Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact Glenwood base cabinet describes a 12 inch wide, 32-1/2 inch high, 24 inch deep base unit that sets a clear footprint for planning runs, aligning adjacent cabinets, and laying out countertops on kitchen or workroom projects. The cabinet is identified as Glenwood Base Cabinet ADA Compliant, so its 32-1/2 inch overall height supports layouts that target accessible working heights when combined with appropriate tops and flooring. The recessed panel styling called out in the name gives the door a defined frame-and-panel look that coordinates visually with other Glenwood pieces on the same wall. The product name specifies 12 inch width, which is useful for filling narrow gaps and building precise modular sequences between wider cabinets or appliances.
The Glenwood Base Cabinet ADA Compliant height of 32-1/2 inches gives a defined case height that ties directly to counter layout, allowing consistent working height when this unit is part of an accessible run. The 4 inch high x 3 inch deep toe kick dimension defines the recess at the bottom front of the cabinet, which helps when aligning adjacent bases to the same toe depth and when cutting any decorative toe skins or flooring transitions. Pre-drilled holes in the rails for hanging the reversible single door provide fixed hinge locations, which support repeatable door alignment from cabinet to cabinet and reduce layout measuring during installation.
The GLENWOOD UNIVERSAL DESIGN 12 BASE designation points to a 12 inch wide footprint that works well in tight spots, such as between major appliances or at the end of a run where only a narrow opening is available. At 24 inches deep, this base lines up with standard-depth countertop projections, helping create a straight front line when combined with other 24 inch deep Glenwood bases. The 32-1/2 inch height connects with plans that call for ADA compliant Glenwood base cabinets, allowing runs that keep base cabinet height coordinated when an accessible work surface is desired. The specified 4 inch high x 3 inch deep toe kick lets installers coordinate kicks across the room, so floor coverings and any toe trim pieces follow the same recess profile.
The web description states that single door base units are reversible and that the door is hung using holes pre-drilled in the rails, so the hinge side can be chosen on site without drilling hinge locations. This reversible single door base cabinet reversible setup makes it easier to respond to layout changes, such as swapping appliances or shifting a run by a few inches, while keeping the door swing oriented for comfortable access. Because the hinge holes are pre-drilled in the rails, hinge spacing is predetermined, which supports consistent reveals and speeds up hanging doors across multiple Glenwood base cabinets. The 3 inch side stiles create robust face frame borders around the door opening, giving the hinges a defined mounting zone that stays visually aligned from one cabinet to the next in the Glenwood line.
The GWUD12B Glenwood base cabinet is listed as 12 inches wide, 32-1/2 inches high, and 24 inches deep, which sets its footprint and elevation when planning cabinet runs and countertop layouts.
The single door base units are reversible, using holes pre-drilled in the rails, so the door can be hung on the right or left to match the planned swing and workflow at that location.
The GLENWOOD UNIVERSAL DESIGN 12 BASE description identifies a 12 inch wide Glenwood base cabinet within the universal design line, helping match it to coordinated Glenwood layouts and accessible height planning.
The toe kick is 4 inches high and 3 inches deep, defining the recess at the cabinet bottom so toe space, floor finishes, and any toe trim can align evenly across a row of bases.
The 3 inch side stiles create consistent face frame borders on each side of the door opening, which helps adjacent Glenwood cabinets line up visually and keeps door reveals uniform in a run.
The Glenwood Base Cabinet ADA Compliant height of 32-1/2 inches supports accessible counter height planning when this base is used as part of an ADA-oriented Glenwood cabinet run.
The Kitchen Kompact 12 inch Glenwood Base Cabinet ADA Compliant, identified as GLENWOOD UNIVERSAL DESIGN 12 BASE and GWUD12B, offers a defined 12 inch x 24 inch x 32-1/2 inch case with 4 inch high x 3 inch deep toe kick and reversible single door rails. These specifics let installers slot this cabinet into Glenwood universal design layouts where narrow width, known height, and flexible door swing are important. For projects using Kitchen Kompact Glenwood components from Wurth Baer Supply, this base helps complete accessible runs while keeping dimensions and styling coordinated.
Sold In: 1 Each