Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Kitchen Kompact wall cabinet in the WW30Z model gives a 30 inch wide, 24 inch high, 12 inch deep wall unit, so installers can drop it into a standard upper layout without reworking surrounding cabinet runs. The Warmwood door style uses a flat recessed panel, which keeps the face clean and straightforward for kitchens where a simple, recessed look is preferred. Door frames use mortised and tenoned construction in solid 3/4 inch maple, tying the corners together mechanically so joints stay tight under daily door use. Solid wood corner blocks are glued and power nailed, which adds stiffness to the box when the cabinet is fastened to studs in a run. A maple flat panel door with a rotary cut hard maple veneer face presents a consistent grain look that matches other Warmwood pieces. Solid wood hanging strips at the top and bottom create solid grab points during mounting.
The 30 inch width and 24 inch height let this wall cabinet land cleanly above common base sizes, so installers can maintain consistent reveals along the run. Solid wood hanging strips at both the top and bottom edges give two continuous mounting bands, which helps pull the cabinet evenly against the wall instead of relying on isolated points. Solid wood corner blocks that are glued and power nailed keep the case from twisting while the unit is clamped or lifted, helping doors stay aligned after mounting. Mortised and tenoned 3/4 inch maple door frames hold hinge screws in solid stock, supporting repeated opening and closing. The Warmwood flat panel door uses a maple veneer face, so when the cabinet is installed alongside other Warmwood units, the fronts keep a uniform maple appearance.
This Kitchen Kompact WW30Z cabinet is sized at 30 inches wide, 24 inches high, and 12 inches deep, so it fits typical wall positions such as over counters or in runs where a 30 inch span is planned. The Warmwood recessed panel door design, built with maple flat panel doors and a flat panel plywood insert, provides a consistent, understated profile that pairs with other Warmwood cabinets in the same project. The rotary cut hard maple veneer face on the three-ply center panel keeps the visible center field in line with the solid 3/4 inch maple door frame, supporting a unified maple look across the run. Solid wood hanging strips at both the top and bottom edges of the case define straight mounting lines, which helps when leveling multiple WW30Z units next to each other.
Door frames built with mortised and tenoned 3/4 inch maple joinery keep the frame corners locked, which helps doors remain square relative to the cabinet opening after fastening to the wall. Solid wood corner blocks, glued and power nailed into position, brace the case during handling so the cabinet resists racking when lifted, pushed into a corner, or pulled against shims. Adjustable shelves let installers set interior spacing to line up with the homeowner's storage needs, which can reduce callbacks for interior changes. Concealed, self-closing hinges hold the doors on the maple frames while closing them gently to the face frame, keeping hardware hidden from the front and helping doors return to the closed position on their own. The 4 step finish process of stain, sealer, sanding, and catalyzed top coat treats exposed wood surfaces, giving the Warmwood appearance a finished look that is ready to align with counters, trim, and other Kitchen Kompact units.
The Kitchen Kompact WW30Z wall cabinet measures 30 inches wide, 24 inches high, and 12 inches deep, so it matches standard upper cabinet sizing in many kitchen layouts.
The door frames use mortised and tenoned solid 3/4 inch maple with a flat panel plywood insert, giving a solid frame around a stable recessed panel for everyday door use.
The WW30Z cabinet uses solid wood hanging strips at the top and bottom, creating continuous mounting zones for pulling the cabinet tight and level along wall studs.
The wall cabinet uses concealed, self-closing hinges, which keep hinge hardware hidden from the front and bring the doors back to the closed position smoothly.
The WW30Z Warmwood cabinet is built with adjustable shelves, allowing interior spacing to be set to fit different dish or pantry layouts after installation.
The Warmwood finish uses a 4 step process of stain, sealer, sanding, and catalyzed top coat, giving the maple surfaces controlled color and a protective top layer.
The Kitchen Kompact wall cabinet in the WW30Z Warmwood style combines 30 inch by 24 inch by 12 inch sizing with mortised and tenoned solid 3/4 inch maple door frames, so it drops cleanly into typical upper layouts. Solid wood corner blocks, solid wood hanging strips, and a three-ply flat panel with rotary cut hard maple veneer give the case and door structure needed for everyday use. Concealed, self-closing hinges and adjustable shelves support functional kitchen storage. Use this Warmwood cabinet when you need a recessed panel maple wall unit that aligns with other Kitchen Kompact components on the job.
Sold In: 1 Each