
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Salice Progressa 12 inch soft close undermount slides are full extension drawer runners designed for professional cabinet installations where smooth travel and clean appearance matter. The undermount design supports drawers from below, which keeps drawer sides clear for a frameless look and gives more usable interior space near the drawer sides in finished cabinets. A synchronized mechanism coordinates both runners, helping the drawer move evenly on each side, which reduces racking under load. True progressive action with rack and pinion action delivers consistent motion from start to fully open, which helps drawers feel controlled rather than jerky as they are pulled out. The soft-close function slows the final part of travel, which reduces slamming and helps protect drawer fronts and joinery over time.
These undermount drawer slides provide height adjustment of plus 2.5 mm, which gives a small vertical range to fine-tune drawer front reveals relative to adjacent fronts once the cabinet is installed. Side adjustment of plus or minus 1.5 mm offers lateral movement, which helps align gaps between fronts or correct for minor drawer box skew without rebuilding the box. Depth adjustment of plus or minus 3 mm lets the installer set how the front sits relative to the face frame or cabinet edge, which is useful to flush faces across a bank of drawers or compensate for variances in drawer front thickness.
This 12 inch Salice Progressa full extension drawer runner works in drawer boxes built from 13 mm - 16 mm material thickness, which aligns with many metric and nominal 1/2 inch side materials used in cabinet shops. The undermount configuration supports the drawer from beneath, which leaves the drawer sides free of hardware and suits modern frameless or face-frame cabinetry where a concealed slide is preferred. Dynamic load capacity of 100 lb with 120 lb static support means these slides can be used in kitchen base cabinets, bathroom vanities, and utility cabinets that carry everyday items within that range. The synchronized mechanism is engineered for that 12 inch length, which helps short drawers run smoothly despite their limited travel.
The combination of height, side, and depth adjustment on this runner gives the installer multiple planes of fine-tuning to correct small build variances at the cabinet. Height adjustment of plus 2.5 mm allows small shifts up to close reveal gaps between stacked drawers without remounting brackets. Side adjustment of plus or minus 1.5 mm lets both slides be set so the drawer front sits evenly between vertical neighbors, which is important when doors and drawers share tight, modern gaps. Depth adjustment of plus or minus 3 mm helps bring fronts flush across different cabinets, which is useful when substrate or front thickness varies slightly between runs. Because motion is based on true progressive action with rack and pinion action, once alignment is set the drawer movement stays even along its full extension, supporting repeatable results across a bank of drawers. The fact that the product meets and exceeds ANSI BHMA A156.9-2020 Grade 1 Standard ties these performance characteristics to a recognized standard, which indicates that the motion, load capacity, and adjustments are tested for demanding cabinet applications.
The Salice Progressa 12 inch soft close undermount slides are designed for drawer material thickness from 13 mm to 16 mm, which matches many common cabinet drawer side constructions.
The Salice Progressa undermount drawer runner has a load capacity of 100 lb dynamic and 120 lb static, supporting typical kitchen and utility drawer loads within that range.
The Salice Progressa full extension drawer slides use a synchronized mechanism with true progressive action and rack and pinion action, providing smooth, even travel along the entire stroke.
The Salice Progressa drawer slides offer height adjustment of plus 2.5 mm, side adjustment of plus or minus 1.5 mm, and depth adjustment of plus or minus 3 mm to fine-tune front reveals.
The Salice Progressa undermount drawer slides meet and exceed ANSI BHMA A156.9-2020 Grade 1 Standard, aligning their performance with a recognized cabinet hardware benchmark.
The Salice Progressa 12 inch soft close undermount slides are 100 percent made in Italy, reflecting their origin for projects that specify Italian hardware.
The Salice Progressa 12 inch soft close full extension undermount drawer slides combine a synchronized mechanism, true progressive action, and 13 mm - 16 mm drawer material thickness support for professional cabinet work. Load capacity of 100 lb dynamic and 120 lb static helps them handle everyday service in kitchens, baths, and utility spaces. With height, side, and depth adjustment ranges built in, these slides support precise alignment of drawer fronts across a bank. Meeting and exceeding ANSI BHMA A156.9-2020 Grade 1 Standard and being 100 percent made in Italy, they offer defined, tested performance for installers choosing undermount runners for their next project.
Sold In: 1 Set