KM-06403 water dispenser tray identifies this unit as the Killarney Metals KM-06403 drain pan, so you are working with a defined part number when specifying or reordering. The tray is described as a water dispenser tray, so it is intended to catch and control water in use. The same part is also called a water heater drain pan, 24in w/hole, rubber, linking it directly to water heater or similar equipment applications. The tray is black, which helps it visually recede under equipment and keeps installs looking consistent in darker service areas. A listed 2-1/2" height gives the sidewall depth needed to hold water before it can reach surrounding surfaces. That height helps create a visible containment edge, which supports cleaner service zones around heaters or dispensers. Being categorized as a drain pan clarifies that this part is about fluid management rather than structural support.
The product is identified as a water dispenser tray, Black, which lets you plan it where dark trim or equipment hides the pan edge. The description as a water heater drain pan, 24in w/hole, rubber, points to use under heaters or other stationary equipment of roughly that width. The stated 2-1/2" height describes the wall depth you have available when setting the tray under a unit or framing around it. That defined height helps you visualize how much vertical space the pan occupies in tight mechanical or utility rooms. The mention of a hole in the 24in w/hole, rubber description provides a clear location to route water toward a drain line, simplifying layout around existing plumbing paths.
The KM-06403 water dispenser tray name ties directly to Killarney Metals KM-06403, anchoring it in shop records as a specific drain pan. It is described as a water dispenser tray, so it is suited to sit beneath water dispensers where splashes or minor leaks need containment. The notation water heater drain pan, 24in w/hole, rubber, further connects it to water heater duty at a 24in width, which aligns with many residential or light commercial heater footprints. Being in the drain pans product class and under the drip and drain pans category positions this tray as part of a fluid management setup rather than decorative trim. The black finish helps it visually disappear under tanks or dispensers, supporting cleaner lines in mechanical rooms and service spaces without drawing attention to the containment hardware.
The 2-1/2" height on the water dispenser tray provides a defined rim that holds water before it reaches flooring or adjacent structures, which helps protect nearby materials in normal seep or drip conditions. The 24in w/hole, rubber description indicates that the pan has a hole to direct collected water toward a drain route, turning standing water into a managed flow path. That integrated hole simplifies planning alignment to an existing floor drain or routed line because the discharge point is already part of the pan. Being specified as a water heater drain pan links the KM-06403 to applications where ongoing protection under a stationary heater or similar appliance is needed, supporting repeatable layouts across projects using the same model. The use of a black tray lets installers keep visible surfaces more uniform, especially where other components such as stands or frames are also dark.
The KM-06403 unit is a Killarney Metals water dispenser tray categorized as a drain pan, so it is intended to capture and manage water under equipment.
The KM-06403 water heater drain pan is described as 24in wide, which helps match it to equipment bases sized around that dimension.
The 2-1/2 inch height gives the tray enough wall depth to hold collected water before it can reach nearby surfaces around the installation.
The KM-06403 tray is described as black so it visually blends under water heaters or dispensers, helping service areas look more uniform.
The 24in w/hole, rubber description indicates a hole that allows routed water to exit the pan toward a drain path.
This KM-06403 unit is listed under drip and drain pans within shop and safety supplies, emphasizing its role in fluid containment work.
The KM-06403 water dispenser tray from Killarney Metals gives you a defined 24in w/hole, rubber drain pan for water-related equipment layouts. The 2-1/2" height and black finish support practical, unobtrusive containment under heaters or dispensers. For projects where controlled drainage and a known part number matter, spec the KM-06403 through Wurth Baer Supply so future replacements or matching installs stay consistent across your jobs.
Sold In: 1 Each