Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Compact washer drip pan describes this Killarney Metals KM-06897 pan that measures 25 inches wide, 29 inches long, and 1 inch high, so it creates a defined catch area directly under or around compact laundry equipment. The low 1 inch height forms a shallow boundary that helps keep minor leaks and splashes in one place, which supports cleaner shop or laundry spaces. The compact 25 by 29 inch footprint suits tighter locations where floor space is at a premium while still providing a functional drip zone. As a drip pan in the Drip Pans product class, it is intended to sit under equipment and collect liquids, simplifying clean-up routines. The rectangular layout lines up well with compact washer bases, helping installers position the unit consistently each time on similar projects.
This galvanized steel washer drip pan is designed as a floor-sitting component, so its 25 inch width and 29 inch length give installers predictable dimensions to work with when laying out compact laundry equipment. The low 1 inch height allows the washer to sit close to the original floor level, which can help maintain door swing clearances and hose routing similar to a bare-floor setup. As part of a drip pan category, it functions as a passive catch basin, so positioning it square and level under the washer base supports even load distribution. The rigid galvanized steel construction helps resist flexing under typical washer weight, giving a firm platform that supports stable operation during spin cycles.
The KM-06897 compact washer trench pan, described as 25 inches wide by 29 inches long by 1 inch high, is well suited to laundry or utility areas where equipment is smaller and space is constrained. The defined rectangle gives planners a consistent footprint for compact washer placement in residential-style laundry rooms, multi-unit facilities, or shop wash zones. Because it belongs to the Drip Pans product class within shop and safety supplies, it is appropriate anywhere minor water or fluid runoff from compact washers needs to be routed onto a controlled surface instead of directly on the floor. The low 1 inch profile also helps when equipment must be slid into alcoves or tight corners without adding significant elevation.
The specified 25 inch width and 29 inch length give tradespeople fixed reference points for planning drain locations, hose lengths, and adjacent casework around compact washers. Knowing the pan is 1 inch high allows consistent calculation of final machine height relative to counters or nearby work surfaces, which supports repeatable designs across several installations. The galvanized steel construction offers a stable base that helps washers sit evenly, which in turn supports smoother operation and can reduce vibration against surrounding building elements. By working with the clearly identified KM-06897 part number, shops can standardize this exact pan for recurring projects, which streamlines ordering, layout drawings, and on-site installation steps.
The KM-06897 pan is specified as 25 inches wide, 29 inches long, and 1 inch high, which defines the available catch area and the low profile under compact washers.
This compact washer drip pan is made from galvanized steel, providing a rigid, metal catch surface suited to shop and laundry environments with regular equipment use.
The 1 inch height raises the washer slightly above floor level while still keeping a low step, helping maintain door clearances and familiar hose routing positions.
This pan is in the Drip Pans product class and is typically used under compact washers in laundry, utility, or shop areas to catch minor leaks and drips.
The KM-06897 part number identifies a consistent 25 by 29 by 1 inch galvanized steel pan, helping standardize layouts and reorders across multiple installations.
The 25 by 29 inch footprint gives designers a fixed rectangle for compact washer placement, simplifying coordination with nearby cabinets, drains, and wall clearances.
The Killarney Metals KM-06897 compact washer drip pan offers a 25 inch by 29 inch footprint with a 1 inch height in galvanized steel, giving installers a clearly defined, low-profile catch zone for compact washers. These fixed dimensions simplify layout drawings, repeatable room designs, and on-site positioning around drains and adjacent casework. For projects requiring a metal drip solution under compact laundry equipment, this galvanized steel washer pan from Wurth Baer Supply provides a specific, part-numbered option that aligns with shop and safety supply needs.