
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
DecoMetal laminate 6423 Brushed Brass gives you a Formica Corporation metal laminate that delivers a brushed brass appearance on a dependable sheet for vertical interior applications. The 85 grade construction at .040 inch (1.0 mm) thickness provides a substantial laminate layer, so installers get a material that handles routing and trimming with a familiar HPL-like feel on site. This DecoMetal metal laminate uses a polished, anodized, matte, brushed or mirror aluminum or copper sheet with a phenolic back, creating a metal surface bonded to a stable core that behaves predictably during fabrication. The phenolic back prevents creasing, so the sheet resists kinking when handled, bent during positioning, or pulled into adhesive, which reduces material loss from damaged corners. That same phenolic back allows for improved adhesion to substrates, helping the sheet stay put under contact adhesive and supporting long-term bond performance on vertical panels, doors, or wall features.
This DecoMetal laminate is engineered for vertical interior applications, so it is suited to walls, casework faces, or door skins where the sheet stays upright and is not intended as a horizontal work surface. The phenolic back is designed to improve adhesion to substrates, giving a reliable bonding surface for adhesive application and pressing. Because the laminate uses a metal sheet bonded to a phenolic back at .040 inch (1.0 mm) thickness, it behaves similarly to other high-pressure laminates during layout, cutting, and trimming on vertical work. The brushed brass visual defined by the 6423 design lets installers plan panel breaks, seams, and reveals knowing the appearance will remain consistent from sheet to sheet on the same vertical run.
This Formica DecoMetal laminate in the 6423 Brushed Brass design is engineered for vertical interior applications, so it fits best on wall panels, cabinet ends, or other upright surfaces where a metal look is desired without fabricating from solid metal. The product uses a polished, anodized, matte, brushed or mirror aluminum or copper sheet with a phenolic back, giving a metal face bonded to a structural backing that behaves like a laminate panel rather than a thin metal skin. With an 85 grade construction at .040 inch (1.0 mm) thickness, it provides a solid feel and predictable stiffness on vertical installations, which matters when aligning multiple panels in a run. The brushed brass appearance specified by 6423 gives projects a repeatable brass-like tone and texture, allowing shops to build coordinated fronts, partitions, or accent bands using the same design ID. Because the phenolic back prevents creasing, this sheet can be moved from rack to saw to press with reduced risk of permanent bends.
The phenolic back that prevents creasing is central to delivering clean, repeatable results because it helps the DecoMetal laminate resist kinks while being positioned on the substrate, keeping the metal face smooth across the finished surface. That same phenolic back allows for improved adhesion to substrates, supporting even bonding across the panel, which is important for long, vertical spans where any weak spots might telegraph or loosen. The 85 grade .040 inch (1.0 mm) thickness gives a defined edge during trimming and finishing, so installers can create consistent reveals and returns along doors or panel joints. As a Formica Corporation DecoMetal laminate, the product sits within the Formica HPL family, giving fabricators a familiar handling experience in cutting, routing, and bonding processes tailored to vertical interior applications. The Brushed Brass 6423 design allows shops to specify this exact appearance by part number when reordering, supporting visual continuity on expansions or phased projects.
DecoMetal laminate 6423 Brushed Brass is a Formica Corporation metal laminate using a brushed brass design on a metal sheet with a phenolic back, intended for vertical interior applications where a metal look is desired.
This Brushed Brass 85 grade laminate is .040 inch (1.0 mm) thick, giving a substantial facing that handles like other laminate sheets during cutting, bonding, and trimming on vertical interior projects.
The phenolic back on this DecoMetal laminate prevents creasing and allows for improved adhesion to substrates, helping the sheet resist kinks and supporting a strong, even bond on vertical surfaces.
This Formica DecoMetal laminate is engineered for vertical interior applications, so it is suited to upright panels, faces, and similar installations rather than horizontal work surfaces.
This DecoMetal sheet uses a polished, anodized, matte, brushed or mirror aluminum or copper sheet with a phenolic back, combining a metal face with a structural backing for laminate-style fabrication.
The 6423 brushed brass design provides a specific visual reference, allowing shops to order and reproduce the same appearance on multiple panels and phases using a consistent design identifier.
Choose DecoMetal laminate 6423 Brushed Brass when a Formica Corporation metal laminate is needed for vertical interior applications that call for a brushed brass visual. The 85 grade .040 inch (1.0 mm) build gives fabricators a familiar laminate-style sheet to cut, route, and bond. Its metal face over a phenolic back combines the look of metal with a backing that prevents creasing and allows for improved adhesion to substrates. Using this specific 6423 Brushed Brass design and Y0806423990203 part number helps maintain a consistent appearance across cabinets, panels, and wall features on your next interior project.
Sold In: 1 Each