30"W x 32"L x 2-1/2"H Front-Load Washer Floor Tray with Drain, Stainless Steel, KM-01535

Stainless Washer Drain Pan For Floor Protection

Washer drain pan describes this Killarney Metals KM-01535 pan, built as a floor tray to catch water around a washing machine footprint. The 30 inch width supports typical washer widths, so the unit sits under the appliance and defines a controlled catch area. The 32 inch length adds extra coverage at the front or back of the machine, helping contain splashes or minor hose drips before they spread across the shop or laundry floor. A 2-1/2 inch height creates a low wall around the perimeter, giving the pan usable depth to hold liquid while still allowing the washer to be accessed and serviced without awkward step-up. The stainless steel construction stated in the description resists moisture exposure from everyday washer use, supporting long-term service in laundry, utility, or shop spaces. As a drip pan in the Wurth Baer Supply lineup, it fits into general shop and safety workflows where water control and floor protection are important.

Key Washer Pan Details For Daily Use

• The 30 inch width defines the side-to-side footprint, so the pan sits under most washing machines while leaving a small edge for catching stray water, which helps reduce cleanup around the appliance base.
• The 32 inch length extends the catch area beyond front and rear edges of the washer, providing additional coverage where hoses connect or doors open, which helps direct leaks into the pan instead of onto finished floors.
• The 2-1/2 inch height gives the pan enough depth to hold collected water from drips and minor leaks, buying time to address the source before moisture migrates into adjacent building materials and causes secondary work.
• The stainless steel material noted in the description withstands repeated contact with water and typical laundry moisture, supporting a durable catch surface that keeps its form in active utility rooms, workshops, or similar environments.
• The KM-01535 manufacturer part number ties this washer floor tray to Killarney Metals documentation, which simplifies reordering the same size pan when standardizing installations across multiple laundry or shop locations.

Washer Floor Tray Fit And Drain Setup

This washer floor tray with drain is described as a washer floor try with drain, 32 inch, stainless steel, indicating it is designed to sit flat on a floor under the appliance while providing a drain point. The 30 inch width and 32 inch length set the available footprint for the washer feet, so installers can position the machine squarely inside the pan and align it with nearby walls, counters, or mechanical connections. The 2-1/2 inch height keeps the washer base slightly elevated relative to the surrounding floor, which can help define a clear transition between wet and dry areas. The built-in drain reference allows the pan to be tied into an appropriate floor or line drain point, guiding collected water away from critical finishes. As part of Wurth Baer Supply shop and safety supplies, this layout supports organized, repeatable laundry room and utility room setups.

Using This Stainless Drain Pan In Real Spaces

Where This Washer Drain Pan Fits Best

This stainless steel washer drain pan fits applications where a washing machine operates above finished or sensitive floors, based on its classification under drip and drain pans and its washer-focused description. The 30 inch width and 32 inch length size the pan for a standard residential or light commercial washer footprint, so it can be used in laundry rooms, utility rooms, or shop spaces where water control is needed. The 2-1/2 inch height forms a modest basin that remains accessible around the appliance, so technicians still have room to reach valves or connections at the back or sides. Because the pan is made from stainless steel as stated, it suits environments where repeated contact with water, detergent runoff, or general moisture is expected, such as multi-unit housing laundry rooms or workshop clean-up areas.

Details That Support Consistent Washer Installations

The KM-01535 washer drain pan designation gives installers a specific, repeatable part to specify when laying out laundry spaces, which helps keep dimensions consistent from one project to the next. The 30 inch width provides a clear target when framing or planning adjacent casework, since the washer and pan assembly will occupy a known lateral space on the floor. The 32 inch length lets planners account for extra clearance at the rear for hoses, while still capturing any moisture within the stainless basin. The 2-1/2 inch height creates a defined edge around the washer footprint, supporting visual checks for water presence around the base. The stainless steel construction from Killarney Metals means the pan is suited to long-term service within Wurth Baer Supply customers workflows, helping maintain predictable drainage and drip control in laundry or utility installations that see regular use.

Washer Drain Pan Details Installers Ask About

Selecting This Stainless Washer Pan For Projects

This Killarney Metals KM-01535 stainless steel washer drain pan from Wurth Baer Supply pairs a 30 inch width, 32 inch length, and 2-1/2 inch height to support controlled water capture under a washing machine. The washer floor tray with drain layout helps direct drips and minor leaks toward a drain point, supporting planned laundry room and utility room designs. When a project calls for a defined washer footprint and stainless drip control in a shop or building, this washer drain pan offers a documented size and material profile ready to integrate into the layout.