Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
blind corner pull-out gives a base blind cabinet a more usable storage area by bringing one tray out on a pivoting mechanism instead of leaving items buried in the corner. The Rev-A-Shelf blind corner pull-out in this configuration is a Craftsman-style Girasolo unit with a banded wood rim, recessed black wire accents that also act as a handle, and a 5/8 inch maple plywood shelf bottom. This Girasolo blind corner organizer is designed for 18 inch blind corner pull-out applications where the cabinet opening and handing match the product requirements. It is built for a right opening setup in a blind left corner cabinet organizer layout and uses a soft-close blind corner pull-out hardware system. Each shelf is rated for 33 lbs.
Key specs to confirm: This blind corner organizer is designed for 18 inch base blind cabinet openings and a right-hand opening layout. For a face frame cabinet, the minimum cabinet opening is 18.00 inch wide x 23.00 inch deep x 18.50 inch high. For a frameless cabinet, the minimum opening is 19.50 inch wide x 23.00 inch deep x 18.50 inch high. Confirm whether your cabinet is face frame or frameless, confirm the blind corner orientation, and confirm that the door opening matches this right opening blind corner pull-out. The verified weight rating is 33 lbs. per shelf. Any other load, clearance, or compliance details should be confirmed with the manufacturer or technical documentation.
What's included: One wood right Girasolo tray with black wire accents, post mechanism, soft-close pivot hardware system, and mounting hardware.
What to verify before ordering: Check cabinet construction, clear opening width, inside depth, inside height, handing, and whether your cabinet is a blind left corner cabinet. Also confirm that nearby hardware, hinges, or interior obstructions will not interfere with tray travel.
A blind corner cabinet often becomes wasted space because stored items slide to the back and stay there. A Girasolo blind corner organizer addresses that problem by moving the tray into a more reachable position. For installers working on kitchen cabinet blind corner storage upgrades, this matters in both remodel and new cabinet work where access is as important as raw storage volume.
This Rev-A-Shelf blind corner pull-out is built for a specific use case: an 18 inch blind corner pull-out application with a right-hand opening in a blind left corner cabinet layout. That means the buyer should not treat it as a universal organizer. The first job is to confirm the cabinet type and opening size. Face frame cabinets need a minimum opening of 18.00 inch wide x 23.00 inch deep x 18.50 inch high. Frameless cabinets need 19.50 inch wide x 23.00 inch deep x 18.50 inch high. Those measurements are the practical filter that prevents ordering errors.
In daily use, the banded wood rim and recessed black wire accents do more than define the tray style. The wire accents also function as a handle, which helps when pulling the tray through the cabinet opening. The 5/8 inch maple plywood shelf bottom gives the tray a wood storage surface suited to common kitchen items, while the soft-close blind corner pull-out hardware system helps the movement finish in a controlled way. For a homeowner or installer trying to improve access without changing the cabinet box, that combination supports smoother operation and a cleaner storage routine.
The verified shelf rating is 33 lbs. per shelf, so buyers can plan storage with a known load figure instead of guessing. If the cabinet has unusual interior conditions, added obstructions, or door and hinge details not covered in the product data, those points should be checked before installation. Following manufacturer installation guidance and local building requirements where applicable is the right next step.
When buyers compare blind corner organizer products, the main differences usually come down to cabinet fit, handing, included hardware, and tray construction. This Rev-A-Shelf unit gives clear verified fit data for both face frame and frameless cabinets, which helps narrow the choice quickly. It also identifies the opening direction and cabinet corner orientation, which is critical because blind corner pull-out products are not interchangeable across all left and right cabinet layouts.
Another useful comparison point is what comes in the package. This product includes one wood right Girasolo tray with black wire accents, the post mechanism, the soft-close pivot hardware system, and mounting hardware. That gives the installer the main operating components listed in the verified data. Buyers should still confirm whether their specific project needs any additional cabinet preparation or clearance adjustments.
Material details also matter when comparing options. This maple blind corner organizer uses a 5/8 inch maple plywood shelf bottom and a banded wood rim. For buyers who want a wood tray rather than a plain wire basket style, that construction detail is a practical differentiator. The black wire accent also doubles as a handle, which adds a functional detail without requiring a separate pull. Instead of focusing on broad claims, it is better to compare organizer products by opening dimensions, handing, included mechanism, and verified shelf capacity. Those are the details that determine whether the organizer fits, installs cleanly, and works as expected in the cabinet.
This blind corner pull-out is designed for 18 inch base blind cabinet openings and must match the required opening size, cabinet type, and right-hand configuration.
This Rev-A-Shelf blind corner pull-out can fit either style if the opening meets the stated minimum dimensions for face frame or frameless construction.
The minimum face frame cabinet opening is 18.00 inch wide x 23.00 inch deep x 18.50 inch high.
The minimum frameless cabinet opening is 19.50 inch wide x 23.00 inch deep x 18.50 inch high.
The right opening blind corner pull-out is made for a specific cabinet handing, so buyers should confirm the blind corner orientation before ordering.
The Girasolo blind corner organizer has a verified weight rating of 33 lbs. per shelf.
This Rev-A-Shelf organizer includes one wood right Girasolo tray with black wire accents, a post mechanism, soft-close pivot hardware, and mounting hardware.
The blind corner organizer includes a soft-close pivot hardware system for controlled closing movement.
The shelf bottom uses 5/8 inch thick maple plywood.
This blind corner pull-out requires confirmed opening size, cabinet style, handing, and interior clearance. Follow manufacturer installation guidance and local building requirements where applicable.
right opening blind corner pull-out works best when the cabinet opening, construction type, and corner orientation are confirmed before purchase. This Rev-A-Shelf unit includes the wood right Girasolo tray with black wire accents, post mechanism, soft-close pivot hardware system, and mounting hardware. Before ordering, verify whether your cabinet is face frame or frameless, match the minimum opening dimensions, and confirm that the blind left corner cabinet layout and interior clearances suit this organizer.
Sold In: 1 Each
