wood cutlery drawer insert gives a kitchen drawer a defined place for forks, knives, spoons, and serving pieces while keeping the layout consistent. The Rev-A-Shelf Craftsman Collection Wood Cutlery Drawer Insert is a cutlery tray insert made from solid maple with a semi-gloss finish and recessed black wire accents. This kitchen drawer insert is designed for 5/8 inch thick drawer boxes in a 21 inch wide application with a 1-1/2 inch face frame. It includes eight storage compartments, a removable non-skid black vinyl mat, and two screws. Buyers comparing a drawer organizer insert or checking drawer insert dimensions should note the stated minimum trim size of 14.22 inches by 16.39 inches before ordering.
Key specs to confirm: This maple cutlery drawer insert is listed at 16-1/4 inches and is designed for 5/8 inch thick drawer boxes in a 21 inch wide drawer application with a 1-1/2 inch face frame. The web description states a minimum trim width and depth of 14.22 inches x 16.39 inches. Before purchase, confirm your actual inside drawer space, drawer box thickness, and whether the face frame condition matches the stated application. If you need clearance details, exact compartment measurements, or any load, compliance, or safety information, those details must be confirmed with the manufacturer or technical documentation.
What's included: One wood drawer insert, one removable non-skid black vinyl mat, and two screws.
What to verify before ordering: Check drawer box thickness, inside drawer width and depth, face frame size, and whether your drawer is the intended 21 inch wide application. Also confirm that the compartment layout suits the flatware and utensils you plan to store.
A cutlery tray insert is usually chosen when a drawer has enough room for flatware but lacks a clear layout. In many kitchens, loose utensils slide together, larger serving pieces mix with standard silverware, and the drawer becomes harder to use during meal prep or cleanup. This Rev-A-Shelf cutlery tray addresses that common issue with a fixed wood organizer layout and eight storage compartments.
For a cabinet shop, remodeler, or serious DIY buyer, the practical value starts with fit. This kitchen drawer insert is designed for 5/8 inch thick drawer boxes and a 21 inch wide application with a 1-1/2 inch face frame. Those details matter because drawer inserts do not perform well when the box thickness or opening conditions differ from the intended design. Buyers searching for a drawer organizer insert often focus on appearance first, but the better approach is to confirm the drawer insert dimensions and cabinet construction before ordering.
The material and finish also affect day-to-day use. Solid maple construction gives the insert a stable wood structure, while the semi-gloss finish provides a finished interior surface that suits visible drawer storage. The recessed black wire accents help define the compartments visually, which can make it easier to separate forks, spoons, knives, and other utensils at a glance. The removable non-skid black vinyl mat adds another practical detail by helping reduce movement inside the insert and giving the buyer a component that can be removed for maintenance.
This maple cutlery drawer insert can be a good fit for new cabinetry, kitchen upgrades, or drawer retrofits where the drawer size matches the stated application. If your project involves custom drawer boxes, unusual side thickness, or a different face frame condition, confirm all measurements before installation. If you need exact compartment widths for specialty utensils, those dimensions should be verified with product documentation before purchase.
When buyers compare one kitchen cabinet drawer insert to another, the most useful differences are usually material, included parts, and stated fit requirements. This product is clearly described as a wood cutlery drawer insert made from solid maple, not a generic plastic tray. That distinction matters for buyers trying to match a wood drawer interior or maintain a consistent cabinet finish package.
Another point to compare is how much fit guidance is actually provided. This Rev-A-Shelf cutlery tray includes several useful installation references: it is designed for 5/8 inch thick drawer boxes, a 21 inch wide drawer application, and a 1-1/2 inch face frame, with a stated minimum trim width and depth of 14.22 inches x 16.39 inches. Those published details help reduce guesswork. A buyer can measure the drawer, compare the box construction, and decide whether the insert is likely to fit before placing an order.
Included components also matter. Here, the package includes one wood drawer insert, one removable non-skid black vinyl mat, and two screws. That makes the listing more useful for installers because the buyer knows the basic contents in advance. The eight-compartment layout is another practical comparison point. Instead of a broad open tray, this drawer insert for cutlery is intended to separate contents into defined sections for repeatable organization.
For buyers evaluating options, the safest approach is to compare verified dimensions, drawer box thickness requirements, and included parts rather than relying on assumptions. Follow manufacturer installation guidance and local building requirements where applicable.
This wood cutlery drawer insert is designed for 5/8 inch thick drawer boxes in a 21 inch wide application with a 1-1/2 inch face frame, so buyers should measure before ordering.
This cutlery tray insert lists a minimum trim width and depth of 14.22 inches x 16.39 inches. Confirm your available drawer space against those numbers.
This Rev-A-Shelf product is a solid maple drawer insert with a semi-gloss finish and recessed black wire accents.
This drawer insert for cutlery has eight storage compartments for separating flatware and utensils.
The Rev-A-Shelf cutlery tray includes one removable non-skid black vinyl mat.
This kitchen drawer insert includes two screws along with the wood insert and removable vinyl mat.
This maple cutlery drawer insert is specified for 5/8 inch thick drawer boxes. Buyers should confirm compatibility before installation.
This product data confirms eight compartments, but exact compartment measurements are not listed here and should be verified before ordering if critical.
This kitchen cabinet drawer insert should be checked for inside drawer width, depth, drawer box thickness, and face frame condition. Follow manufacturer installation guidance and local building requirements where applicable.
Rev-A-Shelf cutlery tray is a practical choice when you need a solid maple insert with a defined eight-compartment layout for a matching drawer application. The package includes the wood insert, a removable non-skid black vinyl mat, and two screws. Before purchase, confirm the minimum trim size, your inside drawer measurements, the 5/8 inch drawer box thickness requirement, and the 21 inch wide drawer application with a 1-1/2 inch face frame so the insert fits the project as intended.
Sold In: 1 Each