Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Washer drain pan stainless steel construction defines this 30 inch wide x 32 inch long x 2-1/2 inch high Killarney Metals KM-01381 pan, giving washers a dedicated catch basin that helps keep surrounding floor surfaces separated from routine water runoff or minor spills. The 30 inch width pairs with the 32 inch length to create a broad footprint under the machine, so the pan spans the washer base area and gives water a defined area to collect before reaching other shop or laundry room surfaces. The 2-1/2 inch height sets a fixed sidewall depth around the perimeter, allowing the pan to hold a measurable volume of liquid beneath the washer and giving installers a clear boundary when planning floor slopes or drain locations. As a washer drip pan in stainless steel, this product sits directly in the wet zone under equipment, so the material choice supports repeated exposure to moisture in typical laundry or utility environments without the pan acting like a disposable component in the space.
The 30 inch width of this Killarney Metals KM-01381 washer drip pan gives installers a fixed side-to-side dimension to work from, so positioning the pan on the floor becomes a matter of aligning that width under the washer base before the machine is set in place. The 32 inch length provides slightly more coverage front-to-back than the width, which allows the pan to extend beneath door swing or control panel overhang on many washers, supporting practical placement in front of walls or near cabinetry. With a 2-1/2 inch height, this stainless steel pan raises the washer by that same amount, so installers can account for the added elevation relative to surrounding flooring, bases, or adjacent appliances when planning transitions and clearances.
This 30W x 32L x 2-1/2H Killarney Metals washer drain pan functions as a defined catch basin under a washing machine in laundry rooms, utility areas, and shop spaces where water exposure occurs near woodworking or storage zones. The stainless steel washer drip pan design supports use directly beneath washers placed near cabinets, workbenches, or storage racks, because the fixed metal walls contain routine water runoff up to the 2-1/2 inch side height instead of allowing it to spread immediately across finished or unfinished floors. The 30 inch width and 32 inch length give the pan a rectangular footprint that can be aligned parallel to walls, making it suitable for washers installed in alcoves, between casework, or alongside other equipment where predictable dimensions help avoid interference with surrounding structures. As part of a shop and safety supply setup, this stainless steel drain pan serves as a passive safeguard under the washer, collecting water in one location so any further handling of that water can be planned around the known pan area.
The defined 30 inch width on the KM-01381 washer drain pan gives designers and installers a consistent lateral measurement to reference on drawings, so centering or offsetting the washer within a room becomes a straightforward task tied to that known pan size. The 32 inch length provides a slightly deeper footprint, which helps when positioning the washer so front access, doors, or controls are reachable while the machine still sits fully over the stainless steel pan. The 2-1/2 inch height affects both containment and equipment elevation, so installers can plan baseboard details, toe spaces, or adjacent cabinet heights with that increase accounted for from the start. Because the pan is identified as a washer drain pan in stainless steel under manufacturer part number KM-01381, facilities using multiple washers can reference this specific model in maintenance logs or layout standards, helping keep replacements consistent and reducing rework when future changes are made in the same laundry or shop area.
The washer drain pan measures 30 inches wide by 32 inches long by 2-1/2 inches high, so it provides a defined footprint and containment depth under the washing machine.
The Killarney Metals KM-01381 washer drain pan is stainless steel, which provides a rigid surface under the washer in areas where moisture is present during normal operation.
The 2-1/2 inch height raises the washer by that amount and creates a containment wall, so installers can plan floor and cabinet relationships based on the elevated appliance position.
This stainless steel washer drip pan is used under washing machines in laundry rooms, utility areas, and shop spaces where controlled water containment under the unit is needed.
The KM-01381 part number identifies this specific Killarney Metals stainless steel washer drain pan, helping buyers match documentation, layouts, or previous orders.
The 30 by 32 inch footprint gives a predictable rectangle under the washer, simplifying alignment with walls, cabinets, and nearby equipment during planning and installation.
This 30 inch wide x 32 inch long x 2-1/2 inch high Killarney Metals KM-01381 stainless steel washer drain pan from Wurth Baer Supply provides a defined footprint and fixed containment height under a washing machine, supporting straightforward layout in laundry, utility, and shop areas where controlled water collection beneath equipment is part of the design. Selecting this washer drain pan stainless steel model ties your project to a known size, material, and manufacturer part number, simplifying repeat work, documentation, and future replacements in similar installations.