Rev-A-Shelf 487 Craftsman Girasolo 18" Blind Corner Pull-Out, Left Opening-Blind Right Corner Cabinet, 4871CC-18-LMB

Choose this blind corner pull-out

blind corner pull-out gives a base blind cabinet a more reachable storage area by bringing the tray out on a pivoting mechanism. The Rev-A-Shelf blind corner pull-out in this configuration is a one-tray Craftsman-style Girasolo unit with a left door setup for a blind right corner cabinet. It uses a banded wood rim with recessed black wire accents that also work as a handle for easier operation. This soft-close blind corner pull-out is designed for 18 inch blind corner pull-out applications and includes a wood left Girasolo tray, post mechanism, soft-close pivot hardware system, and mounting hardware. The shelf bottom is made from 5/8 inch maple plywood, and the rated load per shelf is 33 lbs.

See blind corner organizer advantages

• Rev-A-Shelf one-tray blind corner organizer - gives access to stored items in a blind corner cabinet where fixed shelves are harder to reach.
• Left door configuration for a blind right corner cabinet - helps buyers match the organizer to the correct cabinet handing before installation.
• Designed for 18 inch base blind cabinet openings - supports planning for cabinet size and opening clearance before ordering.
• Soft-close pivot hardware system - helps the tray move with a more controlled closing action during daily use.
• Banded wood rim with recessed black wire accents - provides a defined tray edge and a built-in handhold for operation.
• 5/8 inch maple plywood shelf bottom - gives the tray a wood base suited to kitchen cabinet storage use.
• 33 lb weight rating per shelf - helps buyers judge whether the tray capacity fits their intended stored items.
• Face frame minimum opening of 18.00 inch W x 23.00 inch D x 18.50 inch H - gives a clear fit target for face frame cabinet applications.
• Frameless minimum opening of 19.50 inch W x 23.00 inch D x 18.50 inch H - helps confirm fit when installing in frameless cabinet construction.
• Included post mechanism and mounting hardware - gives installers the main components needed for a standard product install.

Confirm blind corner pull-out fit

Key specs to confirm: This blind corner organizer is designed for 18 inch base blind cabinet openings and is configured for a left door on a blind right corner cabinet. For a face frame cabinet, the minimum opening is 18.00 inch W x 23.00 inch D x 18.50 inch H. For a frameless cabinet, the minimum opening is 19.50 inch W x 23.00 inch D x 18.50 inch H. Buyers should confirm cabinet construction type, opening width, interior depth, interior height, and the correct left-hand application before purchase. The verified weight rating is 33 lbs per shelf. Any unlisted clearance, adjustment, or installation tolerance details should be confirmed with the manufacturer or technical documentation.

What's included: One wood left Girasolo tray with black wire accents, post mechanism, soft-close pivot hardware system, and mounting hardware.

What to verify before ordering: Confirm face frame or frameless cabinet type, minimum opening size, blind corner handing, door orientation, and whether your stored items fit within the tray area and 33 lb shelf rating. Follow manufacturer installation guidance and local building requirements where applicable.

Use this Girasolo blind corner organizer

Use a blind corner pull-out daily

A blind corner pull-out is often chosen when a standard shelf leaves items buried in the back of a corner base cabinet. In many kitchens, that space becomes hard to use because pans, small appliances, or food containers end up behind the cabinet face where they are difficult to reach. This Rev-A-Shelf blind corner pull-out is built to address that access problem with a one-tray Girasolo layout that pivots out for easier reach.

This specific configuration matters. It is a left opening blind corner pull-out intended for a blind right corner cabinet. That makes handing one of the first details to confirm. A buyer replacing an older organizer, updating a kitchen cabinet interior, or fitting out a new cabinet run should verify that the door and blind corner direction match this version before ordering. If the handing is wrong, the organizer may not install or operate as intended.

The tray design also supports day-to-day use. The banded wood rim helps contain stored items, while the recessed black wire accents double as a handle. That gives the user a clear grip point when pulling the tray into reach. The 5/8 inch maple plywood shelf bottom gives the maple blind corner organizer a wood storage surface, and the soft-close blind corner pull-out hardware helps the tray return with a controlled action.

Installers and serious DIY buyers should also focus on cabinet opening requirements. This unit is designed for 18 inch base blind cabinet openings. For face frame cabinets, the minimum opening is 18.00 inch wide, 23.00 inch deep, and 18.50 inch high. For frameless cabinets, the minimum opening is 19.50 inch wide, 23.00 inch deep, and 18.50 inch high. Those dimensions are central to a clean install. If your cabinet has interior obstructions, unusual hinges, or added plumbing nearby, those conditions should be checked against the manufacturer guidance before purchase.

Compare blind corner organizer fit points

When buyers compare blind corner organizer options, the most useful differences are usually fit, handing, included hardware, and operating style. This Craftsman blind corner pull-out gives a verified set of details that supports a more predictable selection process. It is sold as a one-tray organizer, includes the post mechanism, includes mounting hardware, and uses a soft-close pivot hardware system. Those facts help a buyer understand what arrives with the unit and what type of motion the organizer uses.

The cabinet fit information is also clearly stated. Instead of relying on broad category assumptions, buyers can compare their cabinet to the listed face frame and frameless minimum openings. That is especially useful for a blind right corner cabinet organizer, where a small mismatch in opening width or cabinet type can lead to ordering mistakes.

Material details also matter when comparing products in this category. This Girasolo blind corner organizer uses a banded wood rim, recessed black wire accents, and a 5/8 inch maple plywood shelf bottom. Those are concrete construction details that help buyers evaluate whether the organizer matches the cabinet interior style and intended storage use. The verified 33 lb weight rating per shelf gives another practical checkpoint for planning what will be stored.

For trade buyers, consistency in listed dimensions and included parts can simplify quoting and installation planning. For homeowners, those same details reduce guesswork. If additional clearance requirements, replacement part questions, or adjustment ranges are important to your project, those points should be confirmed before ordering because they are not listed in the verified product data here.

Ask fit questions before ordering

Order the right blind corner organizer

blind corner organizer selection starts with fit, handing, and included hardware. This Rev-A-Shelf Girasolo unit is a one-tray left door organizer for a blind right corner cabinet and includes the tray, post mechanism, soft-close pivot hardware system, and mounting hardware. Before purchase, confirm whether your cabinet is face frame or frameless, check the minimum opening dimensions, and make sure the left-hand application matches your cabinet layout. Those steps help reduce installation issues and ordering mistakes.