Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Salice Progressa+ is a 20 inch (500mm) full-extension undermount drawer slide with a mechanical push-to-open mechanism, rated 170 lb per pair and built for both face-frame and frameless cabinets. It is the right choice when the drawer needs to open with a touch rather than a pull and the load rules out a standard-capacity slide.
The Progressa+ earns its place in drawers that combine a handle-less aesthetic with a demand for real carrying capacity. Think base cabinet drawers loaded with cast iron cookware, deep pots-and-pans pull-outs, or oversized utility drawers in a cabinetry run where every front is flat and hardware-free. At 170 lb per pair, it covers loads that a standard kitchen undermount would be pushed beyond. The 20 inch (500mm) nominal length suits standard base cabinet depths, and the full-extension travel means nothing stays buried at the back of the box.
Because this version fits both face-frame and frameless cabinets, it also simplifies procurement on mixed projects where the same drawer specification runs across different cabinet constructions.
The slide body is steel with a zinc finish — the standard for concealed undermount hardware that lives out of sight and handles repeated cycling under load. The push-to-open mechanism is mechanical: a press on the front face triggers the ejection, and the drawer closes without damping. This is not a soft-close model. If a damped, silent close matters as much as the handle-less open, choose a soft-close model from the Progressa+ line instead. On this version, closing speed and noise follow the drawer contents and how firmly it is pushed in — plan the front gap accordingly so the mechanism has the travel it needs to trigger cleanly.
Cabinet shops running contemporary kitchen or bath lines where the design calls for slab fronts with no visible hardware will find the Progressa+ a practical heavy-duty option. The 170 lb rating also makes it a realistic choice for furniture and storage applications where drawer contents are dense — shop storage, medical casework, or residential utility rooms. Designers specifying handle-less layouts can call out face-frame or frameless construction and use the same SKU throughout. For production volume, the slide's zinc steel construction and Salice's Progressa+ system keep the installation process consistent across a run.
No. The Progressa+ push-to-open model opens mechanically and closes without a damper. The drawer will close at whatever speed it is pushed. If you need both touch opening and a damped close, look at a combined push-to-open soft-close model in the Progressa+ line.
The product attributes in the listing do not specify a drawer side thickness for this SKU. Confirm the compatible side thickness range with the Salice Progressa+ installation specification before building the drawer box — the box width formula, side thickness, rear notch, and locking-device drilling must all match the series spec.
Locking devices are not confirmed as included with this SKU. Progressa+ front fixing clips are series-specific and should be ordered from the same system. Confirm inclusion at the time of order.
The slide is rated for both face-frame and frameless cabinets, but face-frame installations typically require rear mounting brackets to support the back of the slide. Those brackets are series-specific — confirm the correct Progressa+ rear bracket before installing in a face-frame cabinet.
Per pair, as load ratings throughout this catalog are stated. One pair of slides — one left, one right — carries 170 lb combined.
The Salice Progressa+ 20 inch push-to-open slide delivers full access and a 170 lb load rating behind a completely handle-free front, in the cabinet construction your project calls for.
Sold In: 1 Set