Rev-A-Shelf Edge 6-1/2" x 16-1/4" Earring Holder Case, Manganese, 5E512-20-1

Choose a Rev-A-Shelf earring holder case

Rev-A-Shelf earring holder case is an optional closet organizer accessory made to sit on top of an Edge tray that is sold separately. This Edge earring holder case is part of the Rev-A-Shelf Edge line and gives buyers a dedicated way to organize earrings within a modular closet system accessory layout. The aluminum earring holder case has a manganese finish and measures 6-1/2 inches wide, 16-1/4 inches deep, and 1-11/16 inches high. For buyers planning a jewelry tray top case, these verified dimensions help confirm fit before ordering. Each package includes one manganese earring holder case only, so the matching tray base must be purchased separately if not already installed.

Use this closet jewelry organizer case

• Rev-A-Shelf brand construction - Supports buyers who want an accessory from the same brand family as their Edge closet system components.
• Edge earring holder case format - Gives earrings a dedicated storage area instead of mixing them with other jewelry or small personal items.
• Designed to sit on top of an Edge tray - Helps buyers build a layered jewelry tray top case setup within an existing Edge tray layout.
• Aluminum material - Provides a metal case body for buyers who prefer aluminum over fabric or plastic organizer inserts.
• Manganese color - Helps match this modular closet system accessory to other dark-toned closet components or tray accessories.
• 6-1/2 inch width - Helps buyers check available tray surface area and plan compartment spacing before purchase.
• 16-1/4 inch depth - Helps confirm front-to-back fit on the intended Edge tray and within the closet drawer area.
• 1-11/16 inch height - Helps buyers review vertical clearance where a stacked case and tray arrangement will be used.
• Includes one Edge 2-space and earring holder case - Clarifies what arrives in the carton so buyers can order the tray separately if needed.

Confirm Edge tray accessory fit

Key specs to confirm: This closet jewelry organizer case measures 6-1/2 inches wide, 16-1/4 inches deep, and 1-11/16 inches high. The product data states that this optional Edge case sits on top of an Edge tray, and the tray is sold separately. Before ordering, confirm that your existing or planned Edge tray matches the required size and layout for this jewelry tray top case. Also confirm that your installation area has enough vertical clearance for a tray plus case arrangement. Load rating, safety details, and any compliance information are not provided in the verified data and should be confirmed with the manufacturer or technical documentation.

What's included: One Rev-A-Shelf Edge 2-space and earring holder case in aluminum with a manganese finish.

What to verify before ordering: Confirm you are ordering for an Edge tray application, not as a standalone insert. Check tray compatibility, tray dimensions, available depth, stacked height clearance, finish preference, and whether your project already includes the tray base needed for this accessory.

Compare this aluminum earring holder case

Use the jewelry tray top case well

This Edge earring holder case is aimed at buyers who want a more defined jewelry storage layout inside a closet system rather than loose storage in an open tray. A common issue in closet organization is that small items such as earrings slide around, mix with other accessories, or become hard to sort when they share space with rings, watches, or personal items. This Rev-A-Shelf closet organizer accessory addresses that need by creating a dedicated case that sits on top of an Edge tray.

For a professional installer, the practical value is straightforward. The product has a verified application, a verified material, and verified dimensions. That makes it easier to plan around an existing modular closet system accessory layout. If a client already uses Edge trays, this jewelry tray top case can be considered as an add-on for more focused earring storage. If the project is still in design, the 6-1/2 inch width, 16-1/4 inch depth, and 1-11/16 inch height provide a starting point for confirming whether the tray and available space will support the accessory.

For a serious DIY buyer, the main benefit is organization with a known fit requirement. The product data clearly states that the case sits on top of an Edge tray sold separately. That means it should not be treated as a universal insert or a freestanding organizer. Buyers searching for an earring storage case, closet jewelry organizer case, or Edge tray accessory should verify the tray first, then confirm clearance in the intended drawer or closet section. The aluminum construction and manganese finish may also matter if you are trying to keep materials and appearance consistent across other closet accessories.

This product is especially relevant when the goal is to separate earring storage from general accessory storage without replacing the entire tray system. It is less about broad storage capacity and more about controlled organization within the Edge platform. If you need exact compartment dimensions, tray compatibility details beyond the stated use, or installation instructions, those details are not included in the verified data and should be checked before purchase.

Compare aluminum earring holder case details

When buyers compare this product type with other jewelry organizers, the most important difference is how it is intended to be used. This is not described as a universal drawer insert, fabric liner, or standalone jewelry box. The verified product data identifies it as an optional Edge case that sits on top of an Edge tray. That gives it a more defined application and makes compatibility review more important than with a generic organizer.

The aluminum earring holder case format may appeal to buyers who want a metal accessory as part of a coordinated closet system. The manganese finish gives a clear finish reference, which can help during specification and finish matching. The listed dimensions also make this product easier to evaluate than accessories that do not publish size information. A buyer can compare width, depth, and height against the tray surface and installation space before ordering.

From a reliability and planning standpoint, Rev-A-Shelf is clearly identified as the brand, and the item is part of the Edge offering within closet organization. That helps buyers who prefer to keep accessories within one product family rather than mixing unrelated parts. The included content is also clearly stated: one Edge 2-space and earring holder case. Because the tray is sold separately, ordering accuracy depends on confirming the full assembly you need. For trade buyers, that means checking the bill of materials. For homeowners, it means making sure the tray base is already owned or added to the order.

If you are comparing options, focus on three points: whether your project uses an Edge tray, whether the published dimensions fit your layout, and whether this dedicated earring storage case matches the level of organization you want inside the closet system.

Ask fit questions before ordering

Order the right Edge earring holder case

Edge earring holder case is a practical add-on when your project already uses, or will use, a compatible Edge tray. You get one aluminum case in a manganese finish, sized at 6-1/2 inches wide, 16-1/4 inches deep, and 1-11/16 inches high. Before purchase, confirm tray compatibility, stacked height clearance, and that you are ordering the tray separately if needed. That quick check helps prevent fit issues and makes sure this Rev-A-Shelf closet organizer accessory matches your intended jewelry storage layout.