White River Tambour Panel Style 104 is a solid wood panel with a flexible backing that bends, so it follows curves and corners where rigid sheet goods fight you. The 12 inch width and 48 inch length give a predictable coverage area, which helps with layout in appliance garages, cabinet ends, or wall details. The 1 inch single bead profile defines regular, repeating lines across the surface, which produces a consistent visual rhythm on doors or panels. The panel is paint grade, so it is designed to accept a finish rather than highlight natural color, which suits painted cabinetry or casework. Tambour is supplied unfinished, which allows the material to stretch and acclimate for at least 48 hours before finishing so movement happens before you lock in the topcoat. Each panel is made in the USA from premium North American hardwoods, which supports a solid-wood build and familiar machining behavior.
This tambour panel installs using standard construction or paneling adhesive, which lets you bond it directly to any solid substrate without specialized fasteners. Using adhesive in this way creates a continuous bond line behind the flexible backing, which helps the panel stay tight to curves and flat runs. The flexible backing bends over corners, so it transitions smoothly from vertical to horizontal surfaces on appliance garages or niche surrounds. Because the panel is unfinished paint grade material, it can be fitted, bonded, and then finished in place, which can reduce touch-up work at edges and seams. The 48 inch length offers enough run to cover many upper cabinet heights or appliance garage openings in a single piece, which limits field joints along the grain direction during installation.
The flexible backing on Tambour Panel Style 104 bends so the 1 inch single bead profile can wrap continuous curves, which is useful for appliance garages and radius cabinet ends that need a smooth track of beads. When you attach the panel with standard construction or paneling adhesive to a solid substrate, the adhesive supports the beads along every contact point, which maintains alignment as the panel transitions through an inside or outside radius. The 12 inch width provides a manageable strip that is easy to handle on a bench or at the cabinet, so one person can position and bond it in tighter spaces. The 48 inch length can span a typical upper cabinet or tall niche section, which reduces splicing along the length and helps keep the vertical or horizontal bead lines visually continuous. Because the tambour is unfinished and paint grade, you can integrate it into a painted run and then finish the beaded surface in the same system as adjacent parts.
The solid wood construction from premium North American hardwoods means the beads are cut from hardwood stock, which gives a familiar feel under cutting and sanding tools during any trimming or edge clean-up. The 1 inch single bead spacing creates evenly spaced ribs, which can help hide minor transitions at panel edges because the repeating pattern draws the eye along the run. The 12 inch by 48 inch format works well as a planning unit, since you can count on one panel covering a one-foot-wide by four-foot-long area in your cabinet or wall design. The unfinished, paint grade status lets you handle surface prep and topcoating as part of your normal finishing workflow, which keeps the tambour visually consistent with other painted components. Allowing the material to stretch and acclimate for at least 48 hours before finishing sets up the panel to adjust to shop or site conditions ahead of final coating, which supports a more stable appearance after installation.
The TM104-1248PO panel measures 12 inches wide by 48 inches long, which helps you plan coverage areas and cut layouts around standard cabinet and wall sections.
The 1 inch single bead profile creates evenly spaced ribs across the panel, which delivers a consistent linear pattern that reads cleanly on doors, ends, and appliance garages.
This tambour panel is installed using standard construction or paneling adhesive onto any solid substrate, which creates a continuous bond that supports the flexible backing along curves and flat runs.
The panel is paint grade and unfinished so it can be finished after installation, which aligns it with painted cabinetry and allows surface prep and coating as part of your finishing process.
Tambour that stretches and acclimates for at least 48 hours before finishing adjusts to conditions first, which supports a more stable appearance once topcoated and in service.
This White River tambour panel is made in the USA from premium North American hardwoods, which provides a solid wood workpiece with familiar machining and finishing behavior.
Choose White River Tambour Panel Style 104 when you need a 12 inch by 48 inch paint grade solid wood solution that bends around curves and corners. The 1 inch single bead pattern, flexible backing, and adhesive installation method work together to support smooth appliance garages, radius cabinets, and wall details on solid substrates. The unfinished, premium North American hardwood construction and USA manufacturing give you a solid wood tambour panel that fits directly into a painted cabinet or millwork workflow. Use this TM104-1248PO panel to plan repeatable, beaded surfaces where a consistent pattern and straightforward adhesive bonding matter.