Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
concealed flat bracket extended describes this Pro Value Series steel bracket designed for concealed support of countertops, work surfaces, floating shelves, standard shelves, ADA accessible surfaces, benches, and training room surfaces. Steel construction provides a rigid support arm that carries load through the bracket body, which matters when building surfaces that need dependable structural support. The upper extension above the support arm adds material where leverage is highest, which improves strength when supporting deeper tops or shelves. A 1 inch width concentrates the bracket into a slim profile, which helps when fitting between wall finishes and stud layouts. The 12 inch depth matches common shelf and top depths, giving predictable overhang relationships in layout. A 20 inch height gives a tall bearing surface along the stud, which spreads load vertically and supports taller applications such as work surfaces and benches.
Vertical and horizontal adjustability holes in this concealed flat bracket allow movement during mounting, which helps fine-tune the bracket position to match shelf heights, countertop levels, or bench layouts. The bracket is supplied as a matched left-handed and right-handed pair per box, so installers can support both sides of a span with mirrored geometry for balanced loading. Square mounting holes that lock the bolt in place allow a single tool to tighten the 3/8 inch-16 x 4 inch bolts, which saves time when working from a ladder or under a counter. The 20 inch high bracket body provides multiple hole locations along the stud, which helps match site conditions while still tying into solid framing. A 1 inch width and 12 inch depth allow this bracket to sit within typical wall and shelf geometries, supporting common shelving and work surface dimensions.
This Pro Value Series concealed flat bracket is specified for countertops, which positions the 12 inch depth to carry front overhang while tying load back to the wall stud. In work surfaces, the steel construction and upper extension above the support arm support repeated loading across desks or shop stations. For floating shelves, the concealed mounting into the stud lets the shelf appear unsupported while the 20 inch height distributes load through multiple fastener locations. Standard shelves benefit from the same concealed support, creating clean lines in closets or storage runs. ADA accessible applications use the concealed support to hold tops while preserving clear knee space, and benches and training rooms use the bracket strength and adjustability to set consistent heights across multiple locations.
Steel construction on this concealed flat bracket resists deformation as loads are applied, which keeps countertops, shelves, and benches aligned over time. The upper extension above the support arm shifts more steel above the critical bend point, which supports higher moment capacity when setting deeper or heavier surfaces. Vertical and horizontal adjustability holes give incremental movement during installation, allowing installers to bring multiple brackets into plane without reworking studs. Square mounting holes locking the bolt in place mean the 3/8 inch-16 x 4 inch bolts stay oriented while tightening, which helps when working one-handed under a work surface. The bracket is supplied as a matched left-handed and right-handed pair per box, so installers can support both sides of a span with mirrored geometry for balanced loading. The textured powder coat white finish provides a consistent surface that coordinates with light-colored shelving or casework where any exposed portion may be seen.
The concealed flat bracket measures 1 inch wide, 12 inches deep, and 20 inches high, which fits common shelf and countertop depths while providing tall engagement along the stud.
The bracket is supplied as a matched left-handed and right-handed pair per box, so installers can support both sides of a span with mirrored geometry for balanced loading.
The vertical and horizontal adjustability holes allow small position changes on the stud, which helps level tops and align floating shelves without relocating the bracket.
The upper extension above the support arm adds steel where bending forces are highest, which supports stronger concealed backing for deeper shelves and countertops.
Square mounting holes capture the head of the mounting bolt, allowing tightening with a single tool and reducing spinning during installation in stud bays.
The bracket has a textured powder coat white finish, which provides a uniform appearance where parts of the steel bracket remain visible under tops or shelves.
The Pro Value Series concealed flat bracket extended, measuring 1 inch wide by 12 inches deep by 20 inches high, offers steel construction and an upper extension above the support arm for stronger concealed support of countertops, shelves, benches, and work surfaces. The bracket is supplied as a matched left-handed and right-handed pair per box, so installers can support both sides of a span with mirrored geometry for balanced loading. The textured powder coat white finish coordinates with many shelving and work surface designs. For projects calling for concealed support in closets, garages, ADA accessible layouts, or training rooms, this concealed flat bracket extended provides a defined geometry and mounting method ready to integrate into stud-framed walls.
Sold In: 2 Each
