N/D GAGE 100 PSI bottom mount is a C.A. Technologies air line gauge built for filter/regulator/lubricator setups where clear pressure reading is needed up to 100 PSI. The gauge is identified by manufacturer part number 52-58, so matching it to existing documentation in a shop or finishing line is straightforward during replacement or expansion. A bottom mount connection lets this gauge sit upright when threaded into vertical air line components, supporting quick visual checks along a bank of filters, regulators, and lubricators. The 1/4 inch connection size aligns with common ports on air line components in woodworking and finishing environments, so installers can tie it into typical filter/regulator/lubricator bodies without adapting to a different thread size. With a 100 PSI range, this gauge serves standard compressed air circuits used around woodworking tools and spray equipment, helping keep pressure within the working window of air-driven systems.
This gauge is part of the air line components category focused on filters, regulators, and lubricators, so it is suited to mounting on those assemblies where pressure feedback is required. The bottom mount configuration aligns with ports on many filter/regulator/lubricator bodies, allowing the gauge to project upward for direct viewing on a control panel or at the front of a spray booth. With a 1/4 inch connection, installers can tie the gauge into standard ports on air line components without changing the basic layout of the manifold or station. The 100 PSI measuring range is appropriate for many compressed air lines feeding woodworking and finishing tools, so one gauge type can be used across several regulators and branches without introducing different scales.
This C.A. Technologies 52-58 bottom mount gauge sits naturally on filter/regulator/lubricator assemblies that condition air for tools and spray equipment. By belonging to the Filter/Regulator/Lubricator product class, the gauge is oriented toward locations where both filtration and pressure control matter, such as finishing rooms or machine clusters. The air line components category positioning means it is intended as part of the main compressed air infrastructure rather than stand-alone tooling, so it fits along header drops, wall-mounted regulator sets, or panel-mounted control groups. Installed with the bottom mount connection threaded into a vertical port, the gauge face presents toward the user, supporting quick pressure checks at each station along the line without altering the base equipment layout.
The 100 PSI range of this N/D GAGE 100 PSI bottom mount keeps readings focused on pressures commonly used in shop air systems, helping operators read meaningful graduations around typical setpoints instead of working on the edge of an oversized scale. The 1/4 inch connection aligns with many regulator and filter bodies in air line component families, which simplifies specification when building out new drops or mirroring an existing control panel on the opposite side of a shop. Matching the C.A. Technologies brand across gauges and other air line pieces supports consistent part numbering, especially when multiple 52-58 gauges are spread across spray booths or process islands. Because the gauge is identified specifically as N/D GAGE 100 PSI (BOTTOM MOUNT)-1/4, maintenance teams can call out exactly this configuration on prints or work orders, reducing time spent sorting through multiple gauge variants during replacement or expansion.
The N/D GAGE 100 PSI bottom mount is rated to display pressures up to 100 PSI, keeping readings aligned with typical compressed air levels in filter/regulator/lubricator systems.
The 52-58 bottom mount gauge connects from the underside, so when threaded into an upward-facing port, the dial can be viewed easily from the front of the air line assembly.
This C.A. Technologies air gauge uses a 1/4 inch connection, matching common ports on air line components such as filters, regulators, and lubricators in shop air systems.
This filter regulator lubricator gauge is positioned for use on air line components serving woodworking and finishing tools, providing pressure feedback on conditioned air lines.
Manufacturer part number 52-58 identifies this specific N/D GAGE 100 PSI bottom mount configuration, helping maintenance and purchasing teams repeat the same gauge choice across stations.
The bottom mount design lets the gauge stand upright when installed in a vertical port, so operators walking the line can read air pressure quickly at each regulator or filter group.
The N/D GAGE 100 PSI bottom mount from C.A. Technologies provides a 100 PSI reading range and a 1/4 inch bottom connection suited to filter/regulator/lubricator assemblies in compressed air systems. The 52-58 part number clearly identifies this configuration, supporting straightforward repeat orders across multiple stations. For new air line projects or standardizing existing manifolds, this air line gauge aligns with common air line components used around woodworking and finishing operations, helping keep pressure monitoring consistent wherever conditioned air is delivered.