Salice Progressa 15" Soft-Close Full Extension 100 lb Undermount Drawer Slide, Zinc, G5U6S381XXF6

15 Inch Undermount Drawer Slide for Face-Frame and Frameless Cabinets

The Salice Progressa 15 inch undermount drawer slide is a concealed, full-extension runner with integrated soft-close, built for drawer boxes with 1/2 to 5/8 inch sides and rated 100 lb per pair. It installs in both face-frame and frameless cabinets, making it a practical choice across traditional and modern casework alike.

Key Features

• Full extension brings the entire 15 inch drawer out to the cabinet face, putting every inch of the interior within reach.
• Integrated soft-close catches the drawer near the end of travel and settles it shut silently, without a slam.
• 100 lb capacity per pair handles loaded bathroom vanity drawers, spice pull-outs, and shallow kitchen drawers without strain.
• Face-frame and frameless compatibility covers the two most common cabinet constructions in one slide model.
• Steel construction with zinc finish delivers long-term indoor durability in a profile that stays hidden beneath the box.

Where This Slide Fits

A 15 inch undermount is sized for shorter drawer runs: bathroom vanity drawers, bathroom tower cabinets, shallow base cabinets, and utility drawers where the interior depth does not support a longer slide. It also suits upper-cabinet pull-outs and small island drawers where a full 18 or 21 inch runner simply will not fit. Because Progressa works in both face-frame and frameless construction, it serves shops and contractors who build both styles and want a single undermount to stock for the shorter-length positions.

Build the drawer box to the Salice Progressa specification for this length: nominal 15 inch depth, the correct box width for the series' side clearance, a bottom recess, and a rear notch sized for the locking-device drilling. A box built to a different spec will not seat correctly on the runners.

Construction and Finish

The Progressa slide is steel throughout, with a zinc finish that protects the members through years of indoor use. Because the slide mounts beneath the drawer box and stays concealed when the drawer is open, the finish serves a functional role rather than a decorative one — it will not be seen in normal operation. The roller-bearing carriage keeps travel smooth and quiet under load, and the integrated soft-close damper requires no separate add-on hardware.

In face-frame cabinets, the slide's rear end needs support from rear mounting brackets. Those brackets are Progressa-specific and sold separately — plan for them when ordering for traditional face-frame casework. In frameless cabinets, the slide fastens directly to the cabinet side panel with no additional rear hardware required.

Who This Is For

Cabinet shops producing bathroom vanities, bath towers, and mixed-construction residential work will find the 15 inch Progressa fits the positions that longer undermounts cannot. Designers specifying handle-less or hardware-minimal bathrooms get the clean look of a concealed runner with reliable soft-close. Contractors sourcing for smaller drawer openings on a renovation can stock this length alongside longer Progressa slides and keep locking devices and brackets consistent across the job. For drawer side material between 1/2 and 5/8 inch, this is a direct, no-compromise fit.

Frequently Asked Questions

Concealed Performance in Shorter Drawer Positions

The 15 inch Progressa delivers the same soft-close, full-extension performance found in longer undermount slides, scaled to the drawer positions where space is the constraint — and it does it in both face-frame and frameless cabinets without switching systems.