Kitchen Kompact Glenwood base cabinet is a 42 inch wide, 32-1/2 inch high, 24 inch deep base cabinet designed as a Glenwood handicap 42 base, so it supports ADA-compliant layouts where base height and footprint coordination matter. The cabinet is described as ADA compliant, which ties directly to its Glenwood handicap designation, helping you plan accessible kitchen runs with a matching base unit. A recessed panel door style defines the Glenwood look, giving you a consistent panel profile wherever this base is installed. The cabinet belongs to the Kitchen Kompact cabinet line, so it aligns with other Kitchen Kompact Glenwood components in both sizing language and style. With its 42 inch width, the cabinet provides a broad base section, which is useful when building longer accessible work surfaces that still rely on standard base depths.
This Glenwood handicap 42 base cabinet measures 42 inches wide, so it occupies a substantial run segment that can anchor a stretch of accessible counter. The 32-1/2 inch height figure defines the base from floor to top of cabinet, supporting calculations for ADA counter heights when combined with chosen top thickness. The 24 inch depth aligns with typical base cabinet depth, giving you a straightforward fit to standard countertop depths and appliance lines. The specified toe kick height of 8-3/4 inches and depth of 6 inches provides a firm dimension for front clearances and trim details along the bottom of the run. Because the unit is part of the Kitchen Kompact Glenwood series, its stated dimensions integrate cleanly within that system.
The GLENWOOD HANDICAP 42 BASE designation establishes this cabinet as a 42 inch wide anchor piece within an ADA-focused Glenwood layout, making it well suited for accessible work zones where wider base sections are preferred. Its 32-1/2 inch height interacts directly with ADA counter height planning when a suitable top is applied, so it is practical in barrier-reduced kitchen projects. A 24 inch depth allows it to sit flush with standard bases and countertops, helping you avoid staggered fronts in mixed runs. The recessed panel Glenwood styling means the front matches other Glenwood units, preserving a consistent face design across accessible and standard segments. Because it is classified within the Kitchen Kompact cabinet category, it is intended to be used alongside other Kitchen Kompact Glenwood components in the same project.
The web description explains that single door base units are reversible by hanging the door right or left using holes pre-drilled in the rails, which simplifies layout changes on site when swing direction needs to match appliances or walls. The note about 3 inch side stiles on the related Glenwood bases gives a consistent frame dimension to reference when spacing adjacent cabinets, improving the accuracy of filler sizing and centerline measurements. The 8-3/4 inch high by 6 inch deep toe kick specification lets you calculate exact toe space geometry, which matters when you are aligning flooring transitions, base molding, and ADA toe clearance along the run. Identifying this model by manufacturer part number GWH42B provides a concrete reference when repeating an installation or matching an existing Glenwood handicap 42 base in later phases.
The GWH42B base cabinet is 42 inches wide, 32-1/2 inches high, and 24 inches deep, which sets its footprint and working height for planning runs and countertops.
The Glenwood handicap 42 base designation and 32-1/2 inch cabinet height support ADA-oriented layouts, helping establish accessible counter runs when paired with an appropriate top.
Related single door base units are reversible because the door can be hung right or left using holes pre-drilled in the rails, which streamlines field adjustments to door swing.
The toe kick is 8-3/4 inches high and 6 inches deep, giving defined toe space and projection for aligning flooring, toe molding, and ADA toe clearance along the cabinet front.
The 3 inch side stiles on the related bases create a predictable frame width, which assists with planning fillers, clearances, and alignment between adjacent Glenwood cabinets.
The GWH42B Glenwood handicap 42 base belongs to the Kitchen Kompact Glenwood cabinet line, so it coordinates with other Kitchen Kompact Glenwood units in style and sizing language.
The Kitchen Kompact Glenwood base cabinet with Glenwood handicap 42 base designation offers a 42 inch wide, 32-1/2 inch high, 24 inch deep footprint that fits ADA-focused kitchen layouts. The 8-3/4 inch by 6 inch toe kick dimension and recessed panel Glenwood styling provide predictable geometry and visual continuity across your Kitchen Kompact Glenwood run. With its defined size, ADA-related description, and manufacturer part number GWH42B, this base cabinet is ready to slot into projects that require a wide Glenwood ADA-oriented base position.
Sold In: 1 Each