DecoMetal Laminate 6423 Brushed Brass 85 Grade 3 x 5

DecoMetal Laminate 6423 Brushed Brass For Design

DecoMetal laminate 6423 brushed brass provides a Formica Corporation metal laminate surface that uses a polished, anodized, matte, brushed or mirror aluminum or copper sheet with a phenolic back, so you get real metal appearance paired with a stable backing for fabrication. The 3 x 5 size lays out well on smaller vertical interior applications, helping reduce waste on feature panels or accents. Grade 85 at 0.040 inch (1.0 mm) thickness gives a substantial metal sheet feel that stays workable for typical laminate shop tools. The brushed brass DecoMetal finish delivers a controlled directional look that stays consistent from sheet to sheet when oriented carefully during layout. The phenolic back prevents creasing under normal handling and forming, which supports a smoother installation workflow on prepared substrates using standard adhesive methods suitable for phenolic-backed laminates.

Key Formica DecoMetal Laminate Project Advantages

• The 0.040 inch (1.0 mm) DecoMetal laminate thickness provides a true metal sheet presence while remaining thin enough for bonding to approved substrates, so fabricators can integrate it into vertical interior work without major build-up problems at edges.
• The phenolic back on the metal laminate prevents creasing, which helps the sheet stay flat during cutting and handling, reducing the risk of surface damage on the brushed brass face when moving between shop stations.
• The phenolic back also allows for improved adhesion to substrates, giving installers a more dependable bond line across the full 3 x 5 panel, which supports long-term hold on vertical interior applications.
• The construction using polished, anodized, matte, brushed or mirror aluminum or copper sheet with a phenolic back gives designers access to a true metal surface system, while shops still work with it as a laminate product in standard casework or wall cladding workflows.
• The DecoMetal laminate design is engineered for vertical interior applications, so the material selection aligns with typical wall, column, or furniture face work rather than high-wear horizontal surfaces, which helps set realistic expectations for project use.

Mounting DecoMetal Laminate On Interior Substrates

This Formica DecoMetal laminate uses a phenolic back that supports improved adhesion to substrates, so it integrates into standard laminate bonding sequences for vertical interior applications. The 0.040 inch (1.0 mm) thickness means fabricators can treat it as a specialty high-pressure laminate sheet during cutting, fitting, and trimming around reveals or edges. The 3 x 5 panel size helps installers maneuver sheets on site for wall or casework faces where full 4 x 8 sheets are unnecessary, easing installation in tighter spaces. Because the phenolic back prevents creasing, the sheet stays more resistant to kinking as it is placed, pressed, and rolled onto the chosen substrate.

Using Brushed Brass DecoMetal In Real Projects

Where This Brushed Brass Laminate Performs Best

This DecoMetal laminate 6423 brushed brass is engineered for vertical interior applications, so it suits wall panels, reception fronts, display faces, and other upright surfaces that benefit from a metal look without converting to full metal fabrication. The metal laminate uses a polished, anodized, matte, brushed or mirror aluminum or copper sheet with a phenolic back, providing a real metal surface bonded to a stable backing, which helps projects achieve metallic design intent while staying within laminate-based construction practices. The 3 x 5 sheet size slots well into smaller feature areas or segmented panel layouts where full-sheet dimensions are not necessary, which can reduce cutting loss and simplify material staging on site or in the shop. Grade 85 at 0.040 inch (1.0 mm) means the sheet handles as a robust laminate, supporting clean edges when processed with suitable tooling for high-pressure laminates.

Details That Support Repeatable Installation Results

The phenolic back prevents creasing during normal handling, so installers can position and adjust the DecoMetal laminate on the substrate without the sheet folding sharply, which helps preserve the brushed brass face. That same phenolic back allows for improved adhesion to substrates, giving more consistent contact across the panel, which supports uniform bond strength on vertical interior installations. Working at 0.040 inch (1.0 mm) thickness, fabricators can sequence cutting, trimming, and edge treatment similarly to other Grade 85 laminates, helping keep shop setups consistent across different decorative surfaces. Because the metal laminate construction is clearly defined as polished, anodized, matte, brushed or mirror aluminum or copper sheet with a phenolic back, planners can account for the metal layer in corner and joint details, coordinating adjacent materials without trial-and-error fitting.

Common Questions About 6423 Brushed Brass DecoMetal

Select DecoMetal Laminate 6423 Brushed Brass For Projects

DecoMetal laminate 6423 brushed brass from Formica Corporation delivers a 3 x 5 Grade 85, 0.040 inch (1.0 mm) metal laminate engineered for vertical interior applications, with a phenolic back that prevents creasing and allows for improved adhesion to substrates. For installers and fabricators planning metal-look wall panels, casework faces, or feature elements, this phenolic-backed aluminum or copper sheet construction offers a practical way to bring brushed brass into laminate-based workflows. Select this DecoMetal laminate when a real metal surface with laminate-style handling supports your next interior project.