Kitchen Kompact Glenwood base cabinet 33 inch wide x 32-1/2 inch high x 24 inch deep creates a base run sized for Glenwood layouts while keeping a consistent footprint with standard kitchen depths. The ADA compliant design supports handicap-oriented base runs where toe space and height matter for access. The cabinet follows the Glenwood line with a recessed panel style, so the face presents a coordinated look with other Glenwood pieces on the same project. The 33 inch width gives room for a functional base section while still fitting common kitchen and work-area spans. A 32-1/2 inch overall height positions the counter lower than many standard bases, aligning cabinet height to ADA-oriented installations where reach and clearance are critical. The 24 inch depth matches typical countertop depth, which helps keep front edges and work surfaces in line across adjoining base cabinets.
The Glenwood handicap 33 base cabinet uses a 33 inch width, giving installers a clear rough planning dimension for wall-to-wall or cabinet-to-cabinet layouts. Its 24 inch depth lines up with standard countertop depths, which simplifies scribing and front-edge alignment along a run. The 32-1/2 inch height helps set finished counter height on ADA projects, so the top plane of adjacent bases can be leveled to a consistent working surface. The 3 inch side stiles provide defined vertical members for fastening to neighboring cabinets, allowing through-screwing into solid material at the stile locations. Pre-drilled rail holes for the reversible single door offer predictable hinge positions, so door reveals can be matched from unit to unit. The 8-3/4 inch high x 6 inch deep toe kick dimension gives a known footprint at the floor, useful when setting shims and planning front-to-back clearances.
The Glenwood handicap 33 base, identified by manufacturer part GWH33B, is sized for base runs where a 33 inch cabinet is specified under a continuous counter. Its 32-1/2 inch height ties directly to ADA compliant layouts, allowing the base to support counters in handicap-focused kitchens or workspaces that need a reduced working height. The recessed panel Glenwood style lets this base align visually with other Kitchen Kompact Glenwood cabinets, so a run can keep the same panel detail at each door and drawer front. The 24 inch depth anchors the cabinet in standard-depth installations, which helps when lining it up with appliances and adjacent cabinets designed around a typical countertop projection. The 8-3/4 inch high x 6 inch deep toe kick gives room at the bottom front of the cabinet for wheel or foot space, supporting approach in handicap-oriented layouts while retaining a measurable face for base trim.
The reversible single door base unit layout lets installers decide on right-hand or left-hand door swing on site, using the rails with pre-drilled holes to hang the door according to room conditions. This flexibility can reduce rework when obstacles, corners, or appliances dictate a specific swing direction. The 3 inch side stiles give generous solid wood areas at both sides of the opening, which is useful for both hinge mounting and for fastening the unit to its neighbors so the run stays rigid under countertop load. Because the toe kick is defined at 8-3/4 inch high x 6 inch deep, installers can plan consistent toe clearances across multiple Glenwood handicap 33 base units, keeping the line even along the floor and under the front edge of the counter. The combination of 33 inch width, 32-1/2 inch height, and 24 inch depth provides fixed reference points, making it easier to repeat the same cut lists, shim heights, and layout marks from job to job. Together these details let the Kitchen Kompact Glenwood base cabinet ADA compliant unit function as a predictable component in handicap-focused cabinet runs.
The Kitchen Kompact Glenwood base cabinet ADA compliant unit measures 33 inches wide x 32-1/2 inches high x 24 inches deep, which sets the footprint and counter height relationship in a base run.
The Glenwood 33 base is a single door base unit that is reversible, so the door hangs right or left using holes pre-drilled in the rails, supporting jobsite swing selection.
The Glenwood handicap 33 base is described as ADA compliant and uses a 32-1/2 inch height and an 8-3/4 inch high x 6 inch deep toe kick, which supports handicap-oriented base cabinet layouts.
The 3 inch side stiles on this Kitchen Kompact Glenwood base cabinet provide solid vertical members for hinge mounting and for fastening to adjacent cabinets.
The 8-3/4 inch high x 6 inch deep toe kick sets a clear lower-front profile, which helps plan floor clearances and toe space across handicap-focused base runs.
The GWH33B is a Kitchen Kompact Glenwood base cabinet with a recessed panel style, so it coordinates with other Glenwood cabinets in the same project.
The Kitchen Kompact GWH33B Glenwood handicap 33 base cabinet combines a 33 inch width, 32-1/2 inch height, and 24 inch depth with ADA compliant intent, a recessed panel Glenwood style, and reversible single door function using pre-drilled rail holes. These verified dimensions and details support installers planning handicap-focused base runs that require consistent counter height, standard depth alignment, and flexible door swing. For Glenwood projects that call for an ADA oriented 33 inch base cabinet with defined 3 inch side stiles and a measured 8-3/4 inch high x 6 inch deep toe kick, this unit provides a repeatable, spec-driven component.
Sold In: 1 Each