Kitchen Kompact Warmwood wall cabinet gives you a 36 inch wide, 42 inch high, 12 inch deep wall unit that fits upper cabinet runs where extra height and standard wall depth are needed, so layouts align with tall appliances and trim. The cabinet uses maple flat panel doors, which present a straightforward recessed panel face that suits many kitchen and shop styles while staying easy to keep visually consistent across a run. Door frames are mortised and tenoned construction of solid 3/4 inch maple, creating a jointed frame that resists racking forces when doors are operated repeatedly. Flat panel plywood insert is a three-ply panel with a rotary cut hard maple veneer face, so the door panel stays relatively stable while presenting a maple grain face ready for Warmwood finishing. Maple flat panel doors tie the frame and insert together into a single working surface, which helps doors track predictably over years of normal cabinet use.
Solid wood hanging strips located on the top and bottom give you clear structural rails to fasten through when mounting the 36 inch wide cabinet, so wall fasteners bear on solid lumber instead of thinner panel stock. Solid wood corner blocks are glued and power nailed at the cabinet corners, adding extra triangulation where side, top, and bottom meet to help the case hold square while it is lifted, positioned, and fastened. Door frames are mortised and tenoned construction of solid 3/4 inch maple, which keeps the hinge side of each door stable as hinges cycle during normal use on a wall. Concealed, self-closing hinges keep hardware out of sight when the doors are closed while pulling doors shut at the end of their swing, which helps doors return to a consistent resting position along the face of the run.
The Kitchen Kompact 36 inch wide x 42 inch high x 12 inch deep Warmwood wall cabinet works in upper kitchen runs where added height is needed above counters, giving more vertical storage within the same wall footprint. Solid wood hanging strips located on the top and bottom allow mounting along both the upper and lower back, so the cabinet can be tied into wall framing across more than one line for stability in longer runs. Maple flat panel doors with a recessed panel style present a clean front that fits many kitchen layouts, letting this unit sit between other Warmwood wall cabinets without visual interruption. Door frames are mortised and tenoned construction of solid 3/4 inch maple, so hinge-side strength supports repeated opening at common work zones such as cooking and prep areas.
The Warmwood WW36Z wall cabinet uses solid wood corner blocks that are glued and power nailed at the joints, which helps the box maintain square corners so face edges align with adjacent cabinets during installation. Solid wood hanging strips located on the top and bottom define straight mounting lines, making it easier to pull the cabinet tight to the wall while keeping the case aligned to a level reference. Flat panel plywood insert is a three-ply panel with a rotary cut hard maple veneer face, so the door panel surface remains relatively uniform, helping reveals stay even along the edge when doors close. Concealed, self-closing hinges keep the mechanism inside the cabinet envelope while drawing doors closed to the same spot, which supports consistent gaps between this Kitchen Kompact maple wall cabinet and neighboring units. The 42 inch height and 12 inch depth of the Kitchen Kompact 36x42x12 cabinet set its proportions so installers can plan crown, light rails, and hood clearances using a known upper cabinet size across the layout.
The Kitchen Kompact 36x42x12 cabinet measures 36 inches wide, 42 inches high, and 12 inches deep, so it matches standard wall cabinet depth while adding extra height for more vertical storage.
The Warmwood WW36Z wall cabinet uses door frames that are mortised and tenoned construction of solid 3/4 inch maple with a flat panel plywood insert, creating a stable recessed panel door for repeated daily use.
The Kitchen Kompact Warmwood wall cabinet uses adjustable shelves, so shelf positions can be set to suit different item heights and make better use of the 42 inch cabinet interior.
The Warmwood WW36Z cabinet uses concealed, self-closing hinges, keeping hardware hidden when the doors are shut and drawing doors back to a consistent closed position along the face.
The Kitchen Kompact maple wall cabinet uses solid wood corner blocks that are glued and power nailed, together with solid wood hanging strips located on the top and bottom, to reinforce the case for typical wall mounting loads.
The Warmwood wall cabinet uses a 4 step process of stain, sealer, sanding and catalyzed top coat, giving the maple veneer and solid maple components a finished surface suited to normal kitchen environments.
The Kitchen Kompact Warmwood wall cabinet combines a 36 inch width, 42 inch height, and 12 inch depth with maple flat panel doors, so it serves as a workhorse upper unit in full-height wall layouts. Door frames are mortised and tenoned construction of solid 3/4 inch maple, and flat panel plywood insert is a three-ply panel with a rotary cut hard maple veneer face, giving the door assembly a unified maple appearance that lines up well across multiple cabinets. Solid wood hanging strips located on the top and bottom, plus solid wood corner blocks that are glued and power nailed, provide structural cabinet features that support straightforward wall installation for professional and serious DIY projects.
Sold In: 1 Each