Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Classic Series base cabinet Dartmouth pewter provides a 9 inch wide, 24 inch deep, 34-1/2 inch high Wolf 3112827 cabinet that fits narrow base runs while keeping a full working height for standard countertop layouts. The one full height door gives a clean, uninterrupted front, which suits tall item storage and keeps the opening accessible for tools and supplies. Cabinet fronts are made from 3/4 inch solid maple wood, so the stile-and-rail frame resists jobsite handling and daily use in busy kitchens or work areas. Rails are pocket drilled and assembled with 1-1/4 inch screws for rugged durability, so the face frame stays tight under repeated opening and closing. Side panels and bottom use 1/2 inch plywood with matching exterior laminate, giving a stable box that accepts fastening while presenting a coordinated outer finish. The Dartmouth pewter styling ties this cabinet into the broader Wolf Home Products Classic Series line.
This Dartmouth 9 inch wide base cabinet uses face-frame construction with rails pocket drilled and assembled using 1-1/4 inch screws, so joints stay tight when the cabinet is clamped, shimmed, and fastened during installation. Side panels and the bottom are glued and stapled into a 1/2 inch dado in the cabinet front frame, giving a positive mechanical lock that resists spreading when the cabinet is pulled to walls or neighboring units. The 1/2 inch plywood back panel is glued and nailed in a 1/2 inch dado and stapled to the hang rail and cabinet bottom, creating a box that handles wall anchoring forces without twisting. All-wood 3/4 inch corner blocks at every corner tie these elements together, supporting leveling adjustments and long-term use in typical kitchen or shop environments.
The Wolf Organization, LLC Classic Series Dartmouth 9 inch wide base cabinet fits runs needing a narrow unit that still stands 34-1/2 inches high and 24 inches deep, matching standard base cabinet footprints. The one full height door design creates a tall, unobstructed opening that works well for storing vertical items along walls, islands, or between larger cabinets. Cabinet fronts formed from 3/4 inch solid maple wood match other Wolf Home Products cabinets that use the same material approach, helping maintain a unified appearance across the installation. Side panels and bottom built from 1/2 inch plywood with matching exterior laminate allow this unit to sit flush with neighboring cabinets while presenting a consistent exterior surface. The 4-1/2 inch high x 4-1/16 inch deep toekick keeps the cabinet aligned with standard toe spaces in multi-cabinet layouts that use Wolf Classic Series base units.
The rails on this Dartmouth pewter base cabinet are pocket drilled and assembled with 1-1/4 inch screws, so the front frame holds alignment under daily door cycles, which reduces the chance of reveals drifting over time. Side panels and the bottom are glued and stapled into a 1/2 inch dado, creating a mechanical connection that spreads loads along the joint rather than relying on surface fasteners alone. The vinyl-covered (inside only) 1/2 inch plywood back panel, glued and nailed in a 1/2 inch dado and stapled to the hang rail and bottom, gives both structural bracing and a smooth interior, so stored items slide against a sealed surface. All-wood 3/4 inch corner blocks fixed at every corner reinforce the box during transport, handling, and leveling, which supports consistent door operation. The half-depth adjustable shelf of 3/4 inch plywood with bull-nosed, foil-covered front edges balances storage area with front-to-back access, while self-locking 1/4 inch clips keep the shelf positioned under typical cabinet loads.
The Classic Series Dartmouth pewter base cabinet is 9 inches wide, 24 inches deep, and 34-1/2 inches high, so it lines up with standard base cabinet height and depth in kitchen or shop layouts.
The cabinet front uses 3/4 inch solid maple wood rails pocket drilled and assembled with 1-1/4 inch screws, creating a sturdy face frame that holds up under repeated door use and alignment adjustments.
The side panels and bottom are 1/2 inch plywood with matching exterior laminate, and the back is vinyl-covered 1/2 inch plywood, giving a strong structure with finished surfaces inside and outside.
The cabinet uses a half-depth adjustable shelf of 3/4 inch plywood with bull-nosed, foil-covered front edges, supported by self-locking 1/4 inch diameter clips for stable, re-positionable storage.
The one full height door gives an uninterrupted opening from top to bottom of the cabinet, which suits storing taller items and keeps access straightforward along narrow cabinet runs.
The toekick is 4-1/2 inches high by 4-1/16 inches deep on standard cabinets, aligning this unit with other Wolf Classic Series base cabinets in continuous runs.
The Wolf Organization, LLC Classic Series Dartmouth 9 inch wide base cabinet in pewter gives you a one full height door layout built from 3/4 inch solid maple fronts and 1/2 inch plywood panels, ready to anchor narrow spots in a base run. With rails pocket drilled and fastened using 1-1/4 inch screws, plus 3/4 inch all-wood corner blocks at every corner, the cabinet box is engineered for everyday use in typical kitchen or workroom installations. Select this 3112827 cabinet when you need a narrow, 34-1/2 inch high base unit that matches Wolf Home Products Classic Series construction and aligns with standard 24 inch deep countertop applications.
Sold In: 1 Each