Washer drain pan describes this Killarney Metals KM-08659 unit, a galvanized steel drip pan sized for wash machine areas where controlling water is important. The 30 inch width, 34 inch length, and 1 inch height create a defined catch zone under or around laundry equipment, keeping spills confined to a predictable footprint. The galvanized steel construction provides a rigid, sheet-metal surface that stands up to typical shop and laundry environments better than light plastic trays. This washer trench pan format fits into layouts where a shallow, low-profile pan is preferred, supporting projects that need containment without a tall lip that interferes with adjacent flooring or equipment bases. With its rectangular 30 by 34 inch plan, the pan is suited to installations where the installer wants a consistent metal surface under the washer location to organize water control.
This 30 inch wide by 34 inch long by 1 inch high washer drain pan gives installers a known metal footprint to design around. The rectangular shape supports positioning beneath the washer area so that the appliance sits over a single, continuous galvanized steel surface. The shallow 1 inch height lets the pan sit close to finished floors without creating a tall step at the edge, which is useful in laundry rooms or shop wash stations where people move equipment or carts nearby. Using the KM-08659 dimensions during layout helps align floor penetrations, nearby casework, or adjacent machinery so that the drain pan sits where water is most likely to collect.
The Killarney Metals KM-08659 washer drain pan is built as a rectangular, galvanized steel pan for washer locations that match its 30 inch width and 34 inch length footprint. In laundry rooms, utility spaces, or shop areas with wash equipment, this pan can be positioned so the washer stands within the boundary of the 1 inch high sides, helping direct incidental water into a controlled area. The trench-style layout aligns with installations where a metal catch surface is preferred below equipment, and the defined dimensions make it easier to coordinate the pan position with nearby walls, floor drains, or platforms. By basing layouts on the 30 by 34 plan, planners can design a washer zone that keeps water on the galvanized surface instead of on surrounding floor finishes.
The 30 inch width, 34 inch length, and 1 inch height of the KM-08659 washer drain pan provide consistent geometry that supports repeatable placements from job to job. Installers can work from the same rectangular outline when centering washers, aligning pedestals, or coordinating with casework, which helps reduce layout adjustments in the field. The galvanized steel construction creates a stable, non-flexing base under the washer area, supporting predictable leveling and alignment over the pan surface. Because the pan dimensions are fixed by the KM-08659 part number, specifiers can call out this exact washer drain pan in project documentation, helping procurement and field crews reference the same 30 by 34 by 1 inch metal pan and maintain uniform results across similar installations.
The KM-08659 washer drain pan measures 30 inches wide, 34 inches long, and 1 inch high, giving a low-profile metal catch area sized for washer locations using that footprint.
This Killarney Metals washer drain pan is made from galvanized steel, providing a rigid metal surface suited to typical shop and laundry environments where a sturdy drip pan is needed.
The 1 inch height creates a shallow wall that contains water while keeping a low edge profile, which helps traffic and equipment movement around the washer area.
The 30 x 34 inch size gives installers a predictable footprint to design around, supporting consistent washer positioning relative to nearby walls, cabinets, or floor drains.
This washer drain pan serves as a galvanized steel catch surface under the washer area, helping contain spills or runoff to a defined 30 by 34 inch zone.
Referencing KM-08659 calls out this exact 30 x 34 x 1 inch galvanized washer drain pan, helping specifiers and installers align on the same pan across multiple jobs.
The Killarney Metals KM-08659 washer drain pan from Wurth Baer Supply offers a defined 30 inch by 34 inch by 1 inch galvanized steel footprint for washer areas. When a project calls for a shallow metal drip pan in that size range, this washer drain pan provides consistent geometry tied to a specific part number. Add this KM-08659 washer drain pan to project plans where a rigid, low-profile galvanized surface is needed under wash equipment to keep water in a controlled area.