Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica 9423-99 brass patina laminate sample gives you a 3 inch by 5 inch look at the DecoMetal metal finish before committing to full sheets on a job. This sample represents a solid aluminum sheet with an anodized finish, so you see the actual metal surface that will be on the finished installation. The etched finish shown on this sample is coated in enhanced polymers, which demonstrates how the design and coating work together in the vertical interior application. Because it uses the Grade 83 construction at 0.025 inches, or 0.7 mm, this sample reflects the actual thickness and feel of the finished DecoMetal solid metals and solid metal strips. The sample is identified by Formica Corporation under manufacturer part number Y0809423990305, which ties it directly to the 9423-99 brass patina design in the DecoMetal line for consistent selection and specification.
This Formica 9423-99 brass patina laminate sample is engineered to represent DecoMetal solid metals and solid metal strips in project planning. The solid aluminum sheet construction visible on the sample helps you judge how the metal character will read on vertical interior applications such as feature panels or similar surfaces. With the anodized finish present on the sample, you can evaluate color tone and surface uniformity under project lighting conditions. The etched finish coated in enhanced polymers allows review of both texture depth and the appearance of the protective coating in one piece. Because the sample uses Grade 83 at 0.025 inches, or 0.7 mm, it conveys how the final material will interact with adjacent surfaces and edge treatments in design mockups.
The 3 inch by 5 inch brass patina DecoMetal sample is sized for easy use at a desk, in a shop, or on site when coordinating finishes. Its solid aluminum sheet with an anodized finish allows comparison directly against other metals, laminates, or wood products used in the same vertical interior application. When reviewing the etched finish that is coated in enhanced polymers, designers and installers can see how pattern, reflection, and coating behave together across the small field, then extrapolate that to larger surfaces. Because this sample represents DecoMetal solid metals and solid metal strips, it becomes a practical reference when matching job notes, drawings, and finish schedules that specify the Formica 9423-99 brass patina design.
The Grade 83 construction at 0.025 inches, or 0.7 mm, shown on the sample gives a realistic sense of the material section, supporting decisions about transitions and visual weight in vertical interior installations. The anodized finish on the solid aluminum sheet demonstrates how the brass patina color is developed and locked into the surface, which is important when planning how the finish will read alongside other Formica HPL or surfacing materials. The etched finish with an enhanced polymer coating demonstrates how the design is protected, which helps set expectations about surface character in the completed work. Tying the sample to the Y0809423990305 manufacturer part number and the 9423-99 brass patina designation helps keep selections consistent from showroom decisions through ordering of DecoMetal materials for the woodworking shop.
The Formica 9423-99 brass patina laminate sample represents a solid aluminum sheet with an anodized finish from the DecoMetal solid metals and solid metal strips line for vertical interior applications.
The brass patina laminate sample uses Grade 83 construction at 0.025 inches, or 0.7 mm, so its thickness reflects the DecoMetal material used in vertical interior applications.
The sample shows an etched finish coated in enhanced polymers, so you can see the interaction between the etched design and its protective coating on the brass patina surface.
The Formica 9423-99 brass patina sample is engineered for vertical interior applications, reflecting how DecoMetal solid metals and strips perform visually in those installations.
The manufacturer part number Y0809423990305 identifies this sample as the Formica 9423-99 brass patina DecoMetal design, aligning the physical sample with catalog and ordering records.
The 3 inch by 5 inch sample size offers a manageable yet informative view of the brass patina etched and anodized finish when coordinating with other Formica HPL or surfacing materials.
Formica 9423-99 brass patina laminate sample, in the 3 inch by 5 inch format, gives an accurate view of the DecoMetal Grade 83 aluminum sheet at 0.025 inches, or 0.7 mm. The anodized and etched finish coated in enhanced polymers demonstrates how this brass patina design will present in vertical interior applications. With its direct tie to manufacturer part number Y0809423990305, this sample supports consistent selection and specification when planning DecoMetal solid metals and solid metal strips for woodworking and interior projects.
Sold In: 1 Each