Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Salice Progressa+ 14 inch push-to-open undermount drawer slide delivers full-extension, handle-less operation for face-frame and frameless cabinets, with a 170 lb per pair capacity that puts it well above the standard kitchen-drawer class. A light press on the front ejects the drawer; the rest is clean wood and no visible hardware.
At 14 inches, this slide is sized for shallower base drawers and wall-cabinet pull-outs — spice drawers, bathroom vanity drawers, and lower utility drawers where a short box is specified. The push-to-open function makes it the natural pick wherever a handle-less or slab-front design is in play: modern flat-panel kitchens, built-ins with integrated fronts, or any application where exposed hardware breaks the line of the casework. The 170 lb rating opens this slide to heavier-than-typical contents — dense pantry goods, tool storage, or file applications where a standard 90 to 100 lb undermount would be undersized.
Steel members with a zinc finish give the Progressa+ the structural backbone behind its heavy-duty rating. Because the slide mounts beneath the drawer box and stays fully concealed when open, the finish is functional rather than decorative — it protects the steel through years of indoor cycling without contributing to the visible aesthetic. The mechanical push-to-open trigger is part of the slide assembly; closing is without damping on this model, so the drawer stays where it is left until pushed shut. If a damped, silent close is the priority over handle-less operation, a soft-close model in the Progressa line is the appropriate alternative.
Cabinet shops building handle-less modern kitchens or custom built-ins will find the combination of push-to-open and a 170 lb rating covers a wider range of drawer contents than most concealed slides in this length. Designers specifying frameless European-style casework and contractors working in face-frame construction both have a path here — the Progressa+ accommodates both cabinet types with the correct rear mounting hardware for face-frame installs. Homeowners retrofitting a drawer for a cleaner look who already have an existing drawer box should note that undermount slides require the box to be built to the Salice specification for this series, including the correct side thickness, box-width formula, rear notch, and locking-device drilling; an off-spec box will not seat correctly.
No. This is a mechanical push-to-open model — the drawer opens with a press and closes without a damper. It does not combine soft-close and push-to-open. If damped closing matters, choose a soft-close variant in the Progressa line instead.
The source data does not specify a side thickness range for this SKU. Confirm the compatible drawer side thickness with the Salice Progressa+ installation documentation before building the box.
Locking devices for the Progressa+ are series-specific Salice components. Whether they ship with this slide or are sold separately should be confirmed at the time of order; do not substitute locking clips from other undermount brands or series.
Yes. Face-frame cabinets need rear mounting brackets to support the back end of the slide behind the frame. Those brackets are series-specific to the Progressa+ and are sold separately; confirm the correct bracket for this series before the install.
Per pair, as undermount load ratings are stated throughout this catalog. One pair of slides carries drawers loaded up to 170 lb.
The Progressa+ 14 inch push-to-open slide gives heavy-duty carrying capacity and a clean, hardware-free front to any cabinet where the box is built to spec and the design calls for a touch to open.
Sold In: 1 Set