Classic Series base cabinet delivers a 24 inch wide, 24 inch deep, 34-1/2 inch high storage unit in the Wolf Dartmouth Pewter line, so installers can match an existing Wolf Home Products layout or build a new run to a known standard size. Cabinet fronts are made from 3/4 inch solid maple wood, providing a stable face frame and door/drawer fronts that handle everyday use in a kitchen or similar workspace. Two butt doors and one drawer create separate access zones, which helps lay out pots, pans, or general storage in a way that fits common base cabinet workflows. The toekick is 4-1/2 inches high by 4-1/16 inches deep on standard cabinets, giving comfortable foot clearance at the base while maintaining the cabinet height needed for typical countertop applications. The Wolf Organization, LLC branding ties this unit into the broader Wolf Home Products cabinet line.
All-wood 3/4 inch corner blocks are installed on all corners, tying cabinet sides, front, and bottom together to support loads transferred from the countertop or contents. A half-depth adjustable shelf of 3/4 inch plywood with bull-nosed, foil-covered front edges provides a sturdy storage surface while keeping the front edge smooth for handling stored items. The half-depth design opens space toward the back of the cabinet for taller items or plumbing lines on base runs that require them. The shelves are held in place with self-locking 1/4 inch diameter clips on the sides, so the shelf position can be set to a preferred height and remain locked during use without slipping under normal loading.
This Wolf Dartmouth base cabinet at 24 inches wide, 24 inches deep, and 34-1/2 inches high fits base runs that use standard-depth countertops and typical working heights, allowing the cabinet to sit in line with other Classic Series units. The Dartmouth Pewter finish on the cabinet fronts aligns with Wolf Home Products design schemes using that color, supporting visual continuity across a kitchen or similar project. Two butt doors across the lower opening give wide access to the interior, which helps when placing larger cookware or bins in the base section. One drawer located above offers a dedicated zone for smaller items, keeping them separate from the main compartment. The toekick dimension of 4-1/2 inches high by 4-1/16 inches deep provides room for an installer or user to stand close to the cabinet face while working at the counter.
The combination of 3/4 inch solid maple cabinet fronts and pocket-drilled rails assembled with 1-1/4 inch screws forms a robust frame, which helps doors and the drawer stay properly aligned once the cabinet is leveled and fastened in a run. Side panels and the bottom made from 1/2 inch plywood with matching exterior laminate work with the glued-and-stapled 1/2 inch dado joints at the front frame to resist twisting when shimming on uneven floors. Vinyl-covered 1/2 inch plywood back panels, glued and nailed in a 1/2 inch dado and stapled to the hang rail and cabinet bottom, create a rigid rear plane that supports fastening locations and helps maintain squareness under load. All-wood 3/4 inch corner blocks installed on all corners add extra bracing where sides, front, and bottom meet, which supports long-term use under countertops. The half-depth adjustable shelf in 3/4 inch plywood with bull-nosed, foil-covered front edges gives a smooth handling edge and solid support for stored items while leaving rear clearance for services or taller pieces. Self-locking 1/4 inch diameter shelf clips on the sides keep the shelf at the selected height, which is important when setting clearances for specific contents across multiple cabinets.
The Wolf 3112822 cabinet is 24 inches wide, 24 inches deep, and 34-1/2 inches high, which matches common base cabinet dimensions for standard countertop depths and working heights.
The cabinet uses 3/4 inch solid maple fronts, 1/2 inch plywood sides, bottom, and back, plus 3/4 inch corner blocks, creating a solid box that supports countertop and storage loads.
The cabinet has two butt doors and one drawer, separating lower storage from an upper drawer space to organize items by size and use.
The half-depth adjustable shelf is 3/4 inch plywood with a bull-nosed, foil-covered front edge, supported by self-locking 1/4 inch clips for secure, adjustable storage.
The cabinet fronts are solid maple in the Dartmouth Pewter style from Wolf Home Products, aligning with Classic Series Pewter design schemes for coordinated installations.
The toekick is 4-1/2 inches high by 4-1/16 inches deep, allowing comfortable foot space at the base while maintaining standard cabinet height for countertops.
This Wolf Dartmouth Classic Series base cabinet offers a 24 inch wide, 24 inch deep, 34-1/2 inch high unit that ties directly into the Dartmouth Pewter line, so layouts can follow standard Wolf dimensions. The 3/4 inch solid maple fronts, 1/2 inch plywood box construction, and 3/4 inch corner blocks work together to deliver a rigid base for countertops and stored contents. Two butt doors, one drawer, and a half-depth adjustable shelf provide a practical interior layout for many base positions. Use the verified dimensions, construction details, and Dartmouth Pewter style to align this cabinet with your planned run and Wolf Home Products project requirements.
Sold In: 1 Each