White River Tambour Panel Style 104 is a solid wood tambour panel in red oak sized 12 inches wide by 48 inches long, so it spans typical cabinet or appliance garage openings with continuous grain and predictable coverage. The panel is built with a 1 inch single bead profile, which creates a regular linear pattern that reads cleanly across doors, appliance garages, or wall details. The solid wood construction in red oak provides a workable hardwood surface that can be machined or detailed as part of a larger millwork run. Each panel is made from premium North American hardwoods, so it brings consistent hardwood quality to custom shops and repeat jobs. The panel is unfinished, which allows you to bring the color and sheen into line with surrounding doors, trim, and casework. Tambour is supplied with a flexible backing that bends, allowing the panel to follow curves and corners smoothly in appliance garages, radius cabinets, or wrapped columns.
This unfinished solid wood tambour panel is designed to be attached to a solid substrate using standard construction or paneling adhesive, so installers can set it onto cabinet panels, door cores, or wall backers without specialized clips. Because the panel has a flexible backing, it conforms to the substrate as the adhesive cures, which helps maintain continuous contact along curves and corners. The 12 inch by 48 inch size works well with common cabinet and appliance garage layouts, so installers can plan substrate breaks and adhesive coverage to match full panel dimensions. Using a solid substrate under the tambour gives the flexible assembly a firm support layer, which helps it track cleanly along guides or stay stable as a decorative surface. The unfinished red oak face arrives ready for shop finishing after the panel is mounted and acclimated, so finishing steps can follow the same workflow as other red oak components on the job.
This red oak tambour panel sits in the Appliance Garages & Tambour Doors product class, which aligns it with cabinet applications such as appliance garages and similar enclosures where a flexible wood surface is needed. The 12 inch width suits compact cabinet bays and narrow vertical runs, so it works in upper cabinet appliance garages, small niches, or accent panels within larger wall units. The 48 inch length supports horizontal garage doors and short vertical applications, allowing fabricators to cut from a single piece for many standard cabinet modules. Because the backing is flexible, the tambour can wrap into corners and follow curved guides, making it practical for radius cabinets, arched enclosures, or column details that require a continuous hardwood face. The solid red oak construction coordinates with other red oak components, so shops can integrate this panel into red oak kitchens, built-ins, or custom furniture projects using the same species across doors, frames, and moldings.
The defined 1 inch single bead profile gives a predictable pattern, which simplifies layout when aligning the tambour with door rails, stiles, or adjacent moldings for a clean visual transition. Each panel features natural variations in color and grain, which adds visual depth once finished and helps break up large flat surfaces in cabinetry or wall treatments. Because the tambour is unfinished, the material can stretch and acclimate for at least 48 hours before finishing, supporting dimensional stability before stain or topcoat are applied. That acclimation window allows the flexible backing and solid wood slats to settle, which supports smoother movement when the panel is used in a rolling door application. Premium North American hardwood construction means the material accepts common shop sanding and finishing sequences, so finishing teams can use familiar abrasives and coatings on the red oak surface. Being made in the USA supports job planning where consistent profile, species, and quality are important from one project phase to the next.
White River Tambour Panel Style 104 measures 12 inches wide by 48 inches long, which fits many appliance garages and narrow cabinet runs in a single continuous panel.
The tambour panel is made from premium North American hardwoods in red oak, providing a solid wood face that aligns with red oak cabinets, trim, and millwork.
The tambour panel is attached using standard construction or paneling adhesive to a solid substrate, allowing installers to bond it to cabinet panels or similar backers.
The panel uses a flexible backing that bends, so the solid wood face can follow curves and corners in appliance garages, radius cabinets, or column wraps.
The tambour is unfinished, allowing finishing teams to apply stains or clear coats that match surrounding red oak casework and align with project finish schedules.
White River Tambour Panel Style 104 has a 1 inch single bead profile, creating a consistent linear pattern that supports clean alignment with other cabinet components.
This unfinished solid wood tambour panel in red oak brings a flexible backing, a 1 inch single bead profile, and 12 inch by 48 inch sizing, so it fits appliance garages and similar cabinet runs with predictable coverage. The premium North American hardwood construction and natural color and grain variation provide a hardwood face that integrates smoothly with red oak casework. Using standard construction or paneling adhesive over a solid substrate keeps installation in familiar territory for millwork and cabinet shops. For projects that call for curved movement or a continuous red oak tambour surface, this White River Tambour Panel Style 104 offers a defined profile and format tailored to professional woodworking workflows.