Formica 9423-99 Brass Patina laminate sample gives you a 2 x 3 inch piece of the DecoMetal metal finish to review on the bench or at the job site. This small format helps you see the 9423-99 Brass Patina design directly against cabinet faces, fixtures, or wall panels before committing to full sheets. The sample represents a DecoMetal solid metal surface so you can judge how the metal character reads under your lighting. Using a clearly labeled sample with the Formica 9423-99 identification supports consistent color and design conversations between designer, shop, and installer. The compact size travels easily in a pocket or project folder, keeping the exact Brass Patina reference handy during layout and client walk-throughs.
This Formica 9423-99 Brass Patina sample represents a DecoMetal metal finish engineered for vertical interior applications, so it helps you evaluate the look specifically for wall panels, cabinet fronts, and similar surfaces that stand upright. The Grade 83 0.025 inch (0.7 mm) metal sheet lets you understand how the face material transitions at corners and exposed edges in vertical conditions. Because the aluminum is anodized in the Brass Patina design, you can see how the finish behaves on large vertical planes where glare and viewing angle change throughout the day. The etched and polymer-coated surface on the sample also previews how pattern and sheen read at normal standing eye levels, which supports more predictable results when you move to full-size work.
This Formica Corporation laminate sample is identified as 2X3 BRASS PATINA DECOMETAL in the SAP description, tying it directly to the 9423-99 Brass Patina design used in DecoMetal solid metals. That clear designation links the small sample to the full-size vertical interior applications mentioned in the product description, such as feature panels or cabinet faces that call for a metal look. Because it is a solid aluminum sheet with an anodized finish, the sample shows the same metal base construction that will appear on installed DecoMetal surfaces. This alignment between sample and installed surface helps designers and fabricators rely on what they see in the 2 x 3 piece when selecting finishes.
The Grade 83 0.025 inch (0.7 mm) DecoMetal sheet represented by this sample gives you a sense of how the Brass Patina metal face will visually sit next to other surfacing materials in a vertical run. The etched finish coated in enhanced polymers lets you examine how fine patterning interacts with the Brass Patina color tone, which matters when planning reveals, joint lines, or transitions at doors and panels that will be viewed up close. Since the product is engineered for vertical interior applications, the sample allows you to consider how the anodized and polymer-coated surface will look under typical interior lighting conditions used in commercial or residential interiors.
The Formica 9423-99 Brass Patina laminate sample represents a DecoMetal solid aluminum sheet in the Brass Patina design, so you can evaluate the actual metal face and finish before using related materials.
The Formica 9423-99 Brass Patina laminate sample is 2 x 3 inches, giving a compact piece that is easy to handle while still showing the pattern and finish in a practical viewing area.
The Brass Patina sample uses a solid aluminum sheet, allowing you to see and feel the same metal base that is used in DecoMetal solid metals and metal strips for vertical interior applications.
The Formica 9423-99 Brass Patina laminate sample represents Grade 83 at 0.025 inch (0.7 mm) thickness, which helps you understand the sheet profile when planning transitions to nearby surfacing materials.
The Brass Patina sample shows an anodized finish on aluminum with an etched design coated in enhanced polymers, so you can gauge reflectivity, pattern character, and surface appearance under interior lighting.
The Formica 9423-99 Brass Patina laminate sample is relevant for evaluating DecoMetal surfaces that are engineered for vertical interior applications, such as wall panels or cabinet fronts.
The Formica 9423-99 Brass Patina laminate sample from Wurth Baer Supply provides a labeled 2 x 3 inch reference of Grade 83 DecoMetal solid aluminum in the Brass Patina design. Using this sample, you can review the anodized, etched, and polymer-coated surface directly in the project environment and relate it to surrounding materials. When a specific metal appearance is critical on vertical interior work, this small DecoMetal Brass Patina sample supports more confident finish selection and coordination.
Sold In: 1 Each