, maple, or beech, providing a rigid structure that supports countertop loads and helps keep doors aligned during everyday kitchen use.
Each rail is kiln-dried, joined by mortise and tenon, and then glued, forming tight joints that resist separation and help maintain face frame squareness over the life of the installation.
The end panels have 3-ply construction with a 1/2 inch engineered wood core and hardwood veneers, giving flat, stable sides suitable for exposed peninsula ends in a kitchen layout.
Solid wood hanging strips on wall and base cabinets, located at the top and bottom, create defined fastening zones that support secure attachment to walls or adjoining cabinets.
The 3/4 inch thick solid wood toe kicks provide a sturdy front base area that supports shimming, leveling, and foot traffic contact along the bottom of the peninsula run.
The Kitchen Kompact Glenwood 48 inch base peninsula cabinet combines a solid 3/4 inch wood frame, mortise and tenon rail joints, and 3-ply end panels into a box ready for a peninsula role in a kitchen run. The 48 inch width, 34-1/2 inch height, and 24 inch depth align this unit with standard base layouts while defining a clear peninsula footprint. Solid wood toe kicks, hanging strips, and corner blocks support a stable installation where the cabinet must both carry countertop loads and tie into adjacent structures. For projects using the Glenwood line, this GW48B-P base peninsula cabinet provides a coordinated way to extend the run into the room.
Sold In: 1 Each