T149 plastic 60W universal remote control dimmer

T149 Remote Control Dimmer For 12V LED Loads

T149 plastic 60W universal remote control dimmer gives you handheld control over 12 volt LED lighting loads so you can adjust light levels from a distance, which simplifies fine-tuning task and accent lighting once fixtures are installed and cabinets are closed up.

This Tresco Lighting remote control dimmer is an LED dedicated remote control dimmer, so it is built specifically around LED performance at 12 volt, which helps keep light output stable across the dimming range in typical low-voltage cabinet and furniture applications.

The dimmer is designed for 12 volt systems and is rated at 96 watts, so it can serve higher-output LED runs within its wattage capacity while keeping all lights on that circuit following the same dimming response in a room installation.

The unit is identified by manufacturer part number L-LED-DIMRMT-12V8A, which ties it directly to Tresco LED systems and helps match it to existing layouts that already specify this part for new build or retrofit work.

The dimmer is described as universal for a room, and it can function either as a dedicated dimmer that only controls one dimmer in a room or as a universal dimmer that controls all dimmers in one room, which lets you set up single-zone or full-room control from the same remote.

The dimmer body measures 3-3/16 inches, which keeps the control compact so it can be located where needed without taking excessive space on a mounting surface or within a control area.

LED Dimmer Details That Support Real Jobs

• The T149 plastic 60W universal remote control dimmer uses a handheld remote interface for 12 volt LED lighting, letting you adjust levels after panels and trim are installed, which reduces time spent returning to hidden drivers or wall locations.
• The LED remote control dimmer is LED dedicated, so its operation is described specifically for LED loads, helping the lighting respond consistently when dimmed in typical cabinet or display setups where smooth LED behavior is important.
• The 12 volt rating with 96 watts capacity gives a clear electrical window for planning your LED runs, allowing you to size the number of fixtures on a dimmed line while staying within the stated wattage capability.
• The ability to serve as a dedicated dimmer for one dimmer in a room or as a universal dimmer that controls all dimmers in one room lets you design either single-area or room-wide control from the same product, which simplifies layout choices.
• The 3-3/16 inch dimension keeps the dimmer compact, which frees space for other components in tight cabinet or millwork cavities and helps when grouping multiple controls in a small control zone.

Remote LED Dimmer Setup And Room Control Use

This LED remote control dimmer is described for 12 volt LED installations, so it works within low-voltage layouts that already use 12 volt Tresco fixtures, letting the dimmer sit in line with those systems while the remote manages the light level changes from a distance.

The dimmer can act as a dedicated dimmer that only controls one dimmer in a room or as a universal dimmer that controls all dimmers in one room, giving you flexibility to set up either a single area on its own remote channel or have one remote govern all dimmers in that space.

Because the product is LED dedicated and specified for 12 volt use with 96 watts, it fits into design work where the wiring, transformer selection, and LED fixture runs are built around 12 volt Tresco Lighting systems using that wattage window.

The 3-3/16 inch size keeps the dimmer device small enough for typical cabinet, furniture, or display locations, making it easier to assign a consistent mounting spot from project to project without needing large cutouts or control compartments.

How This 12V Dimmer Works In LED Projects

Room-Wide Or Single-Zone LED Dimmer Control

The LED remote control dimmer is described as a dedicated dimmer that only controls one dimmer in a room, and also as a universal dimmer which controls all dimmers in one room, so you can decide whether one remote runs a single zone or every dimmer.

Using it as a dedicated dimmer lets you isolate one lighting area within a room on its own remote, which is useful when separate cabinet runs or display sections need different light levels while still using the same 12 volt infrastructure.

Using it as a universal dimmer lets a single remote control all dimmers in one room, which creates simple, synchronized lighting changes where every attached dimmer responds together for presentations, showroom lighting, or coordinated residential scenes.

The 3-3/16 inch size keeps the dimmer compact and easier to place along a control run, which helps when you are planning multiple dimmers in a room and need each one located without crowding other electrical or low-voltage components.

LED-Dedicated 12V Operation For Tresco Systems

The product is identified as an LED dedicated remote control dimmer with 12 volt operation, so it is described specifically for LED use in low-voltage systems, aligning with common under-cabinet, furniture, and display lighting layouts that run at 12 volt.

The 96 watts rating on this LED remote control dimmer sets a clear load limit for the controlled circuit, giving you a straightforward number to use when calculating how many 12 volt Tresco fixtures can be placed on the dimmed output.

The SAP description and manufacturer part number L-LED-DIMRMT-12V8A tie this dimmer directly into Tresco Lighting product families, so it fits project specifications that call out that part number for consistency between drawings, RFQs, and field installation.

The note stating that Tresco fixtures are designed to operate only with genuine Tresco transformers, power cables, connecting cables and switches describes how Tresco components are intended to work together, which supports using this dimmer in layouts that keep to that family.

The web description explains that it is recommended to use Tresco accessories with Tresco fixtures, indicating that projects already standardized on Tresco components can pair this dimmer with existing Tresco layouts to maintain a single-system approach.

Common Questions About This Tresco LED Dimmer

Choose This 12V Remote Dimmer For Room Control

This T149 plastic 60W universal remote control dimmer from Tresco Lighting provides LED dedicated dimming for 12 volt systems with a 96 watts rating, giving you a defined range for planning your low-voltage LED loads in cabinets, displays, or furniture.

With the ability to function either as a dedicated dimmer that only controls one dimmer in a room or as a universal dimmer which controls all dimmers in one room, it supports both zoned and room-wide control schemes from the same product.

The 3-3/16 inch size and LED-focused design let you integrate this dimmer into Tresco-based layouts that specify L-LED-DIMRMT-12V8A, so you can select it when a 12 volt LED remote control dimmer is required for the project scope.