Dishwasher leak pan gives you a defined catch area under a dishwasher, so any water reaching the floor is directed into a controlled basin instead of spreading across the subfloor. This unit is sized at 24 inches wide by 20-1/2 inches long by 1 inch high, so it fits common dishwasher footprints where that footprint matches these dimensions. The 1 inch height creates a low-profile lip that still holds leaked water, which helps protect finished floors and nearby cabinetry from direct moisture contact. Construction in galvanized steel provides a rigid base that resists sagging under the appliance weight, supporting stable installation in a cabinet opening. Galvanized steel also offers a protective zinc coating over the steel, which helps the pan handle incidental moisture in normal dishwasher environments over time. The pan functions as a simple, passive catch basin that supports straightforward planning for containing dishwasher drips or leaks in a shop-fit or remodel workflow.
The 24 inch width of this dishwasher drip pan lines up with many full-size dishwasher cabinet openings that share that width, so it fits into typical 24 inch-wide bays when those bays match the stated dimension. The 20-1/2 inch length allows the pan to sit within the depth of the opening while leaving room behind or in front for connections, which can simplify routing of the supply line and drain hose in the remaining space. With a 1 inch height, the pan occupies minimal vertical clearance in the appliance cavity, which helps maintain working room for leveling feet adjustments under the dishwasher base. Galvanized steel construction creates a firm, flat surface for the appliance to rest on, supporting stable shimming and leveling without the pan deforming under point loads from the feet.
This Killarney Metals dishwasher leak pan is identified for use under dishwashers, so it fits projects where a defined drip area under the appliance is part of the layout. The 24 inch width lines up with many dishwasher cabinet openings that share that nominal width, which suits standard kitchen runs built around that module size. Its 20-1/2 inch length allows use in cavities where the depth accommodates both the pan and the appliance chassis, supporting installations in built-in kitchen cabinetry and similar casework. At 1 inch high, the pan profile sits low in the opening, so it integrates into spaces where the vertical clearance under the tub is limited. Galvanized steel construction suits interior shop and residential environments where the pan may encounter intermittent moisture from dishwasher operation. Within these conditions, the pan serves as a passive collection surface, helping direct leaked water into one defined zone beneath the unit.
The combination of 24 inch width and 20-1/2 inch length gives installers fixed reference dimensions for planning cutouts, which helps coordinate cabinet manufacturing with field installation of the dishwasher. The 1 inch height establishes a clear boundary for leak collection while keeping the profile shallow, which can reduce the adjustments needed to keep the dishwasher front aligned with surrounding drawer fronts and doors. Galvanized steel creates a rigid platform that resists bending when the appliance weight is concentrated on its feet, helping maintain accurate level across the front and sides. That rigidity supports repeatable leveling and anchoring steps from one job to the next when the same KM-06614 pan is specified. The defined dimensions and material also simplify communication between designers, shop staff, and installers, because they can reference the Killarney Metals KM-06614 dishwasher leak pan as a known component in drawings and job notes.
The Killarney Metals KM-06614 dishwasher leak pan measures 24 inches wide, 20-1/2 inches long, and 1 inch high, which defines the footprint and lip height available under the dishwasher.
The 1 inch height creates a shallow curb that can collect water while keeping the profile low, helping maintain space for leveling feet adjustments under the dishwasher base.
The 24 inch by 20-1/2 inch dishwasher leak pan is made from galvanized steel, giving a rigid, zinc-coated steel surface that supports the appliance and handles incidental moisture.
This dishwasher drip pan is identified for use under dishwashers, so it suits built-in dishwasher installations in cabinetry where a defined under-unit leak collection area is planned.
The KM-06614 dishwasher pan provides fixed 24 by 20-1/2 by 1 inch dimensions and galvanized steel construction, which simplifies specifying the same under-unit solution across multiple projects.
Galvanized steel gives the pan a firm, non-flexing base, so the dishwasher feet bear on a stable surface, supporting accurate leveling and front alignment with adjacent cabinetry.
The Killarney Metals KM-06614 dishwasher leak pan offers a 24 inch by 20-1/2 inch by 1 inch galvanized steel basin dedicated to under-dishwasher leak collection. Those fixed dimensions and rigid material support planning cabinet openings, placing utilities, and leveling the appliance on a stable surface. For shops and installers working through repeated kitchen layouts, specifying this dishwasher leak pan through Wurth Baer Supply provides a consistent, documented component that fits directly into drawings and job standards.