washer drip pan in a 25 inch wide by 27 inch long by 2-1/2 inch high format gives a defined catch area under a washing machine, so stray water stays confined to the tray footprint instead of reaching surrounding flooring. This compact washer drip pan size suits tight laundry spots where footprint is limited but a defined containment zone is still needed to manage leaks or splashes. The galvanized steel construction provides a rigid form that holds its shape under the weight of a properly supported appliance, which helps keep the tray positioned as planned. With the 2-1/2 inch height, the floor tray offers vertical capacity for holding runoff while keeping overall profile low for typical laundry room clearances. The Killarney Metals KM-04993 part number identifies this exact geometry and material, which helps facilities, builders, and property managers match the same pan style across multiple installs or future replacements.
The 25 inch width and 27 inch length on this Killarney Metals KM-04993 washer floor tray give installers clear outer dimensions to design around, so framing, shelving, or adjacent cabinetry can be set while preserving tray space. With a 2-1/2 inch overall height, the compact washer drip pan sits low enough for typical laundry room transitions yet still reserves sidewall depth to hold collected water in the metal basin. The galvanized steel washer pan construction supports a flat, stable base condition when positioned on a suitable floor, which helps maintain even support under the washer footprint. Identifying the unit as a floor tray in the description clarifies that it is intended to sit directly on the floor surface, guiding layout work for utility rooms, closets, or shop wash areas that integrate drainage planning around a defined catch area.
The SAP description listing this item as a washer floor tray at 27 by 25 inches in galvanized steel points to laundry and utility settings where protecting finished floors or structural substrates from washer runoff is part of the build scope. Its 25 inch width allows the galvanized steel washer pan to serve in narrow laundry closets, multifamily units, or small shop corners where a full-size basin may not align with available space. The 27 inch length helps this compact washing machine pan sit beneath typical residential washer depths while still focusing the containment zone where hoses and connections often sit. With 2-1/2 inches of height, the tray forms a shallow metal basin that contains water within the perimeter until it can be addressed, supporting risk reduction goals in occupied spaces or wood-framed structures. The galvanized steel material aligns with shop and safety supply needs by giving a durable-feeling surface suitable for back-of-house or service areas that rely on metal shop supplies.
The Killarney Metals KM-04993 designation on this compact washer drip pan gives planners and maintenance teams a repeatable spec for future projects, so identical 25 inch by 27 inch by 2-1/2 inch trays can be sourced when standardizing details across units. Knowing the exact floor tray dimensions simplifies coordination between trades, because cabinetry, trim, and nearby fixtures can be sized and positioned with confidence around the washer zone. The defined 2-1/2 inch tray height informs elevation decisions at doorways or transitions, helping designers avoid conflict between the metal basin edge and adjacent finishes. Because this washer drip tray is described specifically as galvanized steel, specifiers can align it with other galvanized elements in a project, supporting consistent material choices throughout utility spaces. As part of Wurth Baer Supply shop and safety supplies, the washer floor tray fits into procurement workflows that already rely on the same distributor for cabinetry-related components and shop gear, which can streamline ordering for repeated layouts.
The washer drip pan measures 25 inches wide by 27 inches long by 2-1/2 inches high, so planning for floor space and vertical clearance can follow those exact outer dimensions.
The Killarney Metals KM-04993 washer floor tray is made from galvanized steel, giving a metal catch surface suited to laundry and utility environments using metal shop supplies.
The 2-1/2 inch height sets the basin sidewall depth, which helps installers align thresholds, bases, and nearby finishes around the tray edge in the washer area.
The compact washer drip pan suits laundry rooms, utility closets, or small shop spaces where a defined metal catch area under a washing machine is needed within a limited footprint.
The 25 by 27 inch washer floor tray size provides a predictable rectangular footprint, simplifying cabinet, wall, and service layouts around the washer zone.
The washer floor tray appears in Wurth Baer Supply shop and safety supplies, aligning it with products used to protect work areas and occupied spaces from equipment-related spills.
The 25 inch by 27 inch by 2-1/2 inch galvanized steel washer drip pan from Killarney Metals offers a clearly defined footprint and basin depth for managing water around laundry equipment. The KM-04993 identifier ties this compact washer drip pan to a specific size and material, which helps designers, builders, and maintenance teams repeat the same detail across multiple locations. Sourcing it through Wurth Baer Supply connects the washer floor tray to an established lineup of shop and safety supplies, supporting projects that already rely on the same distributor. For jobs that call for a compact metal floor tray under a washing machine, this washer drip pan provides a clear, repeatable choice.