Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
12 inch aluminum counter support bracket from the Pro Value Series provides strong, unobtrusive support for countertops, work surfaces, and heavy-duty wall-mounted shelving, so load paths stay reliable without visually dominating the installation. Its one-piece design for strength and stability removes joint flex points, which helps keep counters and shelving level under everyday use. As a workstation and countertop bracket in powder coat black finish, it visually blends with darker surfaces or hardware lines while still handling demanding loads. When used as a counter and support bracket in commercial or residential installs, the 12 inch depth suits typical counter projections, creating a straightforward choice where wall framing is available for anchoring. The Pro Value Series AL-1212-1D part number helps align this bracket with drawings, quotes, and jobsite labeling during project coordination.
This surface-mount aluminum bracket is designed to be attached to wall framing, so the bracket can be fastened directly into studs for load transfer. With proper coordination of vertical framing member locations, additional in-wall blocking may be avoided, which simplifies rough carpentry and shortens preparation time before finishes. Brackets are easily surface-mounted after wall finishes, allowing installers to lay out final bracket positions based on cabinet, stud, or fixture alignment visible on the finished wall. Because each bracket supports up to 450 lbs when attached to framing per manufacturer guidance, bracket count and spacing can be planned around the combined countertop or shelving weight and anticipated loads.
This aluminum countertop support bracket works in countertops, work surfaces, and heavy-duty wall-mounted shelving because the one-piece design and 12 inch format match common depth needs. It serves in custom vanities and countertops where casework alone is not intended to carry all the weight, shifting support into the wall framing for a more robust structure. As part of workstation and countertop bracket layouts, it helps carry concentrated loads from equipment or stored materials back into the studs. The powder coat black finish integrates well where darker counters, shelves, or metal elements are specified, keeping the support visually recessive beneath the surface. Since the bracket supports up to a 7 in. overhang, it is well suited to typical top projections without calling for oversize support arms.
Each bracket supports up to 450 lbs when attached to wall framing per manufacturer recommendations, which gives designers and installers a defined capacity to reference when spacing brackets under stone, solid surface, or dense shelving layouts. The ability to support a wide variety of surface sizes with up to a 7 in. overhang means the bracket can be placed so the top edge aligns with the cabinet or substrate while still backing the outer edge of the work surface. The one-piece design for strength and stability minimizes play at the wall connection area, helping counters and shelving remain flat over time. Aluminum material with recycled content available from the manufacturer aligns with projects that track environmental metrics, while the low-emitting powder coating that meets LEED v4 low-emitting materials requirements supports indoor air quality goals. Because brackets are easily surface-mounted after wall finishes, final alignment can follow tile lines, panel seams, or cabinet reveals without altering the earlier framing steps.
The Pro Value Series AL-1212-1D is a 12 inch aluminum counter and support bracket, so it is suited to typical counter and shelving depths using a compact, structural format.
Each bracket supports up to 450 lbs when attached to wall framing per manufacturer recommendations, allowing bracket spacing to reflect real load requirements for countertops and shelving.
The bracket supports surface sizes with up to a 7 inch overhang, so common counter projections can be achieved while keeping the support arm inside cabinet and wall lines.
The bracket provides strong support for countertops, work surfaces, custom vanities, and heavy-duty wall-mounted shelving, tying those loads back into wall framing.
The one-piece design for strength and stability removes jointed segments, helping counters and shelves remain level and solid when loaded.
The powder coat black finish is a low-emitting material that meets LEED v4 low-emitting materials requirements, supporting indoor environmental quality targets.
The 12 inch aluminum counter and support bracket in powder coat black from the Pro Value Series ties demanding countertop, work surface, and shelving loads into wall framing with a one-piece structural arm. With each bracket supporting up to 450 lbs and allowing up to a 7 in. overhang, layouts for custom vanities, workstations, and heavy-duty wall-mounted shelving can be engineered with clear load values. The aluminum construction with documented recycled content available from the manufacturer and a low-emitting powder-coated finish suits projects pursuing LEED v4 credits or broader sustainability targets. Use the AL-1212-1D bracket wherever a surface-mount, framing-based support simplifies your next countertop or workstation design.
Sold In: 2 Each
