Rev-A-Shelf 4PILU Maple 7/8"W x 57-7/16"H Pilaster System, 4PILU-58-088-20

Choose a Rev-A-Shelf pilaster system

Rev-A-Shelf pilaster system gives installers a clean way to add drawer pullouts inside cabinets using wood uprights and separately sold pilaster brackets. This Rev-A-Shelf wood pilaster system is made from maple and is designed for tall cabinet applications. The pack includes twenty pilaster uprights sized 57.44 inches high by 2.38 inches wide, and each upright can be trimmed down to 7/8 inch for a closer fit. The design keeps pilaster system holes out of sight for a neater finished look. Buyers planning pantry cabinet storage or other cabinet drawer box support setups can use this system with their own wood drawer boxes, which are not included. One 20-pack is enough to outfit five cabinets when the installation uses the required companion hardware.

Use cabinet pilaster uprights for access

• Maple wood pilaster system - gives a wood interior look that pairs with custom drawer pullouts and wood drawer boxes.
• Twenty pilaster uprights per pack - provides enough uprights to outfit five cabinets when used as intended.
• 57.44 inch upright height - supports tall cabinet pilaster system layouts for pantry cabinet storage applications.
• 2.38 inch upright width - gives installers a defined starting size before trimming for cabinet fit.
• Trimmable down to 7/8 inch - helps adapt cabinet pilaster uprights to the opening for a more exact install.
• No visible pilaster system holes - helps maintain a clean cabinet interior appearance after installation.
• Adjustable drawer box height after install - makes it easier to fine tune drawer pullouts once the system is in place.
• Works with your own wood drawer boxes - supports custom cabinet drawer box support layouts instead of forcing one fixed box style.
• Rev-A-Shelf pilaster brackets sold separately - lets buyers choose the matching hardware set for the specific install method.

Confirm wood pilaster system fit

Key specs to confirm: This wood pilaster system includes maple uprights that measure 57.44 inches high by 2.38 inches wide, with a trimmable width down to 7/8 inch. It is designed for tall cabinet applications and is used with your own wood drawer boxes plus Rev-A-Shelf pilaster brackets sold separately. Before ordering, confirm cabinet interior height, side conditions, and whether your layout calls for standard pilaster hardware or a ball-bearing bracket setup. The product description notes that the wood template is sold separately and is not compatible with ball-bearing brackets. Load capacity, compliance details, and any performance ratings are not provided here and should be confirmed through manufacturer technical documentation.

What's included: One bulk pack with twenty maple pilaster uprights. No hardware is included. Drawer boxes are not included. Pilaster brackets, hardware kits, and the wood template are sold separately.

What to verify before ordering: Confirm your cabinet is a tall cabinet application, verify the required upright height, check whether the 2.38 inch width must be trimmed, confirm the number of cabinets being outfitted, and match the correct Rev-A-Shelf hardware and bracket type to your drawer pullouts and drawer box plan.

Plan tall cabinet pilaster system installs

Match drawer pullouts to cabinet use

A tall cabinet pilaster system is often chosen when a shop, installer, or serious DIY buyer wants drawer pullouts inside a pantry or other full-height cabinet without drilling a visible row of system holes into the interior. This Rev-A-Shelf pilaster system is built around maple cabinet pilaster uprights that create a structured mounting point for adjustable drawer box positions after installation. That matters when the final drawer spacing is easier to judge once the cabinet is in place or when stored items vary in height.

For pantry cabinet storage, the main pain point is usually flexibility. Fixed shelves can waste vertical space, while prebuilt inserts may not match the cabinet opening or the buyer's preferred drawer box style. This wood pilaster system addresses that by working with your own wood drawer boxes rather than requiring included boxes. That gives the installer more control over drawer depth, face style, and spacing. The uprights are designed for tall cabinet applications, and the width can be trimmed down to 7/8 inch for a better fit where cabinet conditions require it.

Another common issue is installation efficiency across multiple jobs. This contractor-friendly bulk pack includes twenty uprights, enough to outfit five cabinets, which can help reduce packaging waste and simplify planning for repeated installs. Buyers using base cabinet organizers should note that this specific listing is described for tall cabinet applications, so cabinet height and intended use should be checked before purchase. The required pilaster brackets and hardware are sold separately, so the install is not complete out of the box. If your design calls for ball-bearing brackets, confirm hardware compatibility before ordering the optional wood template because the verified description states that template is not compatible with ball-bearing brackets.

When planning cabinet drawer box support, confirm the cabinet interior dimensions, the number of pullouts needed, and whether your drawer boxes are already built or still being specified. If load requirements or bracket performance details affect your project, those details should be verified directly with the manufacturer.

Compare wood pilaster system options carefully

When buyers compare cabinet pilaster uprights, the most useful differences are usually material, adjustability, visibility inside the cabinet, and how much of the system is included. This Rev-A-Shelf wood pilaster system is clearly defined as a maple upright pack for use with separately purchased hardware and buyer-supplied wood drawer boxes. That makes it a strong fit for projects where the cabinet maker or installer wants control over the final drawer box build rather than a one-piece kit.

The clean interior appearance is another practical point. The verified description states that the system offers a clean look with no visible pilaster system holes. For many cabinet interiors, that matters as much as storage function because the finished cabinet still looks orderly when the pullouts are open. The ability to adjust drawer box height after installation also helps reduce rework when spacing changes during field install.

Bulk packaging can also matter. A twenty-upright pack sized for five cabinets is useful for repeat installations, remodels with several pantry sections, or shop inventory planning. Instead of evaluating only the upfront component count, buyers should compare what still needs to be added to complete the install. In this case, pilaster brackets, hardware kits, and drawer boxes are separate items. That is not a drawback if you need layout control, but it is an important ordering checkpoint.

For reliability in planning, the brand, material, upright dimensions, trimmable width, and intended tall cabinet use are all stated in the verified product data. Buyers should still confirm bracket selection, template compatibility, and any unlisted technical requirements before finalizing the order.

Ask fit questions before ordering

Order a maple pilaster system confidently

Maple pilaster system buyers should focus on cabinet fit, included parts, and bracket compatibility before purchase. This pack includes twenty maple pilaster uprights for tall cabinet applications, enough for five cabinets, with no hardware or drawer boxes included. Confirm the 57.44 inch height, the 2.38 inch width and any trimming needed down to 7/8 inch, plus the correct Rev-A-Shelf pilaster brackets for your install. If you are planning custom drawer pullouts, verify drawer box sizing and any template or ball-bearing bracket requirements before ordering.