Kitchen Kompact Glenwood Base Cabinet For ADA Use

Kitchen Kompact Glenwood base cabinet in the GWUD18B configuration provides an 18 inch wide, 32-1/2 inch high, 24 inch deep base unit that builds a consistent footprint in kitchen runs, so layout, spacing, and countertop planning stay predictable from the start. The cabinet is described as ADA compliant, which supports projects where an accessible base height and clearances drive the design, helping align cabinetry with ADA-focused kitchen plans. A recessed panel style on this Glenwood base establishes a defined rail-and-stile appearance, which gives installers and designers a consistent door profile to match across the rest of a Kitchen Kompact run. The unit is identified as a universal design 18 base, tying this specific 18 inch size into the broader Glenwood universal design line, so it fits into standardized layouts built around that series.

Glenwood Base Details That Support Daily Use

• The cabinet uses 3 inch side stiles on the single door base, which creates a stable frame around the opening and helps maintain alignment for the door over repeated use in a busy kitchen.
• The single door base unit is reversible, allowing the door to be hung either right or left using holes pre-drilled in the rails, so hinge-side choice adapts to wall constraints and workflow without field modification.
• Functioning drawers are part of this unit, adding organized storage within the base footprint and giving installers a factory-configured combination of door and drawer access in one cabinet.
• The toe kick is 4 inches high by 3 inches deep, establishing a defined recess at the floor that affects how the cabinet meets finished flooring and provides space for users feet when working at the counter.
• The product is sold by Wurth Baer Supply as an Each unit, which aligns ordering directly to the number of base cabinets required in the project layout without additional conversion.

Installation Dimensions And Framing Considerations

This Kitchen Kompact 18 inch wide base cabinet measures 32-1/2 inches high and 24 inches deep, giving installers fixed case dimensions for planning rough openings, appliance gaps, and countertop overhang in a continuous run. The 3 inch side stiles on the single door define the frame proportions at the front, which influences hinge positioning, door swing clearance, and how adjacent fronts line up for a consistent reveal. A 4 inch high by 3 inch deep toe kick integrates into the cabinet, so toe space, flooring transitions, and any applied base trim can be planned around a known recess depth and height without guesswork. The universal design 18 base identification ties these installation details to the Glenwood line, supporting layout decisions that rely on matching cabinet style and proportions.

Using The Glenwood Universal Design 18 Base Cabinet

Where This 18 Inch Glenwood Base Fits Best

The GLENWOOD UNIVERSAL DESIGN 18 BASE designation identifies this cabinet as an 18 inch wide base within the Glenwood series, which suits narrow runs, filler-critical stretches, or spaces beside appliances where a full-width cabinet is not feasible. Its 32-1/2 inch height and 24 inch depth align this base with standard counter installations, enabling it to sit alongside other Kitchen Kompact units in a straight run or corner configuration without needing custom casework for alignment. The reversible single door design, using holes pre-drilled in the rails, allows installers to decide hinge side on-site, so the cabinet fits either left-hand or right-hand swing conditions next to walls or other cabinets. Functioning drawers add storage above or beside the door area within the same footprint, making this 18 inch base useful where both door access and drawer organization are needed but space is limited. The recessed panel Glenwood styling ties the base into the Kitchen Kompact Glenwood look, supporting cohesive fronts across multiple cabinet sizes.

Details That Support Repeatable Layouts And Results

The 3 inch side stiles on the single door front give a consistent frame width that helps installers line up adjacent doors and drawer fronts, which reduces visual step between units and supports reliable hinge placement from job to job. Because the door can be hung right or left using pre-drilled rail holes, hinge boring and mounting points remain consistent, which simplifies repetition on multi-unit installs and minimizes layout rework. The 4 inch high by 3 inch deep toe kick provides a fixed reference for shimming, leveling, and scribing to finished floors, so installers can establish a straight toe line under multiple bases using the same recess dimension. Being sold as an Each unit through Wurth Baer Supply means project counts translate directly into order quantities, helping keep cabinet scheduling, delivery planning, and staging aligned with the number of openings framed for this Glenwood universal design 18 base. Together, these defined dimensions and reversible features support predictable installation routines across accessible and standard kitchen projects.

Common Questions About The GWUD18B Glenwood Base

Select The Right Glenwood Base For Your Run

The Kitchen Kompact Glenwood universal design 18 base cabinet, identified as GWUD18B, brings an 18 inch wide, 32-1/2 inch high, 24 inch deep footprint into accessible and standard kitchen layouts. With a reversible single door using rail-mounted, pre-drilled holes and functioning drawers built into the unit, this base adapts to hinge orientation and storage needs within tight spaces. The 3 inch side stiles and 4 inch high by 3 inch deep toe kick provide fixed framing and floor references that support consistent alignment across a run of Glenwood cabinets. Wurth Baer Supply offers this cabinet as an Each unit, so cabinet counts translate directly into orders when planning Glenwood installations.